Combined synchrotron X‐ray nanotomography imaging, cryogenic electron microscopy (cryo‐EM) and modeling elucidate how potassium (K) metal‐support energetics influence electrodeposit microstructure. Three model supports are employed: O‐functionalized carbon cloth (potassiophilic, fully‐wetted), non‐functionalized cloth and Cu foil (potassiophobic, nonwetted). Nanotomography and focused ion beam (cryo‐FIB) cross‐sections yield complementary three‐dimensional (3D) maps of cycled electrodeposits. Electrodeposit on potassiophobic support is a triphasic sponge, with fibrous dendrites covered by solid electrolyte interphase (SEI) and interspersed with nanopores (sub‐10 nm to 100 nm scale). Lage cracks and voids are also a key feature. On potassiophilic support, the deposit is dense and pore‐free, with uniform surface and SEI morphology. Mesoscale modeling captures the critical role of substrate‐metal interaction on K metal film nucleation and growth, as well as the associated stress state.
Combined synchrotron X‐ray nanotomography imaging, cryogenic electron microscopy (cryo‐EM) and modeling elucidate how potassium (K) metal‐support energetics influence electrodeposit microstructure. Three model supports are employed: O‐functionalized carbon cloth (potassiophilic, fully‐wetted), non‐functionalized cloth and Cu foil (potassiophobic, nonwetted). Nanotomography and focused ion beam (cryo‐FIB) cross‐sections yield complementary three‐dimensional (3D) maps of cycled electrodeposits. Electrodeposit on potassiophobic support is a triphasic sponge, with fibrous dendrites covered by solid electrolyte interphase (SEI) and interspersed with nanopores (sub‐10 nm to 100 nm scale). Lage cracks and voids are also a key feature. On potassiophilic support, the deposit is dense and pore‐free, with uniform surface and SEI morphology. Mesoscale modeling captures the critical role of substrate‐metal interaction on K metal film nucleation and growth, as well as the associated stress state.
more » « less- NSF-PAR ID:
- 10415859
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie
- Volume:
- 135
- Issue:
- 23
- ISSN:
- 0044-8249
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Anodes for lithium metal batteries, sodium metal batteries, and potassium metal batteries are susceptible to failure due to dendrite growth. This review details the structure–chemistry–performance relations in membranes that stabilize the anodes’ solid electrolyte interphase (SEI), allowing for stable electrochemical plating/stripping. Case studies involving Li, Na, and K are presented to illustrate key concepts. “Classical” versus “modern” understandings of the SEI are described, with an emphasis on the new structural insights obtained through novel analytical techniques, including in situ liquid‐secondary ion mass spectroscopy, titration gas chromatography, and tip‐enhanced Raman spectroscopy. This Review highlights diverse approaches for increasing SEI stability, either by inserting a secondary layer between the native SEI and the separator, or by combining the membrane with a native SEI to form a hybrid composite. Exciting and nonintuitive findings are discussed, such as that the metal anode roughness profoundly affects the SEI structure and stability, or that organic artificial SEI‐layers may be more effective than the native inorganic–organic SEIs. Emerging multifunctional architectures are presented, which serve a dual role as metal hosts and metal surface protection layers. Throughout the Review, fruitful future research directions and the critical areas where there is incomplete understanding are discussed.
-
more » « less
Metal‐free electrocatalysts have been extensively developed to replace noble metal Pt and RuO2catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in fuel cells or metal–air batteries. These electrocatalysts are usually deposited on a 3D conductive support (e.g., carbon paper or carbon cloth (CC)) to facilitate mass and electron transport. For practical applications, it is desirable to create in situ catalysts on the carbon fiber support to simplify the fabrication process for catalytic electrodes. In this study, the first example of in situ exfoliated, edge‐rich, oxygen‐functionalized graphene on the surface of carbon fibers using Ar plasma treatment is successfully prepared. Compared to pristine CC, the plasma‐etched carbon cloth (P‐CC) has a higher specific surface area and an increased number of active sites for OER and ORR. P‐CC also displays good intrinsic electron conductivity and excellent mass transport. Theoretical studies show that P‐CC has a low overpotential that is comparable to Pt‐based catalysts, as a result of both defects and oxygen doping. This study provides a simple and effective approach for producing highly active in situ catalysts on a carbon support for OER and ORR.
-
more » « less
Abstract The solid electrolyte interphase (SEI) forms on electrode surfaces from decomposition of the electrolyte. However, there is almost no atomistic detail of SEI formation on Li metal anode, a major obstacle in understanding the highly complex battery electrochemistry sufficiently to design high performance batteries. Herein, a realistic atomistic model (39 000 atoms) for the SEI formation at the interface between the Li metal anode and ionic liquid electrolyte using reactive molecular dynamics simulations is provided. A ≈10 nm thick SEI composed of a dense ordered inorganic layer near the Li‐metal anode and a porous organic layer near the electrolyte is found. These results provide new insights into a deeper understanding of the complex SEI that should be useful in developing a new generation of highly efficient batteries.
-
more » « less
The physiochemical nature of reactive metal electrodeposits during the early stages of electrodeposition is rarely studied but known to play an important role in determining the electrochemical stability and reversibility of electrochemical cells that utilize reactive metals as anodes. We investigated the early-stage growth dynamics and reversibility of electrodeposited lithium in liquid electrolytes infused with brominated additives. On the basis of equilibrium theories, we hypothesize that by regulating the surface energetics and surface ion/adatom transport characteristics of the interphases formed on Li, Br-rich electrolytes alter the morphology of early-stage Li electrodeposits; enabling late-stage control of growth and high electrode reversibility. A combination of scanning electron microscopy (SEM), image analysis, X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), and contact angle goniometry are employed to evaluate this hypothesis by examining the physical–chemical features of the material phases formed on Li. We report that it is possible to achieve fine control of the early-stage Li electrodeposit morphology through tuning of surface energetic and ion diffusion properties of interphases formed on Li. This control is shown further to translate to better control of Li electrodeposit morphology and high electrochemical reversibility during deep cycling of the Li metal anode. Our results show that understanding and eliminating morphological and chemical instabilities in the initial stages of Li electroplating via deliberately modifying energetics of the solid electrolyte interphase (SEI) is a feasible approach in realization of deeply cyclable reactive metal batteries.
