More Like this

1. Analyzing ion uptake in ion-exchange membranes using ion association model

   https://doi.org/10.1016/j.memsci.2023.122202  

   Oren, Yaeli S ; Nir, Oded ; Freger, Viatcheslav ( January 2024 , Journal of Membrane Science)
2. Ion-Ion Interaction Induced Nondispersive Dynamics in an Electrostatic Ion Beam Trap

   https://doi.org/10.1103/PhysRevLett.131.225001  

   Sharma, Deepak ; Heber, Oded ; Zajfman, Daniel ; Ringle, Ryan ( November 2023 , Physical Review Letters)
3. Carbon multicharged ion generation from laser-spark ion source

   https://doi.org/10.1063/1.5110402  

   Rahman, Md. Mahmudur ; Balki, Oguzhan ; Elsayed-Ali, Hani E. ( September 2019 , Review of Scientific Instruments)
4. Ion Transport in Solvent-Free, Crosslinked, Single-Ion Conducting Polymer Electrolytes for Post-Lithium Ion Batteries

   https://doi.org/10.3390/batteries4020028  

   Elmore, Clay ; Seidler, Morgan ; Ford, Hunter ; Merrill, Laura ; Upadhyay, Sunil ; Schneider, William ; Schaefer, Jennifer ( June 2018 , Batteries)
5. An open source ion gate pulser for ion mobility spectrometry

   https://doi.org/10.1007/s12127-017-0223-x  

   Garcia, Luke ; Saba, Carolyn ; Manocchio, Gabriela ; Anderson, Gordon A. ; Davis, Eric ; Clowers, Brian H. ( October 2017 , International Journal for Ion Mobility Spectrometry)

   Excluding the ion source, an ion mobility spectrometer is fundamentally comprised of drift chamber, ion gate, pulsing electronics, and a mechanism for amplifying and recording ion signals. Historically, the solutions to each of these challenges have been custom and rarely replicated exactly. For the IMS research community few detailed resources exist that explicitly detail the construction and operation of ion mobility systems. In an effort to address this knowledge gap we outline a solution to one of the key aspects of a drift tube ion mobility system, the ion gate pulser. Bradbury-Nielsen or Tyndall ion gates are found in nearly every research-grade and commercial IMS system. While conceptually simple, these gate structures often require custom, high-voltage, floating electronics. In this report we detail the operation and performance characteristics of a wifi-enabled, MOSFET-based pulser design that uses a lithium-polymer battery and does not require high voltage isolation transformers. Currently, each output of this circuit follows a TTL signal with ~20 ns rise and fall times, pulses up to +/− 200 V, and is entirely isolated using fiber optics. Detailed schematics and source code are provided to enable continued use of robust pulsing electronics that ease experimental efforts for future comparison. 

   more » « less