An official website of the United States government
Abstract Nanostructured dielectric overlayers can be used to increase light absorption in nanometer-thin films used for various optoelectronic applications. Here, the self-assembly of a close-packed monolayer of polystyrene nanospheres is used to template a core–shell polystyrene-TiO2light-concentrating monolithic structure. This is enabled by the growth of TiO2at temperatures below the polystyrene glass-transition temperature via atomic layer deposition. The result is a monolithic, tailorable nanostructured overlayer fabricated by simple chemical methods. The design of this monolith can be tailored to generate significant absorption increases in thin film light absorbers. Finite-difference, time domain simulations are used to explore the design polystyrene-TiO2core–shell monoliths that maximize light absorption in a 40 nm GaAs-on-Si substrate as a model for a photoconductive antenna THz emitter. An optimized core–shell monolith structure generated a greater than 60-fold increase of light absorption at a single wavelength in the GaAs layer of the simulated model device.
more »
« less
Complex dielectric function of thiazolothiazole thin films determined by spectroscopic ellipsometry
In this paper, the complex dielectric function of 2,5-bis(N,N-dibutyl-4-aminophenyl) thiazolo[5,4-d]thiazole is reported. Thin films of this material were obtained by spin coating on a silicon substrate. The samples were investigated using spectroscopic ellipsometry in the spectral range from 354 nm to 1907 nm at multiple angles of incidence. The ellipsometric data were analyzed using a stratified-layer model composed of a thiazolothiazole thin film, a native SiO2oxide, and a Si substrate. The model dielectric function of the thiazolothiazole thin film was modeled using a series of Tauc-Lorentz and Gaussian oscillators. The best-model calculated data reproduces the experimental data very well. The bandgap of TTz is reported and found to be in good agreement with density functional theory calculations reported earlier.
more »
« less
- PAR ID:
- 10412158
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optical Materials Express
- Volume:
- 13
- Issue:
- 6
- ISSN:
- 2159-3930
- Format(s):
- Medium: X Size: Article No. 1589
- Size(s):
- Article No. 1589
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract X-ray photoelectron spectroscopy (XPS) shows that dramatic changes in the core level binding energies can provide strong indications of transitions between more dielectric and more metallic CoFe2O4and NiCo2O4thin films. These significant variations in the XPS core level binding energies are possible with a combination of annealing and oxygen exposure; however, the behaviors of the CoFe2O4and NiCo2O4thin films are very different. The XPS Co and Fe 2p3/2core levels for the CoFe2O4thin film at room temperature show large photovoltaic surface charging, leading to binding energy shifts, characteristic of a highly dielectric (or insulating) surface at room temperature. The photovoltaic charging, observed in the XPS binding energies of the Co and Fe 2p3/2core levels, decreases with increasing temperature. The XPS core level binding energies of CoFe2O4thin film saturated at lower apparent binding energies above 455 K. This result shows that the prepared CoFe2O4thin film can be dielectric at room temperature but become more metallic at elevated temperatures. The dielectric nature of the CoFe2O4thin film was restored only when the film was annealed in sufficient oxygen, indicating that oxygen vacancies play an important role in the transition of the film from dielectric (or insulating) to metallic. In contrast, the XPS studies of initially metallic NiCo2O4thin film demonstrated that annealing NiCo2O4thin film led to a more dielectric or insulating film. The original more metallic character of the NiCo2O4film was restored when the NiCo2O4was annealed in sufficient oxygen. Effective activation energies are estimated for the carriers from a modified Arrhenius-type model applied to the core level binding energy changes of the CoFe2O4and NiCo2O4thin films, as a function of temperature. The origin of the carriers, however, is not uniquely identified. This work illustrates routes to regulate the surface metal-to-insulator transition of dielectric oxides, especially in the case of insulating NiCo2O4thin film that can undergo reversible metal-to-insulator transition with temperature.more » « less
-
Abstract Perovskites have emerged as a forerunner of electronics research due to their vast potential for optoelectronic applications. The numerous combinations of constituent ions and the potential for doping of perovskites lead to a high demand to track the underlying electronic properties. Solution‐based electrochemistry is particularly promising for detailed and facile assessment of perovskites. Here, electrochemical impedance spectroscopy (EIS) of methylammonium lead iodide (MAPbI3) thin films is performed and model them with an equivalent circuit that accounts for solvent, ionic, and thin film effects. A dielectric constant consistent with prior AC studies and a diffusion constant harmonious with cation motion in MAPbI3are extracted. An electrical double layer thickness in the perovskite film of 54 nm is obtained, consistent with lithium doping in perovskite films. Comparing the EIS and equivalent circuit model of perovskite films to control ITO‐only data enabled the assignment of the ions at each interface. This comparison implied a double layer of primarily lithium ions inside the perovskite film at the solution interface with significant recombination of ions on the solution side of the interface. This demonstrates EIS as a powerful tool for studying the fundamental charge accumulation and transport processes in perovskite thin films.more » « less
-
Abstract Thermoelectric generators are an environmentally friendly and reliable solid‐state energy conversion technology. Flexible and low‐cost thermoelectric generators are especially suited to power flexible electronics and sensors using body heat or other ambient heat sources. Bismuth telluride (Bi2Te3) based thermoelectric materials exhibit their best performance near room temperature making them an ideal candidate to power wearable electronics and sensors using body heat. In this report, Bi2Te3thin films are deposited on a flexible polyimide substrate using low‐cost and scalable manufacturing methods. The synthesized Bi2Te3nanocrystals have a thickness of 35 ± 15 nm and a lateral dimension of 692 ± 186 nm. Thin films fabricated from these nanocrystals exhibit a peak power factor of 0.35 mW m−1·K−2at 433 K, which is among the highest reported values for flexible thermoelectric films. In order to evaluate the flexibility of the thin films, static and dynamic bending tests are performed while monitoring the change in electrical resistivity. After 1000 bending cycles over a 50 mm radius of curvature, the change in electrical resistance of the film is 23%. Using Bi2Te3solutions, the ability to print thermoelectric thin films with an aerosol jet printer is demonstrated, highlighting the potential of additive manufacturing techniques for fabricating flexible thermoelectric generators.more » « less
-
Abstract This study reports a pulsed laser deposition-assisted synthesis of highly metallic titanium nitride (TiN) and a series of semiconducting titanium oxynitride (TiNxOy) compounds in thin film form with tunable plasmonic properties by carefully altering the nitrogen (N)-oxygen (O) ratio. The N/O ratio was controlled from 0.3 (highest oxygen doping of TiN) to ~ 1.0 (no oxygen doping of TiN) by growing the TiN films under nitrogen pressures of 50, 35, and 10 mTorr and high vacuum conditions of 2 × 10−6 Torr with no external gas introduced. The presence of nitrogen in the deposition chamber during the film growth affects the gas phase oxidation of TiN to TiNxOyby increasing the mean free path-dependent N and O inter-collisions per second by two to three orders of magnitudes. The evidence of increased oxidation of TiN to TiNxOywith an increase in nitrogen deposition pressure was obtained using X-ray photoelectron spectroscopy analysis. While the TiN samples deposited in high vacuum conditions had the highest reflectance, TiNxOythin films were also found to possess high reflectance at low frequency with a well-defined edge around 20,000 cm−1. Furthermore, the vacuum-deposited TiN samples showed a large negative dielectric constant of -330 and the largest frequency of zero-crossing at 25,000 cm−1; the TiNxOysamples deposited in the presence of nitrogen ambient also showed promising plasmonic applications at the near-mid infrared range. A comparison of the dielectric constant and loss function data of this research with the literature values for noble metals seems to indicate that TiN and TiNxOyhave the potential to replace gold and silver in the visible and near-infrared spectral regions.more » « less
