An official website of the United States government
Abstract. Basal materials in ice cores hold information about paleoclimate conditions, glacial processes, and the timing of past ice-free intervals, all of which aid understanding of ice sheet stability and its contribution to sea level rise in a warming climate. Only a few cores have been drilled through ice sheets into the underlying sediment and bedrock, producing limited material for analysis. The last of three Camp Century ice cores, which the U.S. Army collected in northwestern Greenland from 1963–1966 CE, recovered about 3.5 m of subglacial material, including ice and sediment. Here, we document the scientific history of the Camp Century subglacial material. We present our recent core-cutting, sub-sampling, and processing methodology and results for this unique archive. In 1972 CE, curators at the Buffalo, New York, Ice Core Laboratory cut the original core sections into 32 segments that were each about 10 cm long. Since then, two segments were lost and are unaccounted for, two were thawed, and two were cut as pilot samples in 2019 CE. Except for the two thawed segments, the rest of the extant core has remained frozen since collection. In 2021 CE, we documented, described, and then cut each of the remaining frozen archived segments (n=26). We saved an archival half and cut the working half into eight oriented sub-samples under controlled temperature and light conditions for physical, geochemical, isotopic, sedimentological, magnetic, and biological analyses. Our approach was designed to maximize sample usage for multiproxy analysis, minimize contamination, and preserve archive material for future analyses of this legacy subglacial material. Grain size, bulk density, sedimentary features, magnetic susceptibility, and ice content, as well as pore ice pH and conductivity, suggest that the basal sediment contains five stratigraphic units. We interpret these stratigraphic units as representing different depositional environments in subglacial or ice-free conditions: from bottom to top, a diamicton with subhorizontal ice lenses (Unit 1), vertically fractured ice with dispersed fine-grained sediments (<20 % in mass) (Unit 2), a normally graded bed of pebbles to very fine sand in an icy matrix (Unit 3), bedded very fine to fine sand (Unit 4), and stratified medium to coarse sand (Unit 5). Plant macrofossils are present in all samples and are most abundant in Units 3 and 4; insect remains are present in some samples (Units 1, 3, and 5). Our approach provides a working template for future studies of ice core basal materials because it includes intentional planning of core sub-sampling, processing methodologies, and archiving strategies to optimize the collection of paleoclimate, glacial process, geochemical, geochronological, and sediment properties from archives of limited size. Our work benefited from a carefully curated and preserved archive, allowing the application of analytical techniques not available in 1966 CE. Preserving uncontaminated core material for future analyses that use currently unavailable tools and techniques is an important consideration for rare archive materials such as these from Camp Century.
more »
« less
Grain size and mineral variability of glacial marine sediments
ABSTRACT Glacial marine sediment deposition varies both spatially and temporally, but nearly all studies evaluate down-core (∼ time) variations in sediment variables with little consideration for across core variability, or even the consistency of a data set over distance scales of 1 to 1000 m. Grain size and quantitative X-ray diffraction (qXRD) methods require only ≤ 1 g of sediment and thus analyses assume that the identification of coarse sand (i.e., ice-rafted debris) and sediment mineral composition are representative of the depth intervals. This assumption was tested for grain size and mineral weight % on core MD99-2317, off East Greenland. Samples were taken from two sections of the core that had contrasting coarse-sand content. A total of fourteen samples were taken consisting of seven (vertical) and two (horizontal) samples, with five replicates per sample for qXRD analyses and ∼ 10 to 20 replicates for grain size. They had an average dry weight of 10.5 ± 0.5 g and are compared with two previous sets of sediment samples that averaged 54.1 ± 18.9 g and 20.77 ± 5.8 g dry weight. The results indicated some significant differences between the pairs of samples for grain-size parameters (mean sortable silt, and median grain size) but little difference in the estimates of mineral weight percentages. Out of 84 paired mineral and grain-size comparisons only 17 were significantly different at p = < 0.05 in the post-hoc Scheffe test, all of which were linked to grain-size attributes.
more »
« less
- Award ID(s):
- 1804504
- PAR ID:
- 10439742
- Date Published:
- Journal Name:
- Journal of Sedimentary Research
- Volume:
- 93
- Issue:
- 1
- ISSN:
- 1527-1404
- Page Range / eLocation ID:
- 37 to 49
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This file contains grain-size data from seabed shipek grab samples collected from R/V Ukpik in summer 2021 as part of NSF project 1913195 (Arctic Shelf sediment fate – an observational and modeling study of sediment pathways and morphodynamic feedbacks in a changing polar environment). Samples were collected from across Harrison Bay on the Alaskan Beaufort Shelf, north of the Colville River and between Oliktok Point and Cape Halkett. Samples were bagged in the field and returned to the University of North Carolina at Chapel Hill where grain-size analyses were performed using an Escitec Bettersizer S3Plus laser diffraction sensor. Samples were sonicated for two minutes prior to analyses. Samples ranged from well sorted sands (typically medium sand or fine) to poorly sorted bimodal sands and muds to unimodal muds. In the field, samples exhibited diverse textures including mud clasts and very stiff muds.more » « less
-
null (Ed.)Grain size distributions of 311 sediment samples from Sites U1450 and U1451 of International Ocean Discovery Program (IODP) Expedition 354 were determined using laser diffraction. Most of the samples were from turbidites, but some hemipelagic beds were also examined. The mean grain size values show that silt-sized particles are the dominant textural class, whereas the grain size values range from clay to coarse-grained sand. An overall upward change in mean grain size value reveals a slight coarsening-upward trend. However, other parameters such as standard deviation, skewness, and kurtosis show no systematic relationship with depth in the holes. The analyzed samples cover the age range from recent to early Miocene. Shepard textural classification plots show the sediments are mostly sandy silts, silty sands, and clayey silts with a few silts and sands also present. Frequency curve plots of samples from individual turbidite beds show inversely graded beds are most common at Site U1450, whereas thicker massive beds are dominant at Site U1451.more » « less
-
While a large amount of research has been performed in recent years on characterizing wildfire ashes and determining the hydrological properties of slopes post-wildfire, fewer studies have concentrated on the overall engineering behavior of ash. This study addresses this need by examining the compaction, shear strength, and hydraulic behavior of wildfire ash and ash/soil layered specimens. Unique chemical and physical characteristics of wildfire ashes were shown to influence the ash engineering behavior. Ashes in the as-received condition have a silty sand grain size distribution with higher than expected surface areas (>1 m2/g). Chemically, ashes contained silica, aluminum, calcium (in the form of carbonates) and residual organic carbon from incomplete combustion. Maximum dry unit weights ranged from 13 – 16 kN/m3 at optimum moisture contents between 20 and 30%. Hydraulic conductivity of samples varied between 10^-4 and 10^-5 cm/s. A wet deposited layer of fine-grained ash on top of compacted sand reduced the hydraulic conductivity of sand by 1 – 3 orders of magnitude. Shear strength of ash/sand layered specimens demonstrated that ash was fairly stiff, with an average friction angle of 28 degrees. Void ratios of specimens were consistently higher than expected for a silty sand fabric (usually above 1.0). Ash particles were irregular in shape with fibrous textures and had electrostatic attractive tendencies. The authors suspect that the unique chemistries present in ash (notably carbonates and organic char) contributed to the loose fabric structure and engineering properties that were atypical of a silty sand grain size distributionmore » « less
-
Hayes, Donald F (Ed.)SedImaging is an innovative alternative particle size analysis method developed to obtain high-resolution particle size distributions (PSDs) of sands. It was developed at the University of Michigan (UM) and is based on wet processing and digital image analyses of fine to medium sands. This work summarizes a variant of the SedImaging method, named FieldSed, which was first applied in a field lab setting for a sediments site by the authors and colleagues in October 2017. The goal of this work was to detect subtle variations in the fine sand and fines compositions as a pilot test at a field laboratory, without use of a sieve set or oven drying. The testing program included replicates, independent testing by UM, and other quality control measures. Sediment processing included wet-removal of fines and particles larger than coarse sand; preparation of the sample in a pre-sorter tube followed by sedimentation in a tall, water-filled column to sort the sands; and the collection and analysis of high-resolution digital imagery of the settled sand. The FieldSed method included variations to estimate mass percentages of oversized (> 2 millimeters [mm]) and undersized (< 0.075 mm) sediments, and throughput improvement. Wet sieving and air drying were used to separate and prepare oversized sediments for weighing. Multiple decants of sediment-water mixtures were used to wash out more dispersive fines. Decanted fines contents were estimated by differences in wet weights and by specific gravity approximations. Digital images were analyzed and used to generate highresolution PSDs, which typically included more than 80 size bins from 2 mm to less than 0.050 mm. The FieldSed method was successful in clearly distinguishing coarse and fine material, as well as defining the gradient between medium sands, fine sands, and coarse silts. Color, angularity, and other grain characteristics from the digital imagery were noted. With further testing to improve processing rates and efficiencies, the method could be applied to provide same-day field decisions. More efficient and faster processing could be achieved for characterization of cleaner sands, and applications could be expanded further, such as to assess suitability of post-dredge sand cover materials in the field.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.2110/jsr.2022.044
