Janus structures have unique properties due to their distinct functionalities on opposing faces, but have yet to be realized with flowing liquids. We demonstrate such Janus liquids with a customizable distribution of nanoparticles (NPs) throughout their structures by joining two aqueous streams of NP dispersions in an apolar liquid. Using this anisotropic integration platform, different magnetic, conductive, or non-responsive NPs can be spatially confined to opposite sides of the original interface using magnetic graphene oxide (mGO)/GO, Ti3C2T
MXene and graphene cryogels have demonstrated excellent electromagnetic interference (EMI) shielding effectiveness due to their exceptional electrical conductivity, low density, and ability to dissipate electromagnetic waves through numerous internal interfaces. However, their synthesis demands costly reduction techniques and/or pre‐processing methods such as freeze‐casting to achieve high EMI shielding and mechanical performance. Furthermore, limited research has been conducted on optimizing the cryogel microstructures and porosity to enhance EMI shielding effectiveness while reducing materials consumption. Herein, a novel approach to produce ultra‐lightweight cryogels composed of Ti3C2T
- Award ID(s):
- 2134607
- PAR ID:
- 10438999
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 33
- Issue:
- 50
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract x /GO, or GO suspensions. The resultant Janus liquids can be used as templates for versatile, responsive, and mechanically robust aerogels suitable for piezoresistive sensing, human motion monitoring, and electromagnetic interference (EMI) shielding with a tuned absorption mechanism. The EMI shields outperform their current counterparts in terms of wave absorption, i.e., SET ≈ 51 dB, SER ≈ 0.4 dB, and A = 0.91, due to their high porosity ranging from micro- to macro-scales along with non-interfering magnetic and conductive networks imparted by the Janus architecture. -
more » « less
Abstract Lightweight, flexible, and electrically conductive thin films with high electromagnetic interference (EMI) shielding effectiveness are highly desirable for next‐generation portable and wearable electronic devices. Here, spin spray layer‐by‐layer (SSLbL) to rapidly assemble Ti3C2T
x MXene‐carbon nanotube (CNT) composite films is shown and their potential for EMI shielding is demonstrated. The SSLbL technique allows strategic combinations of nanostructured materials and polymers providing a rich platform for developing hierarchical architectures with desirable cross‐functionalities including controllable transparency, thickness, and conductivity, as well as high stability and flexibility. These semi‐transparent LbL MXene‐CNT composite films show high conductivities up to 130 S cm−1and high specific shielding effectiveness up to 58 187 dB cm2g−1, which is attributed to both the excellent electrical conductivity of the conductive fillers (i.e., MXene and CNT) and the enhanced absorption with the LbL architecture of the films. Remarkably, these values are among the highest reported values for flexible and semi‐transparent composite thin films. This work could offer new solutions for next‐generation EMI shielding challenges. -
more » « less
Abstract Silk nanofibers (SNFs) from abundant sources are low‐cost and environmentally friendly. Combined with other functional materials, SNFs can help create bioelectronics with excellent biocompatibility without environmental concerns. However, it is still challenging to construct an SNF‐based composite with high conductivity, flexibility, and mechanical strength for all SNF‐based electronics. Herein, this work reports the design and fabrication of Ti3C2T
x ‐silver@silk nanofibers (Ti3C2Tx‐Ag@SNF) composites with multi‐dimensional heterogeneous conductive networks using combined in situ growth and vacuum filtration methods. The ultrahigh electrical conductivity of Ti3C2Tx ‐Ag@SNF composites (142959 S m−1) provides the kirigami‐patterned soft heaters with a rapid heating rate of 87 °C s−1. The multi‐dimensional heterogeneous network further allows the creation of electromagnetic interference shielding devices with an exceptionally high specific shielding effectiveness of 10,088 dB cm−1. Besides working as a triboelectric layer to harvest the mechanical energy and recognize the hand gesture, the Ti3C2Tx ‐Ag@SNF composites can also be combined with an ionic layer to result in a capacitive pressure sensor with a high sensitivity of 410 kPa−1in a large range due to electronic‐double layer effect. The applications of the Ti3C2Tx ‐Ag@SNF composites in recognizing human gestures and human‐machine interfaces to wirelessly control a trolley demonstrate the future development of all SNF‐based electronics. -
more » « less
Abstract The synthesis and characterization of epoxy‐based composites with few‐layer graphene fillers, which are capable of dual‐functional applications, are reported. It is found that composites with certain types of few‐layer graphene fillers reveal an efficient total electromagnetic interference shielding, SEtot≈ 45 dB, in the important X‐band frequency range,
f = 8.2 −12.4 GHz, while simultaneously providing high thermal conductivity,K ≈ 8 W m−1K−1, which is a factor of ×35 larger than that of the base matrix material. The efficiency of the dual‐functional application depends on the filler characteristics: thickness, lateral dimensions, aspect ratio, and concentration. Graphene loading fractions above the electrical and thermal “percolation thresholds” allow for strong enhancement of both the electromagnetic interference shielding and heat conduction properties. Interestingly, graphene composites can block the electromagnetic energy even below the electrical percolation threshold, remaining electrically insulating, which is an important feature for some types of thermal interface materials. The dual functionality of the graphene composites can substantially improve the electromagnetic shielding and thermal management of airborne systems while simultaneously reducing their weight and cost. -
more » « less
Abstract Simulation and experimental studies are carried out on single‐layer and double‐layer embedded metal meshes (SLEMM and DLEMM) to assess their performance as transparent electromagnetic interference (EMI) shielding. The structures consist of silver meshes embedded in polyethylene terephthalate (PET). As a transparent electrode, SLEMMs exhibit a transparency of 82.7% and a sheet resistance of 0.61 Ωsq−1as well as 91.0% and 1.49 Ωsq−1. This performance corresponds to figures of merit of 3101 and 2620, respectively. The SLEMMs achieve 48.0 dB EMI shielding efficiency (SE) in the frequency range of 8–18 GHz (X‐ and Ku‐bands) with 91% visible transmission and 56.2 dB EMI SE with 82.7% visible transmission. Samples exhibit stable performance after 1000 bending cycles with a radius of curvature of 4 mm and 60 tape test cycles. DLEMMs consist of fabricating SLEMM on opposite sides of the substrate where the distance can be varied using a spacer. Simulations are performed to investigate how varying spacer distance between two layers of metal meshes influences the EMI SE. DLEMMs are fabricated and achieved an EMI SE of 77.7 dB with 81.7% visible transmission. SLEMMs and DLEMMs may have a wide variety of applications in aerospace, medical, and military applications.
