Snap‐through bistability is often observed in nature (e.g., fast snapping to closure of Venus flytrap) and the life (e.g., bottle caps and hair clippers). Recently, harnessing bistability and multistability in different structures and soft materials has attracted growing interest for high‐performance soft actuators and soft robots. They have demonstrated broad and unique applications in high‐speed locomotion on land and under water, adaptive sensing and fast grasping, shape reconfiguration, electronics‐free controls with a single input, and logic computation. Here, an overview of integrating bistable and multistable structures with soft actuating materials for diverse soft actuators and soft/flexible robots is given. The mechanics‐guided structural design principles for five categories of basic bistable elements from 1D to 3D (i.e., constrained beams, curved plates, dome shells, compliant mechanisms of linkages with flexible hinges and deformable origami, and balloon structures) are first presented, alongside brief discussions of typical soft actuating materials (i.e., fluidic elastomers and stimuli‐responsive materials such as electro‐, photo‐, thermo‐, magnetic‐, and hydro‐responsive polymers). Following that, integrating these soft materials with each category of bistable elements for soft bistable and multistable actuators and their diverse robotic applications are discussed. To conclude, perspectives on the challenges and opportunities in this emerging field are considered.
Matching the rich multimodality of natural organisms, i.e., the ability to transition between crawling and swimming, walking and jumping, etc., represents a grand challenge in the fields of soft and bio‐inspired robotics. Here, a multimodal soft robot locomotion using highly compact and dynamic bistable soft actuators is achieved. These actuators are composed of a prestretched membrane sandwiched between two 3D printed frames with embedded shape memory alloy (SMA) coils. The actuator can swiftly transform between two oppositely curved states and generate a force of 0.3 N through a snap‐through instability that is triggered after 0.2 s of electrical activation with an input power of 21.1 ± 0.32
- Award ID(s):
- 2047912
- NSF-PAR ID:
- 10392636
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Technologies
- Volume:
- 8
- Issue:
- 2
- ISSN:
- 2365-709X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Light has been recently intensively explored to power robots. However, most existing light‐driven robots have limited locomotion modalities, with constrained locomotion capabilities. A light‐powered soft robot with a bioinspired design is demonstrated, which can crawl on ground, squeeze its way through a small channel, and jump over a barrier. The arch‐shaped robot is made up of liquid crystal elastomer–carbon nanotube composite. When a light source with a power intensity of around 1.57 W cm−2is scanned over the surface of the robot, it deforms and crawls forward. With an increase in the light scanning speed, it can deform sufficiently to pass through a channel 25% lower than its body height. Subjected to light irradiation, it can also deform to a closed loop, gradually store elastic energy, and suddenly release it to jump over a wall or onto a step quickly, with a jumping distance around eight times its body length and jumping height around five times its body height. Mathematical models for quantitatively understanding the multimodal locomotion of this light‐powered soft robot are also presented.
-
more » « less
Abstract Soft actuators are typically designed to be inherently stress‐free and stable. Relaxing such a design constraint allows exploration of harnessing mechanical prestress and elastic instability to achieve potential high‐performance soft robots. Here, the strategy of prestrain relaxation is leveraged to design pre‐curved soft actuators in 2D and 3D with tunable monostability and bistability that can be implemented for multifunctional soft robotics. By bonding stress‐free active layer with embedded pneumatic channels to a uniaxially or biaxially pre‐stretched elastomeric strip or disk, pre‐curved 2D beam‐like bending actuators and 3D doming actuators are generated after prestrain release, respectively. Such pre‐curved soft actuators exhibit tunable monostable and bistable behavior under actuation by simply manipulating the prestrain and the biased bilayer thickness ratio. Their implications in multifunctional soft robotics are demonstrated in achieving high performance in manipulation and locomotion, including energy‐efficient soft gripper to holding objects through prestress, fast‐speed larva‐like jumping soft crawler with average locomotion speed of 0.65 body‐length s−1(51.4 mm s−1), and fast swimming bistable jellyfish‐like soft robot with an average speed of 53.3 mm s−1.
-
more » « less
Although soft devices (grippers, actuators, and elementary robots) are rapidly becoming an integral part of the broad field of robotics, autonomy for completely soft devices has only begun to be developed. Adaptation of conventional systems of control to soft devices requires hard valves and electronic controls. This paper describes completely soft pneumatic digital logic gates having a physical scale appropriate for use with current (macroscopic) soft actuators. Each digital logic gate utilizes a single bistable valve—the pneumatic equivalent of a Schmitt trigger—which relies on the snap-through instability of a hemispherical membrane to kink internal tubes and operates with binary high/low input and output pressures. Soft, pneumatic NOT, AND, and OR digital logic gates—which generate known pneumatic outputs as a function of one, or multiple, pneumatic inputs—allow fabrication of digital logic circuits for a set–reset latch, two-bit shift register, leading-edge detector, digital-to-analog converter (DAC), and toggle switch. The DAC and toggle switch, in turn, can control and power a soft actuator (demonstrated using a pneu-net gripper). These macroscale soft digital logic gates are scalable to high volumes of airflow, do not consume power at steady state, and can be reconfigured to achieve multiple functionalities from a single design (including configurations that receive inputs from the environment and from human users). This work represents a step toward a strategy to develop autonomous control—one not involving an electronic interface or hard components—for soft devices.
-
This study presents a modular, electronics‐free, and fully onboard control and actuation approach for shape memory alloy (SMA)‐based soft robots to achieve locomotion tasks. This approach exploits the nonlinear mechanics of compliant curved beams and carefully designed mechanical control circuits to create and synchronize rhythmic deformation cycles, mimicking the central pattern generators prevalent in animal locomotions. More specifically, the study elucidates a new strategy to amplify the actuation performance of the shape memory coil actuator by coupling it to a carefully designed, monostable curve beam with a snap‐through buckling behavior. Such SMA‐curved beam assembly is integrated with an entirely mechanical circuit featuring a slider mechanism. This circuit can automatically cut off and supply current to the SMA according to its deformation status, generating a self‐sustained rhythmic deformation cycle using a simple DC power supply. Finally, this study presents a new strategy to coordinate (synchronize) two rhythmic deformation cycles from two robotic modules to achieve efficient crawling locomotion but still use a single DC power. This work represents a significant step toward fully autonomous, electronics‐free SMA‐based locomotion robots with fully onboard actuation and control.more » « less
