skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Pristine carbon nanotubes are efficient absorbers at radio frequencies
Abstract Radio frequency ablation and microwave hyperthermia are powerful tools for destroying dysfunctional biological tissues. However, wireless application of these techniques is hindered by their inability to focus the electromagnetic energy to small targets. The use of locally injected radio frequency- or microwave-absorbing nanomaterials can help to overcome this challenge by confining heat production to the injected region. Previous theoretical work suggests that high-aspect-ratio conducting nanomaterials, such as carbon nanotubes, offer powerful radio frequency and microwave absorption. While carbon nanotubes have been demonstrated as radiothermal agents, common solubilization methods may reduce their absorption efficiency, yielding undesirable nonspecific heating in the biological tissue background. In this manuscript, we hypothesize that pristine carbon nanotubes can act as efficient absorbers at radio frequencies, thus providing differential heating over the tissue background. Specifically, we use a sonication-free preparation technique to preserve both the high aspect ratio and local concentration of pristine carbon nanotubes. We validate the differential heating of these samples by 4.5-fold at 2 GHz compared to the heating of saline at a physiological concentration using infrared thermography. In addition, we successfully achieved local heating of pristine carbon nanotubes within a three-dimensional biological tissue phantom. Numerical simulations further aid in producing a temperature map within the phantom and confirming localized heating. Due to their significant differential and local heating, we believe that pristine carbon nanotubes may facilitate region-specific radio frequency ablation and microwave hyperthermia while keeping nonspecific heating to a low level in the normal tissue background.  more » « less
Award ID(s):
2217582
PAR ID:
10427527
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Nanotechnology
Volume:
33
Issue:
34
ISSN:
0957-4484
Page Range / eLocation ID:
345102
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Fluids)
    null (Ed.)
    This work discusses in vivo experiments that were performed to evaluate whether local or whole-body heating to 40 °C reduced interstitial fluid pressures (IFPs) and enhanced nanoparticle delivery to subcutaneous PC3 human prostate cancer xenograft tumors in mice. After heating, 0.2 mL of a previously developed nanofluid containing gold nanoparticles (10 mg Au/mL) was injected via the tail vein. The induced whole-body hyperthermia led to increases in tumor and mouse body blood perfusion rates of more than 50% and 25%, respectively, while the increases were much smaller in the local heating group. In the whole-body hyperthermia groups, the IFP reduction from the baseline at the tumor center immediately after heating was found to be statistically significant when compared to the control group. The 1 h of local heating group showed IFP reductions at the tumor center, while the IFPs increased in the periphery of the tumor. The intratumoral gold nanoparticle accumulation was quantified using inductively coupled plasma mass spectrometry (ICP-MS). Compared to the control group, 1 h or 4 h of experiencing whole-body hyperthermia resulted in an average increase of 51% or 67% in the gold deposition in tumors, respectively. In the 1 h of local heating group, the increase in the gold deposition was 34%. Our results suggest that 1 h of mild whole-body hyperthermia may be a cost-effective and readily implementable strategy for facilitating nanoparticle delivery to PC3 tumors in mice. 
    more » « less
  2. ; ; ; ; ; (, Applied Sciences)
    Today, magnetic hyperthermia constitutes a complementary way to cancer treatment. This article reports a promising aspect of magnetic hyperthermia addressing superparamagnetic and highly Fe/Au core-shell nanoparticles. Those nanoparticles were prepared using a wet chemical approach at room temperature. We found that the as-synthesized core shells assembled with spherical morphology, including face-centered-cubic Fe cores coated and Au shells. The high-resolution transmission microscope images (HRTEM) revealed the formation of Fe/Au core/shell nanoparticles. The magnetic properties of the samples showed hysteresis loops with coercivity (HC) close to zero, revealing superparamagnetic-like behavior at room temperature. The saturation magnetization (MS) has the value of 165 emu/g for the as-synthesized sample with a Fe:Au ratio of 2:1. We also studied the feasibility of those core-shell particles for magnetic hyperthermia using different frequencies and different applied alternating magnetic fields. The Fe/Au core-shell nanoparticles achieved a specific absorption rate of 50 W/g under applied alternating magnetic field with amplitude 400 Oe and 304 kHz frequency. Based on our findings, the samples can be used as a promising candidate for magnetic hyperthermia for cancer therapy. 
    more » « less
  3. ; ; (, 2019 ASA, CSSA, and SSSA Annual Meeting)
    Legionella pneumophila is a virulent bacterial pathogen that can cause a severe and deadly form of pneumonia called Legionnaires’ disease. Documented cases of Legionnaires’ disease have been rising since 2000. Risk of infection increases when L. pneumophila are harbored inside free-living amoebae, which are resistant to traditional disinfection processes. The ability of amoebae to phagocytose L. pneumophila allows amoebae to act as ‘Trojan horses’ for pathogen transport. This project aims to extract an unintended benefit from low-intensity microwave (MW) radiation (already found in many homes across economic cross-sections) by employing nanomaterials (e.g., silver, copper oxide, and carbon nanotubes) that are capable of harnessing such radiation and localizing the otherwise dissipated energy. In this alternative technology, we hypothesize that amoebae will be lysed via localized interfacial heating, and the released L. pneumophila will be inactivated subsequently by heat, metal ions (from nanoparticle dissolution), and reactive oxygen species (ROS) produced in the process. Traditionally, inactivation of up to 3-logs of planktonic L. pneumophila with dissolved silver requires hours of contact time. This study reports rapid inactivation (in minutes) of 3-log or higher when the planktonic L. pneumophila is subjected to AgNPs (5 mg/L) and MW radiation (2,450 MHz; 70 W). Ensuing phases of this project will incorporate copper oxide nanoparticles – which are anticipated to increase toxicity akin to copper-silver ionization systems currently employed in hospitals for L. pneumophila control – and enhance inactivation potency with potentially lower microwave radiation input and/or a lower concentration of nanoparticles. Ultimately, the nanomaterials will be immobilized on a plaster of Paris or ceramic surface for flow-through applications for lysing amoebae and inactivating L. pneumophila. 
    more » « less
  4. ; ; ; ; ; ; ; (, Advanced Functional Materials)
    Abstract Traditional deep fluorescence imaging has primarily focused on red‐shifting imaging wavelengths into the near‐infrared (NIR) windows or implementation of multi‐photon excitation approaches. Here, the advantages of NIR and multiphoton imaging are combined by developing a dual‐infrared two‐photon microscope that enables high‐resolution deep imaging in biological tissues. This study first computationally identifies that photon absorption, as opposed to scattering, is the primary contributor to signal attenuation. A NIR two‐photon microscope is constructed next with a 1640 nm femtosecond pulsed laser and a NIR PMT detector to image biological tissues labeled with fluorescent single‐walled carbon nanotubes (SWNTs). Spatial imaging resolutions are achieved close to the Abbe resolution limit and eliminate blur and background autofluorescence of biomolecules, 300 µm deep into brain slices and through the full 120 µm thickness of aNicotiana benthamianaleaf. NIR‐II two‐photon microscopy can also measure tissue heterogeneity by quantifying how much the fluorescence power law function varies across tissues, a feature this study exploits to distinguish Huntington's Disease afflicted mouse brain tissues from wildtype. These results suggest dual‐infrared two‐photon microscopy can accomplish in‐tissue structural imaging and biochemical sensing with a minimal background, and with high spatial resolution, in optically opaque or highly autofluorescent biological tissues. 
    more » « less
  5. (, Philosophical transactions of the Royal Society of London)
    null (Ed.)
    Cement is the most widely consumed material globally, with the cement industry accounting for 8% of human-caused greenhouse gas emissions. Aiming for cement composites with a reduced carbon footprint, this study investigates the potential of nanomaterials to improve mechanical characteristics. An important question is to increase the fraction of carbon-based nanomaterials within cement matrices while controlling the microstructure and enhancing the mechanical performance. Specifically, this study investigates the fracture response of Portland cement reinforced with 1D and 2D carbon-based nanomaterials, such as carbon nanofibers, multiwalled carbon nanotubes, helical carbon nanotubes, and graphene oxide nanoplatelets. Novel processing routes are shown to incorporate 0.1–0.5 wt% of nanomaterials into cement using a quadratic distribution of ultrasonic energy. Scratch testing is used to probe the fracture response by pushing a sphero-conical probe against the surface of the material under a linearly increasing vertical force. Fracture toughness is then computed using a nonlinear fracture mechanics model. Nanomaterials are shown to bridge nanoscale air voids, leading to pore refinement, and a decrease in the porosity and the water absorption. An improvement in fracture toughness is observed in cement nanocomposites, with a positive correlation between the fracture toughness and the mass fraction of nanofiller for graphene-reinforced cement. Moreover, for graphene-reinforced cement, the fracture toughness values are in the range of 0.701 to 0.717 MPa.sqrt(m). Thus, this study illustrates the potential of nanomaterials to toughen cement while improving the microstructure and water resistance properties. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email