Inorganic perovskite solar cells (IPSCs) have gained significant attention due to their excellent thermal stability and suitable band gap (~1.7 eV) for tandem solar cell applications. However, the defect‐induced non‐radiative recombination losses, low charge extraction efficiency, energy level mismatches, and so on render the fabrication of high‐efficiency inverted IPSCs remains challenging. Here, the use of 3‐amino‐5‐bromopyridine‐2‐formamide (ABF) in methanol was dynamically spin‐coated on the surface of CsPbI2.85Br0.15film, which facilitates the limited etching of defect‐rich subsurface layer, resulting in the formation of vertical PbI2nanosheet structures. This enabled localized contacts between the perovskite film and the electron transport layer, suppress the recombination of electron‐hole and beneficial to electron extraction. Additionally, the C=O and C=N groups in ABF effectively passivated the undercoordinated Pb2+at grain boundaries and on the surface of CsPbI2.85Br0.15film. Eventually, we achieved a champion efficiency of 20.80 % (certified efficiency of 20.02 %) for inverted IPSCs with enhanced stability, which is the highest value ever reported to date. Furthermore, we successfully prepared p‐i‐n type monolithic inorganic perovskite/silicon tandem solar cells (IPSTSCs) with an efficiency of 26.26 %. This strategy provided both fast extraction and efficient passivation at the electron‐selective interface.
All‐inorganic CsPbI3quantum dots (QDs) have shown great potential in photovoltaic applications. However, their performance has been limited by defects and phase stability. Herein, an anion/cation synergy strategy to improve the structural stability of CsPbI3QDs and reduce the pivotal iodine vacancy (
- Award ID(s):
- 1719797
- NSF-PAR ID:
- 10454387
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 31
- Issue:
- 4
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract The large open‐circuit voltage deficit (
V oc,def) is the key issue that limits kesterite (Cu2ZnSn(S,Se)4, [CZTSSe]) solar cell performance. Substitution of Cu+by larger ionic Ag+((Ag,Cu)2ZnSn(S,Se)4, [ACZTSSe]) is one strategy to reduce Cu–Zn disorder and improve kesteriteV oc. However, the so far reported ACZTSSe solar cell has not demonstrated lowerV oc,defthan the world record device, indicating that some intrinsic defect properties cannot be mitigated using current approaches. Here, incorporation of Ag into kesterite through a dimethyl sulfoxide (DMSO) solution that can facilitate direct phase transformation grain growth and produce a uniform and less defective kesterite absorber is reported. The same coordination chemistry of Ag+and Cu+in the DMSO solution results in the same reaction path of ACZTSSe to CZTSSe, resulting in significant suppression of CuZndefects, its defect cluster [2CuZn + SnZn], and deep level defect CuSn. A champion device with an efficiency of 12.5% (active area efficiency 13.5% without antireflection coating) and a record lowV oc,def(64.2% Shockley–Queisser limit) is achieved from ACZTSSe with 5% Ag content. -
more » « less
Abstract Composition engineering is a particularly simple and effective approach especially using mixed cations and halide anions to optimize the morphology, crystallinity, and light absorption of perovskite films. However, there are very few reports on the use of anion substitutions to develop uniform and highly crystalline perovskite films with large grain size and reduced defects. Here, the first report of employing tetrafluoroborate (BF4−) anion substitutions to improve the properties of (FA = formamidinium, MA = methylammonium (FAPbI3)0.83(MAPbBr3)0.17) perovskite films is demonstrated. The BF4−can be successfully incorporated into a mixed‐ion perovskite crystal frame, leading to lattice relaxation and a longer photoluminescence lifetime, higher recombination resistance, and 1–2 orders magnitude lower trap density in prepared perovskite films and derived solar cells. These advantages benefit the performance of perovskite solar cells (PVSCs), resulting in an improved power conversion efficiency (PCE) of 20.16% from 17.55% due to enhanced open‐circuit voltage (
V OC) and fill factor. This is the highest PCE for BF4−anion substituted lead halide PVSCs reported to date. This work provides insight for further exploration of anion substitutions in perovskites to enhance the performance of PVSCs and other optoelectronic devices. -
more » « less
Abstract Tri‐cation (Cs+/CH3NH3+/CH(NH2)2+) and dual‐anion (Br–/I–) perovskites are promising light absorbers for inexpensive infrared (IR) photodetectors but degrade under prolonged IR exposure. Here, stable IR photodetectors based on electrospun tri‐cation perovskite fibers infiltrated with hole‐transporting π‐conjugated small molecule 2,2′,7,7′‐tetrakis[
N ,N ‐di(4‐methoxyphenyl)amino]‐9,9‐spirobifluorene (Spiro‐OMeTAD) are demonstrated. These hybrid perovskite photodetectors operate at a low bias of 5 V and exhibit ultra‐high gains with external quantum efficiencies (EQEs) as high as 3009%, decreasing slightly to ≈2770% after 3 months in air. These EQE values are almost ten times larger than those measured for photodetectors comprising bilayer perovskite/Spiro‐OMeTAD films. A high density of charge traps on electrospun fiber surfaces gives rise to a photomultiplication effect in which photogenerated holes can travel through the active layer multiple times before recombining with trapped electrons. Time‐resolved photoluminescence and conductive atomic force microscopy mapping reveal the improved performance of electrospun fibers to originate from the significantly enhanced interfacial surface area between the perovskite and Spiro‐OMeTAD compared to bilayers. As a solution‐based, scalable and continuous method of depositing perovskite layers, electrospinning thus presents a promising strategy for the inexpensive fabrication of high‐performance IR photodetectors for applications ranging from information technology to imaging. -
more » « less
Abstract All‐inorganic lead halide perovskite nanocrystals (NCs) have great optoelectronic properties with promising applications in light‐emitting diodes (LEDs), lasers, photodetectors, solar cells, and photocatalysis. However, the intrinsic toxicity of Pb and instability of the NCs impede their broad applications. Shell‐coating is an effective method for enhanced environmental stability while reducing toxicity by choosing non‐toxic shell materials such as metal oxides, polymers, silica, etc. However, multiple perovskite NCs can be encapsulated within the shell material and a uniform epitaxial‐type shell growth of well‐isolated NCs is still challenging. In this work, lead‐free vacancy‐ordered double perovskite Cs2SnX6(X = Cl, Br, and I) shells are epitaxially grown on the surface of CsPbX3NCs by a hot‐injection method. The effectiveness of the non‐toxic double perovskite shell protection is demonstrated by the enhanced environmental and phase stability against UV illumination and water. In addition, the photoluminescence quantum yields (PL QYs) increase for the CsPbCl3and CsPbBr3NCs after shelling because of the type I band alignment of the core/shell materials, while enhanced charge transport properties obtained from CsPbI3/Cs2SnI6core/shell NCs are due to the efficient charge separation in the type II core/shell band alignment.
