skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Scanning x-ray excited optical luminescence of heterogeneity in halide perovskite alloys
Abstract Understanding the optoelectronic properties of optically active materials at the nanoscale often proves challenging due to the diffraction-limited resolution of visible light probes and the dose sensitivity of many optically active materials to high-energy electron probes. In this study, we demonstrate correlative synchrotron-based scanning x-ray excited optical luminescence (XEOL) and x-ray fluorescence (XRF) to simultaneously probe local composition and optoelectronic properties of halide perovskite thin films of interest for photovoltaic and optoelectronic devices. We find that perovskite XEOL stability, emission redshifting, and peak broadening under hard x-ray irradiation correlates with trends seen in photoluminescence measurements under continuous visible light laser irradiation. The XEOL stability is sufficient under the intense x-ray probe irradiation to permit proof-of-concept correlative mapping. Typical synchrotron XRF and nano-diffraction measurements use acquisition times 10–100 x shorter than the 5-second acquisition employed for XEOL scans in this study, suggesting that improving luminescence detection should allow correlative XEOL measurements to be performed successfully with minimal material degradation. Analysis of the XEOL emission from the quartz substrate beneath the perovskite reveals its promise for use as a real-time in-situ x-ray dosimeter, which could provide quantitative metrics for future optimization of XEOL data collection for perovskites and other beam-sensitive materials. Overall, the data suggest that XEOL represents a promising route towards improved resolution in the characterization of nanoscale heterogeneities and defects in optically active materials that may be implemented into x-ray nanoprobes to complement existing x-ray modalities.  more » « less
Award ID(s):
1848371
PAR ID:
10417241
Author(s) / Creator(s):
; ; ; ; ; ; ;
Date Published:
Journal Name:
Journal of Physics D: Applied Physics
Volume:
56
Issue:
3
ISSN:
0022-3727
Page Range / eLocation ID:
034002
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Correlative X‐ray microscopy, including synchrotron X‐ray diffraction and fluorescence, is leveraged to understand the local role of europium as a B‐site additive in CsPbBr3perovskite crystals. Europium addition reduces microstrain in the perovskite, despite the fact that the degree of europium incorporation into the perovskite varies locally, with a maximum loading over twice the nominal stoichiometry. The presence of europium improves photoluminescence yield and bandwidth, while shifting the emission to bluer wavelengths. Finally, europium‐containing crystals have greatly improved X‐ray hardness. The findings show promise for europium as an additive in perovskite optoelectronic devices. 
    more » « less
  2. ; ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Compared to halides Cs2HfX6(X = Cl, Br, I) with a vacancy‐ordered cubic double perovskite structure, the halide Cs2HfF6(CHF), with a hexagonal Bravais lattice, possesses a higher mass density and chemical stability for radiation detection. Luminescence properties and energy transfer mechanisms of rare‐earths‐doped CHF materials are studied here. The structure of CHF is identified as a new type of vacancy‐ordered hexagonal perovskite, with the same type of building blocks of the double perovskite but stacked with single layers. Density‐functional theory calculations reveal a large bandgap of CHF. A broad emission is observed from the pristine CHF host, which is suggested to be associated with self‐trapped excitons (STEs). A series of rare‐earths‐doped materials are designed utilizing the STE emissions, and efficient energy transfers from STEs and Tb3+to Eu3+are achieved for tunable emissions. The codoped material shows stable emission under X‐ray irradiation, with 10.2% reduction from its initial emission intensity, associated with possible structural evolution by radiation‐induced deformation of the soft host. The radiation responses of singly and codoped materials are evaluated, and the codoped material is found to be more sensitive to the radiation energy than the singly doped or pristine CHF for radiation detection. 
    more » « less
  3. ; ; ; ; (, Journal of Polymer Science)
    Abstract As a class of semiconductor nanocrystals that exhibit high photoluminescence quantum yield (PLQY) at tunable wavelengths, perovskite nanocrystals (PNCs) are attractive candidates for optoelectronic and light‐emitting devices. However, attempts to optimize PNC integration into such applications suffer from PNC instability and loss of PL over time. Here, we describe the impact of organic and polymeric N‐oxides when used in conjunction with PNCs, whereby a significant increase in PNC quantum yield is observed in solution, and stable PL emission is obtained in polymeric nanocomposites. Specifically, when using aliphatic N‐oxides in ligand exchange with CsPbBr3PNCs in solution, a substantial boost in PNC brightness is observed (~40% or more PLQY increase), followed by an alteration of the perovskite chemistry. When N‐oxide substituents are positioned pendent to a poly(n‐butyl methacrylate) backbone, the optically clear flexible nanocomposite films obtained have bright PL emission and maintain optical clarity for months. X‐ray diffraction is useful for characterizing the PNC crystalline structure following exposure to aliphatic N‐oxides, while electron microscopy (EM) and small‐angle X‐ray scattering (SAXS) measurements of the PNC‐polymer nanocomposites show this polymeric N‐oxide platform to cleanly disperse PNCs in flexible polymer films. 
    more » « less
  4. ; ; ; (, MRS Bulletin)
    Metal-halide perovskites, in particular their nanocrystal forms, have emerged as a new generation of light-emitting materials with exceptional optical properties, including narrow emissions covering the whole visible region with high photoluminescence quantum efficiencies of up to near-unity. Remarkable progress has been achieved over the last few years in the areas of materials development and device integration. A variety of synthetic approaches have been established to precisely control the compositions and microstructures of metal-halide perovskite nanocrystals (NCs) with tunable bandgaps and emission colors. The use of metal-halide perovskite NCs as active materials for optoelectronic devices has been extensively explored. Here, we provide a brief overview of recent advances in the development and application of metal-halide perovskite NCs. From color tuning via ion exchange and manipulation of quantum size effects, to stability enhancement via surface passivation, new chemistry for materials development is discussed. In addition, processes in optoelectronic devices based on metal-halide perovskite NCs, in particular, light-emitting diodes and radiation detectors, will be introduced. Opportunities for future research in metal-halide perovskite NCs are provided as well. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Physics and Chemistry of Minerals)
    Abstract Access to synchrotron X-ray facilities has become an important aspect for many disciplines in experimental Earth science. This is especially important for studies that rely on probing samples in situ under natural conditions different from the ones found at the surface of the Earth. The non-ambient condition Earth science program at the Advanced Light Source (ALS), Lawrence Berkeley National Laboratory, offers a variety of tools utilizing the infra-red and hard X-ray spectrum that allow Earth scientists to probe Earth and environmental materials at variable conditions of pressure, stress, temperature, atmospheric composition, and humidity. These facilities are important tools for the user community in that they offer not only considerable capacity (non-ambient condition diffraction) but also complementary (IR spectroscopy, microtomography), and in some cases unique (Laue microdiffraction) instruments. The availability of the ALS’ in situ probes to the Earth science community grows especially critical during the ongoing dark time of the Advanced Photon Source in Chicago, which massively reduces available in situ synchrotron user time in North America. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email