GaN high-electron-mobility transistors (HEMTs) are known to have no avalanche capability and insufficient short-circuit robustness. Recently, breakthrough avalanche and short-circuit capabilities have been experimentally demonstrated in a vertical GaN fin-channel junction-gate field-effect transistor (Fin-JFET), which shows a good promise for using GaN devices in automotive powertrains and electric grids. In particular, GaN Fin-JFETs demonstrated good short-circuit capability at avalanche breakdown voltage (BV AVA ), with a failure-to-open-circuit (FTO) signature. This work presents a comprehensive device physics-based study of the GaN Fin-JFET under short-circuit conditions, particularly at a bus voltage close to BV AVA . Mixed-mode electrothermal TCAD simulations were performed to understand the carrier dynamics, electric field distributions, and temperature profiles in the Fin-JFET under short-circuit and avalanche conditions. The results provide important physical references to understand the unique robustness of the vertical GaN Fin-JFET under the concurrence of short-circuit and avalanche as well as its desirable FTO signature.
more »
« less
GaN-on-GaN p-i-n diodes with avalanche capability enabled by eliminating surface leakage with hydrogen plasma treatment
Traditional mesa terminations require precise angle design to reduce the electric field at the edge and surface treatment to reduce etch damage. Otherwise, the device usually suffers a premature breakdown. This work proposes the use of easy-to-implement hydrogen plasma treatment to solve the premature breakdown caused by mesa and demonstrates the avalanche capability in GaN-on-GaN p-i-n diodes. The breakdown electric field when the avalanche occurred was ∼2.3 MV/cm at room temperature for a GaN drift layer with a doping concentration of ∼7 × 1015 cm−3, which is consistent with the theoretical value. The temperature coefficient of the avalanche breakdown voltage of the devices was 4.64–4.85 × 10−4 K−1. This work shows a simple and effective approach to achieve avalanche capability in vertical GaN power devices, which can serve as an important reference for the future development of efficient and robust GaN power electronics.
more » « less- NSF-PAR ID:
- 10439980
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- Applied Physics Letters
- Volume:
- 121
- Issue:
- 9
- ISSN:
- 0003-6951
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This abstract presents a study on the avalanche capability of GaN p-i-n diode leading to the achievement of 60A/W, 278V GaN avalanche photodiode. The GaN p-i-n diode fabricated on a free-standing GaN substrate was avalanche capable due to optimal edge termination. Both electrical and optical characterizations were conducted to validate the occurrence of avalanche in these devices. The device showed a positive temperature coefficient of breakdown voltage, which follows the nature of avalanche breakdown. The positive coefficient was measured to be 3.85 ×10^(-4) K^(-1) (0.1V/K) under a measurement temperature ranges from 300 K to 525 K. Moreover, the fabricated device showed excellent performance as an avalanche photo detector with record device metrics: (1) record high photoresponsivity of 60 A/W; (2) high optical gain of 10^5 ; and (3) low cark current. Robust avalanche is a key requirement in various device applications and necessary for their reliable operation.more » « less
-
Power devices are highly desirable to possess excellent avalanche and short-circuit (or surge-current) robustness for numerous power electronics applications like automotive powertrains, electric grids, motor drives, among many others. Current commercial GaN power device, the lateral GaN high-electron-mobility transistor (HEMT), is known to have no avalanche capability and very limited short-circuit robustness. These limitations have become a roadblock for penetration of GaN devices in many industrial power applications. Recently, through collaborations with NexGen Power Systems (NexGen), Inc., we have demonstrated breakthrough avalanche, surge-current and short-circuit robustness in NexGen’s vertical GaN p-n diodes and fin-shape junction-gate field-effect-transistors (Fin-JFETs). These large-area GaN diodes and Fin-JFETs were manufactured in NexGen’s 100 mm GaN-on-GaN fab. The demonstrated avalanche, surge-current and short-circuit capabilities are comparable or even superior to Si and SiC power devices. Additionally, vertical GaN Fin-JFETs were found to fail to open-circuit under avalanche and short-circuit conditions, which is highly desirable for the system safety. This talk reviews the key robustness results of vertical GaN power devices and unveils the enabling device physics. Fundamentally, these results signify that, in contrast to some popular belief, GaN devices with appropriate designs can achieve excellent robustness and thereby encounter no barriers for applications in electric vehicles, grids, renewable processing, and industrial motor drives.more » « less
-
more » « less
Polarization-induced (Pi) distributed or bulk doping in GaN, with a zero dopant ionization energy, can reduce temperature or frequency dispersions in impurity-doped p–n junctions caused by the deep-acceptor-nature of Mg, thus offering GaN power devices promising prospects. Before comprehensively assessing the benefits of Pi-doping, ideal junction behaviors and high-voltage capabilities should be confirmed. In this work, we demonstrate near-ideal forward and reverse I–V characteristics in Pi-doped GaN power p–n diodes, which incorporates linearly graded, coherently strained AlGaN layers. Hall measurements show a net increase in the hole concentration of 8.9 × 1016 cm−3in the p-layer as a result of the polarization charge. In the Pi-doped n-layer, a record-low electron concentration of 2.5 × 1016 cm−3is realized due to the gradual grading of Al0-0.72GaN over 1 μm. The Pi-doped p–n diodes have an ideality factor as low as 1.1 and a 0.10 V higher turn-on voltage than the impurity-doped p–n diodes due to the increase in the bandgap at the junction edge. A differential specific on-resistance of 0.1 mΩ cm2is extracted from the Pi-doped p–n diodes, similar with the impurity-doped counterpart. The Pi-doped diodes show an avalanche breakdown voltage of ∼1.25 kV, indicating a high reverse blocking capability even without an ideal edge-termination. This work confirms that distributed Pi-doping can be incorporated in high-voltage GaN power devices to increase hole concentrations while maintaining excellent junction properties.
-
null (Ed.)We demonstrate that the residual carbon concentration in the drift region can have a significant impact on the reverse leakage, breakdown voltage, and breakdown stability of GaN-on-GaN vertical diodes. Two generations (Gen1, Gen2) of polarization-doped p-n junctions with different C concentrations were compared, in terms of avalanche voltage, avalanche instability, and deep-level concentration. The original results collected within this paper show that: 1) both generations of devices can safely reach the avalanche regime; diodes with a lower residual CN have a higher reverse leakage and a lower avalanche voltage, due to an uneven distribution of the electric field; 2) the presence of residual carbon can lead to breakdown walkout, i.e. a recoverable increase in breakdown voltage under reverse-bias stress. Specifically, devices with higher C concentration show a fully-recoverable breakdown walk-out, whereas the breakdown voltage is stable in devices with lowerC concentration;and 3) steady-state photocapacitance measurements confirm the presence of CN in both generations, and are used to assess the relative difference in concentration between Gen1 and Gen2, even for levels below secondary ion mass spectroscopy (SIMS) sensitivity. The results described in this paper indicate the existence of a trade-off between breakdown voltage (increasing by improving compensation) and breakdown stability (improving by reducing CN concentration) and are of fundamental importance for the optimization of GaN power devices.more » « less
