We vary the inflow properties in a finite-volume solver to investigate their effects on the computed cyclonic motion in a right-cylindrical vortex chamber. The latter comprises eight tangential injectors through which steady-state air is introduced under incompressible and inviscid conditions. To minimize cell skewness around injectors, a fine tetrahedral mesh is implemented first and then converted into polyhedral elements, namely, to improve convergence characteristics and precision. Once convergence is achieved, our principal variables are evaluated and compared using a range of inflow parameters. These include the tangential injector speed, count, diameter, and elevation. The resulting computations show that well-resolved numerical simulations can properly predict the forced vortex behavior that dominates in the core region as well as the free vortex tail that prevails radially outwardly, beyond the point of peak tangential speed. It is also shown that augmenting the mass influx by increasing the number of injectors, injector size, or average injection speed further amplifies the vortex strength and all peak velocities while shifting the mantle radially inwardly. Overall, the axial velocity is found to be the most sensitive to vertical displacements of the injection plane. By raising the injection plane to the top half portion of the chamber, the flow character is markedly altered, and an axially unidirectional vortex is engendered, particularly, with no upward motion or mantle formation. Conversely, the tangential and radial velocities are found to be axially independent and together with the pressure distribution prove to be the least sensitive to injection plane relocations.
more »
« less
Effects of Varying Characteristic Injection Parameters and Geometric Configurations on the Cyclonic Flowfield in a Bidirectional Vortex Chamber Using Velocity Inlet Conditions
We vary the inflow properties in a finite-volume solver to investigate their effects on the computed cyclonic motion in a right-cylindrical vortex chamber. The latter comprises eight tangential injectors through which steady-state air is introduced under incompressible and inviscid conditions. To minimize cell skewness around injectors, a fine tetrahedral mesh is implemented first and then converted into polyhedral elements, namely, to improve convergence characteristics and precision. Once convergence is achieved, our principal variables are evaluated and compared using a range of inflow parameters. These include the tangential injector speed, count, diameter, and elevation. The resulting computations show that well-resolved numerical simulations can properly predict the forced vortex behavior that dominates in the core region as well as the free vortex tail that prevails radially outwardly, beyond the point of peak tangential speed. It is also shown that augmenting the mass influx by increasing the number of injectors, injector size, or average injection speed, further amplifies the vortex strength and all peak velocities while shifting the mantle radially inwardly. Overall, the axial velocity is found to be the most sensitive to vertical displacements of the injection plane. By raising the injection plane to the top half portion of the chamber, the flow character is markedly altered, and an axially unidirectional vortex is engendered, particularly, with no upward motion or mantle formation. Conversely, the tangential and radial velocities are found to be axially independent and together with the pressure distribution prove to be the least sensitive to injection plane relocations.
more »
« less
- Award ID(s):
- 1761675
- NSF-PAR ID:
- 10402491
- Date Published:
- Journal Name:
- AIAA SCITECH 2023 Forum
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)This work focuses on the use of a finite-volume solver to describe the wall-bounded cyclonic flowfield that evolves in a swirl-driven thrust chamber. More specifically, a non-reactive, cold-flow simulation is carried out using an idealized chamber configuration of a square-shaped, right-cylindrical enclosure with eight tangential injectors and a variable nozzle size. For simplicity, we opt for air as the working fluid and perform our simulations under steady, incompressible, and inviscid flow conditions. First, a meticulously developed mesh that consists of tetrahedral elements is generated in a manner to minimize the overall skewness, especially near injectors; second, this mesh is converted into a polyhedral grid to improve convergence characteristics and accuracy. After achieving convergence in all variables, our three velocity components are examined and compared to an existing analytical solution obtained by Vyas and Majdalani (Vyas, A. B., and Majdalani, J., “Exact Solution of the Bidirectional Vortex,” AIAA Journal, Vol. 44, No. 10, 2006, pp. 2208-2216). We find that the numerical model is capable of predicting the expected forced vortex behavior in the inner core region as well as the free vortex tail in the inviscid region. Moreover, the results appear to be in fair agreement with the Vyas–Majdalani solution derived under similarly inviscid conditions, and thus resulting in a quasi complex-lamellar profile. In this work, we are able to ascertain the axial independence of the swirl velocity no matter the value of the outlet radius, which confirms the key assumption made in most analytical models of wall-bounded cyclonic motions. Moreover, the pressure distribution predicted numerically is found to be in fair agreement with both theoretical formulations and experimental measurements of cyclone separators. The bidirectional character of the flowfield is also corroborated by the axial and radial velocity distributions, which are found to be concurrent with theory. Then using parametric trade studies, the sensitivity of the numerical simulations to the outlet diameter of the chamber is explored to determine the influence of outlet nozzle variations on the mantle location and the number of mantles. Since none of the cases considered here promote the onset of multiple mantles, we are led to believe that more factors are involved in producing more mantles than one. Besides the exit diameter, the formation of a multiple mantle structure may be influenced by the physical boundary conditions, nozzle radius, inlet curvature, and length. In closing, we show that the latter plays a significant role in controlling the development of backflow regions inside the chamber.more » « less
-
In the present work, we model and simulate the injection and atomization of a gasoline surrogate jet by detailed numerical simulation. The surrogate fuel has a low volatility and thus no phase change occurs in the process. The nozzle geometry and operation conditions are similar to the Engine Combustion Network (ECN) “Spray G”. We focus the present study on the near field where inter-jet interaction is of secondary importance. Therefore, we have considered only one of the eight jets in the original Spray G injectors. The liquid is injected from the inlet into a chamber with stagnant gas. A tangential component of velocity is introduced at the inlet to mimic the complex internal flow in the original spray G injector, which leads to the jet deflection. A parametric study on the inlet tangential velocity is carried out to identify the proper value to be used. Simulations are performed with the multiphase flow solver, Basilisk, on an adaptive mesh. The gas-liquid interface is captured by the volume-of-fluid method. The numerical results are compared to the X-ray experimental data for the jet deflection angle and the temporal variation of penetration length. The vortex dynamics in the near field are also presented by the assistance of the vortex-identification criterion.more » « less
-
Abstract This study investigates the relationship between the azimuthally averaged kinematic structure of the tropical cyclone boundary layer (TCBL) and storm intensity, intensity change, and vortex structure above the BL. These relationships are explored using composites of airborne Doppler radar vertical profiles, which have a higher vertical resolution than typically used three-dimensional analyses and, therefore, better capture TCBL structure. Results show that the BL height, defined by the depth of the inflow layer, is greater in weak storms than in strong storms. The inflow layer outside the radius of maximum tangential wind speed (RMW) is deeper in intensifying storms than in nonintensifying storms at an early stage. The peak BL convergence inside the RMW is larger in intensifying storms than in nonintensifying storms. Updrafts originating from the TCBL are concentrated near the RMW for intensifying TCs, while updrafts span a large radial range outside the RMW for nonintensifying TCs. In terms of vortex structure above the BL, storms with a quickly decaying radial profile of tangential wind outside the RMW (“narrow” vortices) tend to have a deeper inflow layer outside the RMW, stronger inflow near the RMW, deeper and more concentrated strong updrafts close to the RMW, and weaker inflow in the outer core region than those with a slowly decaying tangential wind profile (“broad” vortices). The narrow TCs also tend to intensify faster than broad TCs, suggesting that a key relationship exists among vortex shape, the BL kinematic structure, and TC intensity change. This relationship is further explored by comparisons of absolute angular momentum budget terms for each vortex shape.more » « less
-
more » « less
SUMMARY We present a new, 3-D model of seismic velocity and anisotropy in the Pacific upper mantle, PAC13E. We invert a data set of single-station surface-wave phase-anomaly measurements sensitive only to Pacific structure for the full set of 13 anisotropic parameters that describe surface-wave anisotropy. Realistic scaling relationships for surface-wave azimuthal anisotropy are calculated from petrological information about the oceanic upper mantle and are used to help constrain the model. The strong age dependence in the oceanic velocities associated with plate cooling is also used as a priori information to constrain the model. We find strong radial anisotropy with vSH > vSV in the upper mantle; the signal peaks at depths of 100–160 km. We observe an age dependence in the depth of peak anisotropy and the thickness of the anisotropic layer, which both increase with seafloor age, but see little age dependence in the depth to the top of the radially anisotropic layer. We also find strong azimuthal anisotropy, which typically peaks in the asthenosphere. The azimuthal anisotropy at asthenospheric depths aligns better with absolute-plate-motion directions while the anisotropy within the lithosphere aligns better with palaeospreading directions. The relative strengths of radial and azimuthal anisotropy are consistent with A-type olivine fabric. Our findings are generally consistent with an explanation in which corner flow at the ridge leads to the development and freezing-in of anisotropy in the lithosphere, and shear between the lithosphere and underlying asthenosphere leads to anisotropy beneath the plate. We also observe large regions within the Pacific basin where the orientation of anisotropy and the absolute-plate-motion direction differ; this disagreement suggests the presence of shear in the asthenosphere that is not aligned with absolute-plate-motion directions. Azimuthal-anisotropy orientation rotates with depth; the depth of the maximum vertical gradient in the fast-axis orientation tends to be age dependent and agrees well with a thermally controlled lithosphere–asthenosphere boundary. We observe that azimuthal-anisotropy strength at shallow depths depends on half-spreading rate, with higher spreading rates associated with stronger anisotropy. Our model implies that corner flow is more efficient at aligning olivine to form lattice-preferred orientation anisotropy fabrics in the asthenosphere when the spreading rate at the ridge is higher.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.2514/6.2023-0136
