The use of covalent organic frameworks (COFs) for hazardous radioiodine capture has been highly sought after recently. However, the synthesis of high-performance COF adsorbents while circumventing the limitations of traditional solvothermal methods remains largely unexplored. Herein, we for the first time combine microwave-assisted synthesis and mixed-linker strategy to fabricate multivariate COF adsorbents (X% OMe-TFB-BD COFs, X% = 0, 33, 50, 67, and 100 mol%) with varying ratios of benzidine (BD) and 3,3′-dimethoxylbenzidine (BD-OMe) linkers in a rapid and facile manner. Adjusting the BD-OMe/BD mole ratios has led to distinct variations in density, crystallinity, porosity, morphology, and thermal/chemical stability of the resultant COFs, which empowered fine-tuning of the adsorption performance towards static iodine vapor. Remarkably, the 50 % OMe-TFB-BD COF exhibited an ultrahigh iodine adsorption capability of 8.2 g g−1, surpassing those of single-component COFs, mixed-linker COFs with other methoxy content, physically blended mixtures, and most existing COF adsorbents. Moreover, 50 % OMe-TFB-BD COF was recyclable seven times without obvious loss in its adsorption capacity. This work underscores the substantial potential of microwave-assisted mixed-linker strategy as a viable approach for developing multivariate COFs with shortened reaction times, precisely tailored pore environment, and tunable sorption properties, which are of considerable promise for environmental remediation and other niche applications.
more »
« less
Threefold reactivity of a COF-embedded rhenium catalyst: reductive etherification, oxidative esterification or transfer hydrogenation
The reactivity of the novel Re( i ) catalyst [Re( C12 Anth-py 2 )(CO) 3 Br] is modulated by its interactions with the covalent organic framework (COF) TFB-BD. The complex catalyzes either reductive etherification, oxidative esterification, or transfer hydrogenation depending on its local environment (embedded in TFB-BD, in homogeneous solution or co-incubated with TFB-BD, respectively). The results highlight that COFs can drastically modulate the reactivity of homogeneous catalysts.
more »
« less
- Award ID(s):
- 2109175
- PAR ID:
- 10398842
- Date Published:
- Journal Name:
- Chemical Communications
- Volume:
- 58
- Issue:
- 86
- ISSN:
- 1359-7345
- Page Range / eLocation ID:
- 12074 to 12077
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)The halogen-bond (X-bond) donors 1,3- and 1,4-diiodotetrafluorobenzene (1,3-di-I-tFb and 1,4-di-I-tFb, respectively) form cocrystals with trans-1,2-bis(2-pyridyl)ethylene (2,2′-bpe) assembled by N···I X-bonds. In each cocrystal, 2(1,3-di-I-tFb)·2(2,2′-bpe) and (1,4-di-I-tFb)·(2,2′-bpe), the donor molecules support the C=C bonds of 2,2′-bpe to undergo an intermolecular [2+2] photodimerization. UV irradiation of each cocrystal resulted in stereospecific and quantitative conversion of 2,2′-bpe to rctt-tetrakis(2-pyridyl)cyclobutane (2,2′-tpcb). In each case, the reactivity occurs via face-to-face π-stacked columns wherein nearest-neighbor pairs of 2,2′-bpe molecules lie sandwiched between X-bond donor molecules. Nearest-neighbor C=C bonds are stacked criss-crossed in both cocrystals. The reactivity was ascribed to the olefins undergoing pedal-like motion in the solid state. The stereochemistry of 2,2′-tpcb is confirmed in cocrystals 2(1,3-di-I-tFb)·(2,2′-tpcb) and (1,4-di-I-tFb)·(2,2′-tpcb).more » « less
-
null (Ed.)Combining strain-promoted azide–alkyne cycloaddition (SPAAC) and inorganic click (iClick) reactivity provides access to metal 1,2,3-triazolates. Experimental and computational insights demonstrate that iClick reactivity of the tested metal azides (LM-N 3 , M = Au, W, Re, Ru and Pt) depends on the accessibility of the azide functionality rather than electronic effects imparted by the metal. SPAAC iClick reactivity with cyclooctyne is observed when the azide functionality is sterically unencumbered, e.g. [Au(N 3 )(PPh 3 )] (Au–N3), [W(η 3 -allyl)(N 3 )(bpy)(CO) 2 ] (W–N3), and [Re(N 3 )(bpy)(CO) 3 ] [bpy = 2,2′-bipyridine] (Re–N3). Increased steric bulk and/or preequilibria with high activation barriers prevent SPAAC iClick reactivity for the complexes [Ru(N 3 )(Tp)(PPh 3 ) 2 ] [Tp = tris(pyrazolyl)borate] (Ru–N3), [Pt(N 3 )(CH 3 )(P i Pr 3 ) 2 ] [ i Pr = isopropyl] (Pt(II)–N3), and [Pt(N 3 )(CH 3 ) 3 ] 4 ((PtN3)4). Based on these computational insights, the SPAAC iClick reactivity of [Pt(N 3 )(CH 3 ) 3 (P(CH 3 ) 3 ) 2 ] (Pt(IV)–N3) was successfully predicted.more » « less
-
more » « less
The ditopic halogen-bond (X-bond) donors 1,2-, 1,3-, and 1,4-diiodotetrafluorobenzene (1,2-, 1,3-, and 1,4-di-I-tFb, respectively) form binary cocrystals with the unsymmetrical ditopic X-bond acceptor trans-1-(2-pyridyl)-2-(4-pyridyl)ethylene (2,4-bpe). The components of each cocrystal (1,2-di-I-tFb)·(2,4-bpe), (1,3-di-I-tFb)·(2,4-bpe), and (1,4-di-I-tFb)·(2,4-bpe) assemble via N···I X-bonds. For (1,2-di-I-tFb)·(2,4-bpe) and (1,3-di-I-tFb)·(2,4-bpe), the X-bond donor supports the C=C bonds of 2,4-bpe to undergo a topochemical [2+2] photodimerization in the solid state: UV-irradiation of each solid resulted in stereospecific, regiospecific, and quantitative photodimerization of 2,4-bpe to the corresponding head-to-tail (ht) or head-to-head (hh) cyclobutane photoproduct, respectively.
-
more » « less
Abstract In the decades, the use of scatterometer data allowed to demonstrate the global ubiquity of the ocean mesoscale thermal feedback (TFB) and current feedback (CFB) effects on surface winds and stress. Understanding these air‐sea interactions is of uttermost importance as the induced atmospheric anomalies partly control the ocean circulation and thus can influence the Earth climate. Whether the TFB and CFB effects can be disentangled, and whether satellite scatterometers can properly reveal them, remain rather unclear. Here, using satellite observations and ocean‐atmosphere coupled mesoscale simulations over 45°S to 45°N, we show that the CFB effect can be properly characterized and unraveled from that due to the TFB. We demonstrate that the TFB can be unambiguously characterized by its effect on the stress (and wind) divergence and magnitude. However, its effect on the wind and stress curl is contaminated by the CFB and thus cannot be estimated from scatterometer data. Finally, because scatterometers provide equivalent neutral stability winds relative to the oceanic currents, they cannot characterize adequately the CFB wind response and overestimate the TFB wind response by ≈25%. Surface stress appears to be the more appropriate variable to consider from scatterometer data.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D2CC03173F
