Modulation-based control and locking of lasers, filters and other photonic components is a ubiquitous function across many applications that span the visible to infrared (IR), including atomic, molecular and optical (AMO), quantum sciences, fiber communications, metrology, and microwave photonics. Today, modulators used to realize these control functions consist of high-power bulk-optic components for tuning, sideband modulation, and phase and frequency shifting, while providing low optical insertion loss and operation from DC to 10s of MHz. In order to reduce the size, weight and cost of these applications and improve their scalability and reliability, modulation control functions need to be implemented in a low loss, wafer-scale CMOS-compatible photonic integration platform. The silicon nitride integration platform has been successful at realizing extremely low waveguide losses across the visible to infrared and components including high performance lasers, filters, resonators, stabilization cavities, and optical frequency combs. Yet, progress towards implementing low loss, low power modulators in the silicon nitride platform, while maintaining wafer-scale process compatibility has been limited. Here we report a significant advance in integration of a piezo-electric (PZT, lead zirconate titanate) actuated micro-ring modulation in a fully-planar, wafer-scale silicon nitride platform, that maintains low optical loss (0.03 dB/cm in a 625 µm resonator) at 1550 nm, with an order of magnitude increase in bandwidth (DC - 15 MHz 3-dB and DC - 25 MHz 6-dB) and order of magnitude lower power consumption of 20 nW improvement over prior PZT modulators. The modulator provides a >14 dB extinction ratio (ER) and 7.1 million quality-factor (Q) over the entire 4 GHz tuning range, a tuning efficiency of 162 MHz/V, and delivers the linearity required for control applications with 65.1 dB·Hz2/3and 73.8 dB·Hz2/3third-order intermodulation distortion (IMD3) spurious free dynamic range (SFDR) at 1 MHz and 10 MHz respectively. We demonstrate two control applications, laser stabilization in a Pound-Drever Hall (PDH) lock loop, reducing laser frequency noise by 40 dB, and as a laser carrier tracking filter. This PZT modulator design can be extended to the visible in the ultra-low loss silicon nitride platform with minor waveguide design changes. This integration of PZT modulation in the ultra-low loss silicon nitride waveguide platform enables modulator control functions in a wide range of visible to IR applications such as atomic and molecular transition locking for cooling, trapping and probing, controllable optical frequency combs, low-power external cavity tunable lasers, quantum computers, sensors and communications, atomic clocks, and tunable ultra-low linewidth lasers and ultra-low phase noise microwave synthesizers.
Circular microdisk mechanical resonators vibrating in their various resonance modes have emerged as important platforms for a wide spectrum of technologies including photonics, cavity optomechanics, optical metrology, and quantum optics. Optically transduced microdisk resonators made of advanced materials such as silicon carbide (SiC), diamond, and other wide- or ultrawide-bandgap materials are especially attractive. They are also of strong interest in the exploration of transducers or detectors for harsh environments and mission-oriented applications. Here we report on the first experimental investigation and analysis of energetic proton radiation effects on microdisk resonators made of 3C-SiC thin film grown on silicon substrate. We fabricate and study microdisks with diameters of ∼48 µm and ∼36 µm, and with multimode resonances in the ∼1 to 20 MHz range. We observe consistent downshifts of multimode resonance frequencies, and measure fractional frequency downshifts from the first three flexural resonance modes, up to ∼-3420 and -1660 ppm for two devices, respectively, in response to 1.8 MeV proton radiation at a dosage of 1014/cm2. Such frequency changes are attributed to the radiation-induced Young’s modulus change of ∼0.38% and ∼0.09%, respectively. These devices also exhibit proton detection responsivity of ℜ ≈ -5 to -6 × 10−6 Hz/proton. The results provide new knowledge of proton radiation effects in SiC materials, and may lead to better understanding and exploitation of micro/nanoscale devices for harsh-environment sensing, optomechanics, and integrated photonics applications.
more » « less- NSF-PAR ID:
- 10417564
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optical Materials Express
- Volume:
- 13
- Issue:
- 6
- ISSN:
- 2159-3930
- Page Range / eLocation ID:
- Article No. 1797
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Abstract We explore the prospects and benefits of combining the techniques of cavity optomechanics with efforts to image spins using magnetic resonance force microscopy (MRFM). In particular, we focus on a common mechanical resonator used in cavity optomechanics—high-stress stoichiometric silicon nitride (Si3N4) membranes. We present experimental work with a ‘trampoline’ membrane resonator that has a quality factor above 106and an order of magnitude lower mass than a comparable standard membrane resonators. Such high-stress resonators are on a trajectory to reach 0.1
-
more » « less
Silicon carbide (SiC) is rapidly emerging as a leading platform for the implementation of nonlinear and quantum photonics. Here, we find that commercial SiC, which hosts a variety of spin qubits, possesses low optical absorption that can enable SiC integrated photonics with quality factors exceeding
. We fabricate multimode microring resonators with quality factors as high as 1.1 million, and observe low-threshold ( ) optical parametric oscillation using the fundamental mode as well as optical microcombs spanning 200 nm using a higher-order mode. Our demonstration is an essential milestone in the development of photonic devices that harness the unique optical properties of SiC, paving the way toward the monolithic integration of nonlinear photonics with spin-based quantum technologies. -
more » « less
Abstract The progress in integration of nanodiamond with photonic devices is analyzed in the light of quantum optical applications. Nanodiamonds host a variety of optically active defects, called color centers, which provide rich ground for photonic engineering. Theoretical introduction describing light and matter interaction between optical modes and a quantum emitter is presented, including the role of the Debye–Waller factor typical of color center emission. The synthesis of diamond nanoparticles is discussed in an overview of methods leading to experimentally realized hybrid platforms of nanodiamond with gallium phosphide, silicon dioxide, and silicon carbide. The trade‐offs in the substrate index of refraction values are reviewed in the context of the achieved strength of light and matter interaction. Thereby, the recent results on the growth of color center‐rich nanodiamond on prefabricated silicon carbide microdisk resonators are presented. These hybrid devices achieve up to fivefold enhancement of the diamond color‐center light emission and can be employed in integrated quantum photonics.
-
more » « less
Lithium niobate (LN), possessing wide transparent window, strong electro-optic effect, and large optical nonlinearity, is an ideal material platform for integrated photonics application. Microring resonators are particularly suitable as integrated photonic components, given their flexibility of device engineering and their potential for large-scale integration. However, the susceptibility to temperature fluctuation has become a major challenge for their implementation in a practical environment. Here, we demonstrate an athermal LN microring resonator. By cladding an x-cut LN microring resonator with a thin layer of titanium oxide, we are able to completely eliminate the first-order thermo-optic coefficient (TOC) of cavity resonance right at room temperature (20°C), leaving only a small residual quadratic temperature dependence with a second-order TOC of only 0.37 pm/K2. It corresponds to a temperature-induced resonance wavelength shift within 0.33 nm over a large operating temperature range of (−10 – 50)°C that is one order of magnitude smaller than a bare LN microring resonator. Moreover, the TiO2-cladded LN microring resonator is able to preserve high optical quality, with an intrinsic optical Q of 5.8 × 105that is only about 11% smaller than that of a bare LN resonator. The flexibility of thermo-optic engineering, high optical quality, and device fabrication compatibility show great promise of athermal LN/TiO2hybrid devices for practical applications, elevating the potential importance of LN photonic integrated circuits for future communication, sensing, nonlinear and quantum photonics.
