Integrated photonics at near-IR (NIR) wavelengths currently lacks high bandwidth and low-voltage modulators, which add electro-optic functionality to passive circuits. Here, integrated hybrid thin-film lithium niobate (TFLN) electro-optic Mach–Zehnder modulators (MZM) are shown, using TFLN bonded to planarized silicon nitride waveguides. The design does not require TFLN etching or patterning. The push–pull MZM achieves a half-wave voltage length product (
Strategies for improved fabrication of integrated thin-film lithium niobate electro-optic (EO) Mach–Zehnder modulators (MZMs) are reported using scalable processes and designs. The MZM devices utilize direct bonding of unetched and unpatterned thin-film lithium niobate to patterned and planarized silicon photonic microchips. The latter contains silicon nitride waveguide structures of various widths that are used to form hybrid modes that are suitable for high-bandwidth low-voltage EO modulators based on Pockels effect. We report that the incorporation of appropriately designed outgassing channels and certain modifications to key processing steps helped achieve a greater than 99% reduction in void density during bonding. Void reduction is critically important for these traveling-wave hybrid MZM devices in which the optical mode is controllably distributed between multiple thin layers and propagates over millimeter-scale lengths.
more » « less- NSF-PAR ID:
- 10399179
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Journal of the Optical Society of America B
- Volume:
- 40
- Issue:
- 5
- ISSN:
- 0740-3224; JOBPDE
- Page Range / eLocation ID:
- Article No. D5
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
V π L ) of 0.8 V.cm at 784 nm. MZM devices with 0.4 cm and 0.8 cm modulation length show a broadband electro-optic response with a 3 dB bandwidth beyond 100 GHz, with the latter showing a record bandwidth to half-wave voltage ratio of 100 GHz/V and a high extinction ratio exceeding 30 dB. Such fully integrated high-performance NIR electro-optic devices may benefit data communications, analog signal processing, test and measurement instrumentation, quantum information processing and other applications. -
more » « less
Electro-optic modulators (EOMs) convert signals from the electrical to the optical domain. They are at the heart of optical communication, microwave signal processing, sensing, and quantum technologies. Next-generation EOMs require high-density integration, low cost, and high performance simultaneously, which are difficult to achieve with established integrated photonics platforms. Thin-film lithium niobate (LN) has recently emerged as a strong contender owing to its high intrinsic electro-optic (EO) efficiency, industry-proven performance, robustness, and, importantly, the rapid development of scalable fabrication techniques. The thin-film LN platform inherits nearly all the material advantages from the legacy bulk LN devices and amplifies them with a smaller footprint, wider bandwidths, and lower power consumption. Since the first adoption of commercial thin-film LN wafers only a few years ago, the overall performance of thin-film LN modulators is already comparable with, if not exceeding, the performance of the best alternatives based on mature platforms such as silicon and indium phosphide, which have benefited from many decades of research and development. In this mini-review, we explain the principles and technical advances that have enabled state-of-the-art LN modulator demonstrations. We discuss several approaches, their advantages and challenges. We also outline the paths to follow if LN modulators are to improve further, and we provide a perspective on what we believe their performance could become in the future. Finally, as the integrated LN modulator is a key subcomponent of more complex photonic functionalities, we look forward to exciting opportunities for larger-scale LN EO circuits beyond single components.
-
more » « less
Abstract High performance organic electro‐optic (OEO) materials enable ultrahigh bandwidth, small footprint, and extremely low drive voltage in silicon‐organic hybrid and plasmonic‐organic hybrid photonic devices. However, practical OEO materials under device‐relevant conditions are generally limited to performance of
≈ 300 pm V−1(10× the EO response of lithium niobate). By means of theory‐guided design, a new series of OEO chromophores is demonstrated, based on strong bis(4‐dialkylaminophenyl)phenylamino electron donating groups, capable of EO coefficients (r 33) in excess of 1000 pm V−1. Density functional theory modeling and hyper‐Rayleigh scattering measurements are performed and confirm the large improvement in hyperpolarizability due to the stronger donor. The EO performance of the exemplar chromophore in the series, BAY1, is evaluated neat and at various concentrations in polymer host and shows a nearly linear increase inr 33and poling efficiency (r 33/E p, Epis poling field) with increasing chromophore concentration. 25 wt% BAY1/polymer composite shows a higher poling efficiency (3.9± 0.1 nm2V−2) than state‐of‐the‐art neat chromophores. Using a high‐ε charge blocking layer with BAY1, a record‐highr 33(1100± 100 pm V−1) and poling efficiency (17.8± 0.8 nm2V−2) at 1310 nm are achieved. This is the first reported OEO material with electro‐optic response larger than thin‐film barium titanate. -
more » « less
Thin-film lithium niobate (TFLN) is a promising electro-optic (EO) photonics platform with high modulation bandwidth, low drive voltage, and low optical loss. However, EO modulation in TFLN is known to relax on long timescales. Instead, thermo-optic heaters are often used for stable biasing, but heaters incur challenges with cross-talk, high power, and low bandwidth. Here, we characterize the low-frequency (1 mHz to 1 MHz) EO response of TFLN modulators, investigate the root cause of EO relaxation and demonstrate methods to improve bias stability. We show that relaxation-related effects can enhance EO modulation across a frequency band spanning 1kHz to 20kHz in our devices – a counter-intuitive result that can confound measurement of half-wave voltage (
V π ) in TFLN modulators. We also show that EO relaxation can be slowed by more than 104-fold through control of the LN-metal interface and annealing, offering progress toward lifetime-stable EO biasing. Such robust EO biasing would enable applications for TFLN devices where cross-talk, power, and bias bandwidth are critical, such as quantum devices, high-density integrated photonics, and communications. -
more » « less
Abstract Integrated electro-optic (EO) modulators are fundamental photonics components with utility in domains ranging from digital communications to quantum information processing. At telecommunication wavelengths, thin-film lithium niobate modulators exhibit state-of-the-art performance in voltage-length product (
V π L ), optical loss, and EO bandwidth. However, applications in optical imaging, optogenetics, and quantum science generally require devices operating in the visible-to-near-infrared (VNIR) wavelength range. Here, we realize VNIR amplitude and phase modulators featuringV π L ’s of sub-1 V ⋅ cm, low optical loss, and high bandwidth EO response. Our Mach-Zehnder modulators exhibit aV π L as low as 0.55 V ⋅ cm at 738 nm, on-chip optical loss of ~0.7 dB/cm, and EO bandwidths in excess of 35 GHz. Furthermore, we highlight the opportunities these high-performance modulators offer by demonstrating integrated EO frequency combs operating at VNIR wavelengths, with over 50 lines and tunable spacing, and frequency shifting of pulsed light beyond its intrinsic bandwidth (up to 7x Fourier limit) by an EO shearing method.
