An official website of the United States government
Soft actuators have been studied and analyzed as a new solution for soft robotic technologies. These types of actuators have many advantages due to their predictable deformations and their ease of control, enabling them to hold and move delicate objects performing complex movements in confined spaces. Soft actuators can be made using different manufacturing processes, but the most common is mold casting. However, this manufacturing process involves several steps, increasing the manufacturing time and hindering changes in the design. This paper presents a novel design of a 3D printed soft pneumatic actuator based on additive manufacturing, achieving design versatility and performance. The produced actuator has seven segments that can be individually controlled. The actuators were made using fused deposition modeling (FDM) technology in one continuous process and without support material. The mechanical performance of the soft actuators was demonstrated, analyzing the deformation in the z-axis based on input pressure.
more »
« less
Harnessing Nonuniform Pressure Distributions in Soft Robotic Actuators
Herein, complex motion in soft, fluid‐driven actuators composed of elastomer bladders arranged around a neutral plane and connected by slender tubes is demonstrated. Rather than relying on complex feedback control or multiple inputs, the motion is generated with a single pressure input, leveraging viscous flows within the actuator to produce nonuniform pressure between bladders. Using an accurate predictive model coupling with a large deformation Cosserat rod model and low‐Reynolds‐number flow, all dominating dynamic interactions including extension and curvature are captured with two governing equations. Given insights from this model, five design elements are described and demonstrated in practice. By choosing the relative timescales between the solid, fluid, and input pressure cycles, the tip of the actuator can obtain almost any desired trajectory and can be placed anywhere temporarily within its 2D workspace. Finally, the benefits of viscous‐driven soft actuators are showcased in a six‐legged untethered robot able to walk 0.05 body lengths per second. The foundation is laid for a new class of morphologically intelligent, soft robotic actuators that enables complex deformations and multifunctionality without explicit drivers; whereby generating nonuniform pressure distributions, their infinite degrees of freedom can be exploited.
more »
« less
- Award ID(s):
- 2042411
- PAR ID:
- 10392257
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Intelligent Systems
- Volume:
- 5
- Issue:
- 2
- ISSN:
- 2640-4567
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Current models of bending in soft arms are formulated in terms of experimentally determined, arm-specific parameters, which cannot evaluate fundamental differences in soft robot arm design. Existing models are successful at improving control of individual arms but do not give insight into how the structure of the arm affects the arm’s capabilities. For example, omnidirectional soft robot arms most frequently have three parallel actuators, but may have four or more, while common biological arms, including octopuses, have tens of distinct longitudinal muscle bundles. This article presents a quasi-static analytical model of soft arms bent with longitudinal actuators, based on equilibrium principles and assuming an unknown neutral axis location. The model is presented as a generalizable framework and specifically implemented for an arm with [Formula: see text] fluid-driven actuators, a subset of which are pressurized to induce a bend with a certain curvature and direction. The presented implementation is validated experimentally using planar (2D) and spatial (3D) bends. The planar model is used to initially estimate pressure for a closed-loop curvature control system and to bound the accessible configurations for a rapidly-exploring random trees (RRT) motion planner. A three-segment planar arm is demonstrated to navigate along a planned trajectory through a gap in a wall. Finally, the model is used to explore how the arm morphology affects maximum curvature and directional resolution. This research analytically connects soft arm structure and actuator behavior to unloaded arm performance, and the results may be used to methodically design soft robot arms.more » « less
-
Soft and continuously controllable grippers can be assembled from fluidic prestressed composite (FPC) actuators. Due to their highly deformable features, it is difficult to model such actuators for large deflections. This article proposes a new method for modeling large deflections of FPC actuators called the chained composite model (CCM) to characterize the quasi-static response to an applied fluid pressure and load. The CCM divides an FPC actuator into discrete elements and models each element by a small rotation model. The strain energy of each element and the work done by pressure and loads are computed using third-order displacement polynomials with unknown coefficients; then, the total energy is minimized to calculate stable shapes using the Rayleigh–Ritz method. This study provides a set of systematic design rules to help the robotics community create FPC actuators by understanding how their responses vary as a function of input forces and pressures for a number of modeling and design parameters. Composite actuators are fabricated and a soft gripper is developed to demonstrate the grasping ability of the FPCactuators. Pneumatic pressure and end loads are applied to the composite actuators, and their responses are measured. The modeled responses of the actuators are shown to be in agreement with the measured responses.more » « less
-
Fluidic soft actuators are enlarging the robotics toolbox by providing flexible elements that can display highly complex deformations. Although these actuators are adaptable and inherently safe, their actuation speed is typically slow because the influx of fluid is limited by viscous forces. To overcome this limitation and realize soft actuators capable of rapid movements, we focused on spherical caps that exhibit isochoric snapping when pressurized under volume-controlled conditions. First, we noted that this snap-through instability leads to both a sudden release of energy and a fast cap displacement. Inspired by these findings, we investigated the response of actuators that comprise such spherical caps as building blocks and observed the same isochoric snapping mechanism upon inflation. Last, we demonstrated that this instability can be exploited to make these actuators jump even when inflated at a slow rate. Our study provides the foundation for the design of an emerging class of fluidic soft devices that can convert a slow input signal into a fast output deformation.more » « less
-
Soft pneumatic actuators have become indispensable for many robotic applications due to their reliability, safety, and design flexibility. However, the currently available actuator designs can be challenging to fabricate, requiring labor-intensive and time-consuming processes like reinforcing fiber wrapping and elastomer curing. To address this issue, we propose to use simple-to-fabricate kirigami skins—plastic sleeves with carefully arranged slit cuts—to construct pneumatic actuators with pre-programmable motion capabilities. Such kirigami skin, wrapped outside a cylindrical balloon, can transform the volumetric expansion from pneumatic pressure into anisotropic stretching and shearing, creating a combination of axial extension and twisting in the actuator. Moreover, the kirigami skin exhibits out-of-plane buckling near the slit cut, which enables high stretchability. To capture such complex deformations, we formulate and experimentally validates a new kinematics model to uncover the linkage between the kirigami cutting pattern design and the actuator’s motion characteristics. This model uses a virtual fold and rigid-facet assumption to simplify the motion analysis without sacrificing accuracy. Moreover, we tested the pressure-stroke performance and elastoplastic behaviors of the kirigami-skinned actuator to establish an operation protocol for repeatable performance. Analytical and experimental parametric analysis shows that one can effectively pre-program the actuator’s motion performance, with considerable freedom, simply by adjusting the angle and length of the slit cuts. The results of this study can establish the design and analysis framework for a new family of kirigami-skinned pneumatic actuators for many robotic applications.more » « less
