skip to main content

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, February 13 until 2:00 AM ET on Friday, February 14 due to maintenance. We apologize for the inconvenience.


Title: Dynamically Tunable Optical Cavities with Embedded Nematic Liquid Crystalline Networks
Abstract

Tunable metal–insulator–metal (MIM) Fabry–Pérot (FP) cavities that can dynamically control light enable novel sensing, imaging and display applications. However, the realization of dynamic cavities incorporating stimuli‐responsive materials poses a significant engineering challenge. Current approaches rely on refractive index modulation and suffer from low dynamic tunability, high losses, and limited spectral ranges, and require liquid and hazardous materials for operation. To overcome these challenges, a new tuning mechanism employing reversible mechanical adaptations of a polymer network is proposed, and dynamic tuning of optical resonances is demonstrated. Solid‐state temperature‐responsive optical coatings are developed by preparing a monodomain nematic liquid crystalline network (LCN) and are incorporated between metallic mirrors to form active optical microcavities. LCN microcavities offer large, reversible and highly linear spectral tuning of FP resonances reaching wavelength‐shifts up to 40 nm via thermomechanical actuation while featuring outstanding repeatability and precision over more than 100 heating–cooling cycles. This degree of tunability allows for reversible switching between the reflective and the absorbing states of the device over the entire visible and near‐infrared spectral regions, reaching large changes in reflectance with modulation efficiency ΔR = 79%.

 
more » « less
PAR ID:
10418816
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials
Volume:
35
Issue:
13
ISSN:
0935-9648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    Responsive chromic materials are highly desirable in the fields of displays, anti-counterfeiting, and camouflage, but their advanced applications are usually limited by the unrealized delicate and independent tunability of their three intrinsic attributes of color. This work achieves the separate, continuous, and reversible modulation of structural color brightness and hue with an aqueous suspension of dual-responsive Fe 3 O 4 @polyvinylpyrrolidone (PVP)@poly( N -isopropyl acrylamide) (PNIPAM) flexible photonic nanochains. The underlying modulation mechanism of color brightness was experimentally and numerically deciphered by analyzing the morphological responses to stimuli. When an increasing magnetic field was applied, the random worm-like flexible photonic nanochains gradually orientated along the field direction, due to the dominant magnetic dipole interaction over the thermal motion, lengthening the orientation segment length up to the whole of the nanochains. Consequently, the suspension displays increased color brightness (characterized by diffraction intensity). Meanwhile, the color hue (characterized by diffraction frequency) could be controlled by temperature, due to the volume changes of the interparticle PNIPAM. The achieved diverse color modulation advances the next-generation responsive chromic materials and enriches the basic understanding of the color tuning mechanisms. With versatile and facile color tunability and shape patterning, the developed responsive chromic liquid promises to have attractive potential in full-color displays and in adaptive camouflages. 
    more » « less
  2. Abstract

    Phase-change materials (PCMs) offer a compelling platform for active metaoptics, owing to their large index contrast and fast yet stable phase transition attributes. Despite recent advances in phase-change metasurfaces, a fully integrable solution that combines pronounced tuning measures, i.e., efficiency, dynamic range, speed, and power consumption, is still elusive. Here, we demonstrate an in situ electrically driven tunable metasurface by harnessing the full potential of a PCM alloy, Ge2Sb2Te5(GST), to realize non-volatile, reversible, multilevel, fast, and remarkable optical modulation in the near-infrared spectral range. Such a reprogrammable platform presents a record eleven-fold change in the reflectance (absolute reflectance contrast reaching 80%), unprecedented quasi-continuous spectral tuning over 250 nm, and switching speed that can potentially reach a few kHz. Our scalable heterostructure architecture capitalizes on the integration of a robust resistive microheater decoupled from an optically smart metasurface enabling good modal overlap with an ultrathin layer of the largest index contrast PCM to sustain high scattering efficiency even after several reversible phase transitions. We further experimentally demonstrate an electrically reconfigurable phase-change gradient metasurface capable of steering an incident light beam into different diffraction orders. This work represents a critical advance towards the development of fully integrable dynamic metasurfaces and their potential for beamforming applications.

     
    more » « less
  3. Abstract

    We demonstrate an electrically-driven metal-dielectric photonic crystal emitter by fabricating a series of organic light emitting diode microcavities in a vertical stack. The states of the individual microcavities are shown to split into bands of hybridized photonic energy states through interaction with adjacent cavities. The propagating photonic modes within the crystal depend sensitively on the unit cell geometry and the optical properties of the component materials. By systematically varying the metallic layer thicknesses, we show control over the density of states and band center. The emergence of a tunable photonic band gap due to an asymmetry-introduced Peierls distortion is demonstrated and correlated to the unit cell configuration. This work develops a class of one dimensional, planar, photonic crystal emitter architectures enabling either narrow linewidth, multi-mode, or broadband emission with a high degree of tunability.

     
    more » « less
  4. Abstract

    New fluorochromic materials that reversibly change their emission properties in response to their environment are of interest for the development of sensors and light‐emitting materials. A new design of Eu‐containing polymer hydrogels showing fast self‐healing and tunable fluorochromic properties in response to five different stimuli, including pH, temperature, metal ions, sonication, and force, is reported. The polymer hydrogels are fabricated using Eu–iminodiacetate (IDA) coordination in a hydrophilic poly(N,N‐dimethylacrylamide) matrix. Dynamic metal–ligand coordination allows reversible formation and disruption of hydrogel networks under various stimuli which makes hydrogels self‐healable and injectable. Such hydrogels show interesting switchable ON/OFF luminescence along with the sol–gel transition through the reversible formation and dissociation of Eu–IDA complexes upon various stimuli. It is demonstrated that Eu‐containing hydrogels display fast and reversible mechanochromic response as well in hydrogels having interpenetrating polymer network. Those multistimuli responsive fluorochromic hydrogels illustrate a new pathway to make smart optical materials, particularly for biological sensors where multistimuli response is required.

     
    more » « less
  5. The fixed post-manufacturing properties of metal-based photonic devices impose limitations on their adoption in dynamic photonics. Modulation approaches currently available (e.g. mechanical stressing or electrical biasing) tend to render the process cumbersome or energy-inefficient. Here we demonstrate the promise of utilizing magnesium (Mg) in achieving optical tuning in a simple and controllable manner: etching in water. We revealed an evident etch rate modulation with the control of temperature and structural dimensionality. Further, our numerical calculations demonstrate the substantial tuning range of optical resonances spanning the entire visible frequency range with the etching-induced size reduction of several archetypal plasmonic nanostructures. Our work will help to guide the rational design and fabrication of bio-degradable photonic devices with easily tunable optical responses and minimal power footprint.

     
    more » « less