An official website of the United States government
Understanding the nucleation and growth mechanisms of highentropy alloy (HEA) nanoparticles is crucial for developing functional nanocrystals with tailored properties. This study investigates the thermal decomposition of mixed metal salt precursors (Fe, Ni, Pt, Ir, Ru) on reduced graphene oxide (rGO) using in situ transmission electron microscopy (TEM) when heated to 1000 °C at both slow (20 °C min−1) and fast (103 °C s−1) heating/cooling rates. Slow heating to 1000 °C revealed the following: (1) The nanoparticles' nucleation occurred through multistage decomposition at lower temperatures (250−300 °C) than single metal salt precursors (300−450 °C). (2) Pt-dominant nanocrystals autocatalytically reduced other elements, leading to the formation of multimetallic FeNiPtIrRu nanoparticles. (3) At 1000 °C, the nanoparticles were single-phase with noble metals enriched compared to transition metals. (4) Slow cooling induced structural heterogeneity and phase segregation due to element diffusion and thermodynamic miscibility. (5) Adding polyvinylpyrrolidone (PVP) suppressed segregation, promoting HEA nanoparticle formation even during slow cooling by limiting atomic diffusion. Under fast heating/cooling, nanoparticles formed as a solid solution of fcc HEA, indicating kinetic control and limited atomic diffusion. The density function theory (DFT) calculations illustrate that the simultaneous presence of metal elements on rGO, as expected by the fast heating process, favors the formation of an fcc HEA structure, with strong interactions between HEA nanoparticles and rGO enhancing stability. This study provides insights into how heating rates and additives like PVP can control phase composition, chemical homogeneity, and stability, enabling the rational design of complex nanomaterials for catalytic, energy, and functional applications.
more »
« less
In Situ Thermolysis of a Ni Salt on Amorphous Carbon and Graphene Oxide Substrates
Abstract Understanding the thermal decomposition of metal salt precursors on carbon structures is essential for the controlled synthesis of metal‐decorated carbon nanomaterials. Here, the thermolysis of a Ni precursor salt, NiCl2·6H2O, on amorphous carbon (a‐C) and graphene oxide (GO) substrates is explored using in situ transmission electron microscopy. Thermal decomposition of NiCl2·6H2O on GO occurs at higher temperatures and slower kinetics than on a‐C substrate. This is correlated to a higher activation barrier for Cl2removal calculated by the density functional theory, strong Ni‐GO interaction, high‐density oxygen functional groups, defects, and weak van der Waals using GO substrate. The thermolysis of NiCl2·6H2O proceeds via multistep decomposition stages into the formation of Ni nanoparticles with significant differences in their size and distribution depending on the substrate. Using GO substrates leads to nanoparticles with 500% smaller average sizes and higher thermal stability than a‐C substrate. Ni nanoparticles showcase thefcccrystal structure, and no size effect on the stability of the crystal structure is observed. These findings demonstrate the significant role of carbon substrate on nanoparticle formation and growth during the thermolysis of carbon–metal heterostructures. This opens new venues to engineer stable, supported catalysts and new carbon‐based sensors and filtering devices.
more »
« less
- PAR ID:
- 10419223
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 33
- Issue:
- 28
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Engineering the crystal structure of Pt–M (M = transition metal) nanoalloys to chemically ordered ones has drawn increasing attention in oxygen reduction reaction (ORR) electrocatalysis due to their high resistance against M etching in acid. Although Pt–Ni alloy nanoparticles (NPs) have demonstrated respectable initial ORR activity in acid, their stability remains a big challenge due to the fast etching of Ni. In this work, sub‐6 nm monodisperse chemically orderedL10‐Pt–Ni–Co NPs are synthesized for the first time by employing a bifunctional core/shell Pt/NiCoOxprecursor, which could provide abundant O‐vacancies for facilitated Pt/Ni/Co atom diffusion and prevent NP sintering during thermal annealing. Further, Co doping is found to remarkably enhance the ferromagnetism (room temperature coercivity reaching 2.1 kOe) and the consequent chemical ordering ofL10‐Pt–Ni NPs. As a result, the best‐performing carbon supportedL10‐PtNi0.8Co0.2catalyst reveals a half‐wave potential (E1/2) of 0.951 V versus reversible hydrogen electrode in 0.1mHClO4with 23‐times enhancement in mass activity over the commercial Pt/C catalyst along with much improved stability. Density functional theory (DFT) calculations suggest that theL10‐PtNi0.8Co0.2core could tune the surface strain of the Pt shell toward optimized Pt–O binding energy and facilitated reaction rate, thereby improving the ORR electrocatalysis.more » « less
-
For the first time, a fast heating–cooling process is reported for the synthesis of carbon‐coated nickel (Ni) nanoparticles on a reduced graphene oxide (RGO) matrix (nano‐Ni@C/RGO) as a high‐performance H2O2fuel catalyst. The Joule heating temperature can reach up to ≈2400 K and the heating time can be less than 0.1 s. Ni microparticles with an average diameter of 2 µm can be directly converted into nanoparticles with an average diameter of 75 nm. The Ni nanoparticles embedded in RGO are evaluated for electro‐oxidation performance as a H2O2fuel in a direct peroxide–peroxide fuel cell, which exhibits an electro‐oxidation current density of 602 mA cm−2at 0.2 V (vs Ag/AgCl), ≈150 times higher than the original Ni microparticles embedded in the RGO matrix (micro‐Ni/RGO). The high‐temperature, fast Joule heating process also leads to a 4–5 nm conformal carbon coating on the surface of the Ni nanoparticles, which anchors them to the RGO nanosheets and leads to an excellent catalytic stability. The newly developed nano‐Ni@C/RGO composites by Joule heating hold great promise for a range of emerging energy applications, including the advanced anode materials of fuel cells.more » « less
-
Abstract Transition metal chalcogenide nanoparticles (NPs) are of interest for energy applications, including batteries, supercapacitors, and electrocatalysis. Many methods have been established for synthesizing Ni NPs, and conversion chemistry to form Ni oxide and phosphides from template Ni NPs is well‐understood. Sulfidation and selenidation of Ni NPs have been much less explored, however. We report a method for the conversion of Ni template NPs into sulfide and selenide product NPs using elemental sulfur, 1‐hexadecanthiol, thiourea, trioctylphosphine sulfide, elemental selenium, and selenourea. While maintaining mole ratios of 2 mmol sulfur/selenium precursor: mmol Ni, products with phases of Ni3S2, Ni9S8, NiS, NiSO4·6H2O, Ni3S4, Ni3Se2, and NiSe have been obtained. The products have voids that form through the Kirkendall effect during interdiffusion. Trends relating the chemical properties of the precursors to the phases of the products have been identified. While some precursors contained phosphorus, there was no significant incorporation of phosphorus in any of the products. An increase of the NP size during sulfidation and selenidation is consistent with ripening. The application of Ni sulfide and selenide NPs as electrocatalysts for the hydrogen evolution reaction is also demonstrated.more » « less
-
Planar MO 3 (M = B, C, N) units have frequently been considered important structural components of novel birefringent crystal materials. An efficient approach for constructing new functional crystals is to simultaneously assemble multiple structural motifs together. Two compounds, Na 3 Rb 6 (CO 3 ) 3 (NO 3 ) 2 X·6H 2 O (X = Br and Cl), were synthesized by the integration of three kinds of anionic groups. More interestingly, the [CO 3 ] 2− and [NO 3 ] − groups in Na 3 Rb 6 (CO 3 ) 3 (NO 3 ) 2 X·6H 2 O are all coplanar with the aid of [NaO 7 ] 13− polyhedra, which can enhance the anisotropic polarizability. Na 3 Rb 6 (CO 3 ) 3 (NO 3 ) 2 X·6H 2 O have a large theoretical birefringence of ∼0.165 at 1064 nm and possess a short UV cut-off edge of ∼230 nm. Additionally, the two compounds exhibit good crystal growth habits. These properties illustrate that Na 3 Rb 6 (CO 3 ) 3 (NO 3 ) 2 X·6H 2 O are promising UV birefringent crystals.more » « less
