An official website of the United States government
Purpose of review: The formation of a pre-metastatic niche (PMN), in which primary cancer cells prime the distant site to be favorable to their engraftment and survival, may help explain the strong osteotropism observed in multiple cancers, such as breast and prostate. PMN formation, which includes extracellular matrix remodeling, increased angiogenesis and vascular permeability, enhanced bone marrow-derived cell recruitment and immune suppression, has mostly been described in soft tissues. In this review, we summarize current literature of PMN formation in bone. We also present evidence of a potential role for osteocytes to be the primary mediators of PMN development. Recent findings: Osteocytes regulate the bone microenvironment in myriad ways beyond canonical bone tissue remodeling, including changes that contribute to PMN formation. Perilacunar tissue remodeling, which has been observed in both bone and non-bone metastatic cancers, is a potential mechanism by which osteocyte-cancer cell signaling stimulates changes to the bone microenvironment. Osteocytes also protect against endothelial permeability, including that induced by cancer cells, in a loading-mediated process. Finally, osteocytes are potent regulators of cells within the bone marrow, including progenitors and immune cells, and might be involved in this aspect of PMN formation. Osteocytes should be examined for their role in PMN formation.
more »
« less
A Bioreactor for 3D In Vitro Modeling of the Mechanical Stimulation of Osteocytes
The bone is a mechanosensitive organ that is also a common metastatic site for prostate cancer. However, the mechanism by which the tumor interacts with the bone microenvironment to further promote disease progression remains to be fully understood. This is largely due to a lack of physiological yet user-friendly models that limit our ability to perform in-depth mechanistic studies. Here, we report a tunable bioreactor which facilitates the 3D culture of the osteocyte cell line, MLO-Y4, in a hydroxyapatite/tricalcium phosphate (HA/TCP) scaffold under constant fluidic shear stress and tunable hydrostatic pressure within physiological parameters. Increasing hydrostatic pressure was sufficient to induce a change in the expression of several bone remodeling genes such as Dmp1, Rankl, and Runx2. Furthermore, increased hydrostatic pressure induced the osteocytes to promote the differentiation of the murine macrophage cell line RAW264.7 toward osteoclast-like cells. These results demonstrate that the bioreactor recapitulates the mechanotransduction response of osteocytes to pressure including the measurement of their functional ability in a 3D environment. In conclusion, the bioreactor would be useful for exploring the mechanisms of osteocytes in bone health and disease.
more »
« less
- Award ID(s):
- 2029139
- PAR ID:
- 10395737
- Date Published:
- Journal Name:
- Frontiers in Bioengineering and Biotechnology
- Volume:
- 10
- ISSN:
- 2296-4185
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Osteocytes’ response to dynamic loading plays a crucial role in regulating the bone mass but quickly becomes saturated such that downstream induction of bone formation plateaus. The underlying mechanisms that downregulate osteocytes’ sensitivity and overall response to loading remain unknown. In other cell types, purinergic signaling through the P2Y2 receptor has the potential to downregulate the sensitivity to loading by modifying cell stiffness through actin polymerization and cytoskeleton organization. Herein, we examined the role of P2Y2 activation in regulating osteocytes’ mechanotransduction using a P2Y2 knockout cell line alongside conditional knockout mice. Our findings demonstrate that the absence of P2Y2 expression in MLO-Y4 cells prevents actin polymerization while increasing the sensitivity to fluid flow–induced shear stress. Deleting osteocytes’ P2Y2 expression in conditional-knockout mice enabled bone formation to increase when increasing the duration of exercise. Overall, P2Y2 activation under loading produces a negative feedback loop, limiting osteocytes’ response to continuous loading by shifting the sensitivity to mechanical strain through actin stress fiber formation.more » « less
-
Abstract Transient plasma membrane disruptions (PMD) occur in osteocytes with in vitro and in vivo loading, initiating mechanotransduction. The goal here was to determine whether osteocyte PMD formation or repair is affected by aging. Osteocytes from old (24 months) mice developed fewer PMD (−76% females, −54% males) from fluid shear than young (3 months) mice, and old mice developed fewer osteocyte PMD (−51%) during treadmill running. This was due at least in part to decreased pericellular matrix production, as studies revealed that pericellular matrix is integral to formation of osteocyte PMD, and aged osteocytes produced less pericellular matrix (−55%). Surprisingly, osteocyte PMD repair rate was faster (+25% females, +26% males) in osteocytes from old mice, and calcium wave propagation to adjacent nonwounded osteocytes was blunted, consistent with impaired mechanotransduction downstream of PMD in osteocytes with fast PMD repair in previous studies. Inducing PMD via fluid flow in young osteocytes in the presence of oxidative stress decreased postwounding cell survival and promoted accelerated PMD repair in surviving cells, suggesting selective loss of slower‐repairing osteocytes. Therefore, as oxidative stress increases during aging, slower‐repairing osteocytes may be unable to successfully repair PMD, leading to slower‐repairing osteocyte death in favor of faster‐repairing osteocyte survival. Since PMD are an important initiator of mechanotransduction, age‐related decreases in pericellular matrix and loss of slower‐repairing osteocytes may impair the ability of bone to properly respond to mechanical loading with bone formation. These data suggest that PMD formation and repair mechanisms represent new targets for improving bone mechanosensitivity with aging.more » « less
-
Abstract In tissue engineering, once a scaffold has completed mechanical property testing, it must then undergo biological characterization which determines if the scaffold is capable of supporting cell viability. To perform biological tests, cells must be seeded onto a scaffold with the help of bioreactors, the four main types being: (i) rotating wall, (ii) spinner flask, (iii) compression, and (iv) perfusion bioreactor. In perfusion bioreactors, a consistent flow of material is introduced (using a pump) into the inlet of the bioreactor chamber where multiple scaffolds of a disc geometry are located. However, the intrinsic, complex interaction between the scaffolds and material flow as it goes through the bioreactor chamber affects the viability of the seeded stem cells. Therefore, there is a need to identify consequential fluid dynamics phenomena governing the material flow in a perfusion bioreactor. In this study, using a CFD model, the effects of critical scaffold parameters (such as the number of scaffolds, scaffold diameter, scaffold thickness, and number of pores) on the main flow properties (i.e., flow pressure, wall shear stress, and streamline velocity) influential in cell proliferation and bone development will be investigated. It was observed that increasing the number of pores, in addition to decreasing the pore diameter had an adverse effect on the maximum forces occurring on the scaffold. In addition, changing the overall scaffold diameter did not appear to have as much as an effect as the other parameters. Furthermore, it was observed that a decrease in porosity would lead to an increase in wall shear stress and consequently in cell death. Overall, the outcomes of this study pave the way for optimal design, fabrication, and preparation of cell-laden bone scaffolds for treatment of bone fractures in clinical settings.more » « less
-
Babski-Reeves, K; Eksioglu, B; Hampton, D. (Ed.)Traditional static cell culture methods don't guarantee access to medium inside areas or through the scaffolds because of the complex three-dimensional nature of the 3D bio-printed scaffolds. The bioreactor provides the necessary growth medium encapsulated and seeded cells in 3D bioprinted scaffolds. The constant flow of new growing medium could promote more viable and multiplying cells. Therefore, we created a specialized perfusion bioreactor that dynamically supplies the growth medium to the cells implanted or encapsulated in the scaffolds. A redesigned configuration of our developed bioreactor may enhance the in vivo stimuli and circumstances, ultimately improving the effectiveness of tissue regeneration. This study investigated how different scaffold pore shapes and porosities affect the flow. We employed a simulation technique to calculate fluid flow turbulence across several pore geometries, including uniform triangular, square, circular, and honeycomb. We constructed a scaffold with changing pore diameters to examine the fluid movement while maintaining constant porosity. The impact of fluid flow was then determined by simulating and mimicking the architecture of bone tissue. The best scaffold designs were chosen based on the findings.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3389/fbioe.2022.797542
