More Like this

1. Activating the oxygen electrocatalytic activity of layer-structured Ca _0.5 CoO ₂ nanofibers by iron doping

   https://doi.org/10.1039/D1DT03883D  

   Li, Mingyu; Zhao, Bote; Zhao, Yun; Chen, Yu; Liu, Meilin (March 2022, Dalton Transactions)

   The development of low-cost, highly efficient and stable electrocatalysts for the oxygen evolution reaction (OER) is of great significance for many promising energy storage and conversion applications, including metal–air batteries and water splitting technology. Here we report a layer-structured Ca 0.5 CoO 2 nanofibers composed of interconnected ultrathin nanoplates, synthesized using an electrospinning process. The OER activity of Ca 0.5 CoO 2 can be dramatically improved by iron doping, and the overpotential of Ca 0.5 Co 1− x Fe x O 2 ( x = 0.25) is only 346 mV at a current density of 10 mA cm −2 . The mass activity and intrinsic activity of Ca 0.5 Co 0.75 Fe 0.25 O 2 at 1.6 V are, respectively, ∼18.7 and ∼11.4 times higher than those of Ca 0.5 CoO 2 . Iron doping modifies the electronic structure of Ca 0.5 CoO 2 , resulting in partial oxidation of the surface cobalt and increased amount of highly oxidative species (O 2 2− /O 2 ). Consequently, Ca 0.5 Co 0.75 Fe 0.25 O 2 nanofibers with tuned electronic states have shown great potential as cost-effective and efficient electrocatalysts for OER. 

   more » « less
2. Effect of doping TiO ₂ with Mn for electrocatalytic oxidation in acid and alkaline electrolytes

   https://doi.org/10.1039/D2YA00027J  

   Vallez, Lauren; Jimenez-Villegas, Santiago; Garcia-Esparza, Angel T.; Jiang, Yue; Park, Sangwook; Wu, Qianying; Gill, Thomas Mark; Sokaras, Dimosthenis; Siahrostami, Samira; Zheng, Xiaolin (June 2022, Energy Advances)

   Electrochemical oxidation of water and electrolyte ions is a sustainable method for producing energy carriers and valuable chemicals. Among known materials for catalyzing oxidation reactions, titanium dioxide (TiO 2 ) offers excellent electrochemical stability but is less active than many other metal oxides. Herein, we used density functional theory calculations to predict an increase in catalytic activity by doping anatase TiO 2 with manganese atoms (Mn). We synthesized Mn-doped TiO 2 and then utilized X-ray absorption spectroscopy to study the chemical environment around the Mn site in the TiO 2 crystal structure. Our electrochemical experiments confirmed that TiO 2 , with the optimal amount of Mn, reduces the onset potential by 260 mV in a 2 M KHCO 3 (pH = ∼8) electrolyte and 370 mV in a 0.5 M H 2 SO 4 (pH = ∼0.5) electrolyte. Moreover, in 0.5 M H 2 SO 4 , we observed that the amount of Mn doping greatly impacts the selectivity towards oxygen production versus peroxysulfate formation. In 2 M KHCO 3 , the Mn doping of TiO 2 slightly decreases the selectivity towards oxygen production and increases the hydrogen peroxide formation. The Mn-doped TiO 2 shows good electrochemical stability for over 24 hours in both electrolytes. 

   more » « less
3. Experimental and theoretical investigation of FeCrVAl and related compounds

   https://doi.org/10.1088/1402-4896/aca446  

   Lukashev, Pavel V; Stuelke, Lukas; Pottebaum, Zach; Moua, Young; Baker, Gavin; Wysong, Jax; Flesche, Matthew; Valloppilly, Shah; Shand, Paul M; Kharel, Parashu (November 2022, Physica Scripta)

   Abstract We have carried out a combined theoretical and experimental investigation of FeCrVAl, and the effect of Mn and Co doping on its structural, magnetic, and electronic band properties. Our first principles calculations indicate that FeCrVAl, FeCr 0.5 Mn 0.5 VAl, and FeCr 0.5 Co 0.5 VAl exhibit nearly perfect spin polarization, which may be further enhanced by mechanical strain. At the same time, FeCrV 0.5 Mn 0.5 Al and FeCrV 0.5 Co 0.5 Al exhibit a relatively small value of spin polarization, making them less attractive for practical applications. Using arc melting and high vacuum annealing, we synthesized three compounds FeCrVAl, FeCr 0.5 Mn 0.5 VAl, and FeCr 0.5 Co 0.5 VAl, which are predicted to exhibit high spin polarization. The room temperature x-ray diffraction patterns of all samples are fitted with full B2 type disorder with a small amount of FeO 2 secondary phase. All samples show very small saturation magnetizations at room temperature. The thermomagnetic curves M(T) of FeCrVAl and FeCr 0.5 Co 0.5 VAl are similar to that of a paramagnetic material, whereas that of FeCr 0.5 Mn 0.5 VAl indicates ferrimagnetic behavior with the Curie temperature of 135 K. Our findings may be of interest for researchers working on Heusler compounds for spin-based electronic applications. 

   more » « less
4. Synergistic promotion of transition metal ion-exchange in TiO ₂ nanoarray-based monolithic catalysts for the selective catalytic reduction of NO _x with NH ₃

   https://doi.org/10.1039/D2CY00996J  

   Lu, Xingxu; Dang, Yanliu; Li, Meilin; Zhu, Chunxiang; Liu, Fangyuan; Tang, Wenxiang; Weng, Junfei; Ruan, Mingyue; Suib, Steven L.; Gao, Pu-Xian (July 2022, Catalysis Science & Technology)

   TiO 2 supported catalysts have been widely studied for the selective catalytic reduction (SCR) of NO x ; however, comprehensive understanding of synergistic interactions in multi-component SCR catalysts is still lacking. Herein, transition metal elements (V, Cr, Mn, Fe, Co, Ni, Cu, La, and Ce) were loaded onto TiO 2 nanoarrays via ion-exchange using protonated titanate precursors. Amongst these catalysts, Mn-doped catalysts outperform the others with satisfactory NO conversion and N 2 selectivity. Cu co-doping into the Mn-based catalysts promotes their low-temperature activity by improving reducibility, enhancing surface Mn 4+ species and chemisorbed labile oxygen, and elevating the adsorption capacity of NH 3 and NO x species. While Ce co-doping with Mn prohibits the surface adsorption and formation of NH 3 and NO x derived species, it boosts the N 2 selectivity at high temperatures. By combining Cu and Ce as doping elements in the Mn-based catalysts, both the low-temperature activity and the high-temperature N 2 selectivity are enhanced, and the Langmuir–Hinshelwood reaction mechanism was proved to dominate in the trimetallic Cu–Ce–5Mn/TiO 2 catalysts due to the low energy barrier. 

   more » « less
5. Epitaxial growth and magnetic properties of kagome metal FeSn/elemental ferromagnet heterostructures

   https://doi.org/10.1063/5.0188457  

   Laxmeesha, Prajwal M.; Tucker, Tessa D.; Rai, Rajeev Kumar; Li, Shuchen; Yoo, Myoung-Woo; Stach, Eric A.; Hoffmann, Axel; May, Steven J. (February 2024, Journal of Applied Physics)

   Binary kagome compounds TmXn (T = Mn, Fe, Co; X = Sn, Ge; m:n = 3:1, 3:2, 1:1) have garnered recent interest owing to the presence of both topological band crossings and flatbands arising from the geometry of the metal-site kagome lattice. To exploit these electronic features for potential applications in spintronics, the growth of high-quality heterostructures is required. Here, we report the synthesis of Fe/FeSn and Co/FeSn bilayers on Al2O3 substrates using molecular beam epitaxy to realize heterointerfaces between elemental ferromagnetic metals and antiferromagnetic kagome metals. Structural characterization using high-resolution x-ray diffraction, reflection high-energy electron diffraction, and electron microscopy reveals that the FeSn films are flat and epitaxial. Rutherford backscattering spectroscopy was used to confirm the stoichiometric window where the FeSn phase is stabilized, while transport and magnetometry measurements were conducted to verify metallicity and magnetic ordering in the films. Exchange bias was observed, confirming the presence of antiferromagnetic order in the FeSn layers, paving the way for future studies of magnetism in kagome heterostructures and potential integration of these materials into devices. 

   more » « less