Alluvial fans are found across a range of climates and are built from a combination of fluvial and debris flow processes. Correct identification of process is critical to reconstructing the climate and water histories of alluvial fans on Earth and Mars. Theory and data from subaerial Earth fans are often used to estimate paleoflow discharges and sediment fluxes for martian fans; however, most terrestrial work has been conducted on fans that are in hot, dry climates with runoff sourced from rainfall. This differs from the prevailing interpretation that martian fans were sourced from snowmelt under warming periglacial conditions. To characterize processes and rates of periglacial fan formation, we conducted a field-based study of the Black Mountain alluvial fan in the Aklavik Range, Canada. We observed active fluvial bedload transport as well as several small debris flows that had initiated from ice-filled gullies. Following a runoff event of ∼0.005 mm/hr to ∼0.2 mm/hr across the fan, we estimated sediment fluxes of ∼0.04 m3/hr. Under bankfull conditions, we estimated runoff rates between ∼0.01 mm/hr to ∼14 mm/hr and corresponding sediment fluxes of ∼0.3 m3/hr to ∼550 m3/hr. This suggests that moderate flow events, well below the maximum runoff production rates suggested for Mars, are capable of entraining and transporting appreciable amounts of sediment by fluvial processes. However, sedimentological and geomorphological observations suggest that ∼67% of the fan was deposited fluvially; the remainder was deposited by mass flows. Our results emphasize the need to take care in interpreting martian sedimentary processes and climate from fan surface morphology alone.
more »
« less
Autonomous generation of alluvial fans in landscape evolution models
We develop a robust and simple rule‐based algorithm to autonomously simulate alluvial fan deposition and evolution under continuously developing landscape conditions without prescribing deposition locations or imposing topographic constraints. Augmented with this algorithm, landscape evolution models are capable of dynamically detecting locations of potential fan deposition by statistical measures of surface topography and fluvial dynamics, then depositing fan sediments where and when the developed conditions require. To assess the method's efficacy in depositing sediment at a mountain‐valley transition zone characterized by a transport surface that permits unobstructed exit of sediment and water, a hypothetical scenario is created that involves a frontal, normal fault. It is followed by a series of sensitivity analyses to ascertain the influence of parameters affecting fan deposition and secondary processes. Uplift (
- PAR ID:
- 10441498
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Earth Surface Processes and Landforms
- Volume:
- 48
- Issue:
- 14
- ISSN:
- 0197-9337
- Format(s):
- Medium: X Size: p. 2842-2863
- Size(s):
- p. 2842-2863
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Fluvial fans are large, low-gradient depositional systems that occur in sedimentary basins worldwide. Fluvial fans can represent much of the geologic record of foreland basins, create hazards, and record paleoclimate and tectonic signals. However, we lack an understanding of how fluvial fans grow into the variety of shapes observed around the world. We explored this aspect using a cellular model of foreland basin landscape evolution with rules for sediment transport, river avulsion, and floodplain processes. We tested the hypothesis that avulsion dynamics, namely, avulsion trigger period and abandoned channel dynamics, are a primary control on fluvial fan development. We found that shorter trigger periods lead to rounder planform fluvial fan shapes because, between avulsions, channel aggradation (and thus avulsion setup) propagates shorter distances from the upstream boundary along channel pathways. This prioritizes lateral sediment dispersion, creating shorter, rounder fans, over sediment delivery further into the basin, which would create elongated fans. Modeled fans with abandoned channel attraction (but not repulsion) generated a commonly observed abrupt fan boundary marked by a transition from distributary to tributary channel patterns. While fluvial fans are thought to be linked to climate, they can occur anywhere that rivers aggrade, lose lateral confinement, and preserve alluvial topography. Instead, fluvial fans might be more recognizable in environments that frequently trigger avulsions and preserve abandoned channels that capture future avulsions.more » « less
-
null (Ed.)Abstract. Landslides are the main source of sediment in most mountain ranges. Rivers then act as conveyor belts, evacuating landslide-derived sediment. Sediment dynamics are known to influence landscape evolution through interactions among landslide sediment delivery, fluvial transport and river incision into bedrock. Sediment delivery and its interaction with river incision therefore control the pace of landscape evolution and mediate relationships among tectonics, climate and erosion. Numerical landscape evolution models (LEMs) are well suited to study the interactions among these surface processes. They enable evaluation of a range of hypotheses at varying temporal and spatial scales. While many models have been used to study the dynamic interplay between tectonics, erosion and climate, the role of interactions between landslide-derived sediment and river incision has received much less attention. Here, we present HyLands, a hybrid landscape evolution model integrated within the TopoToolbox Landscape Evolution Model (TTLEM) framework. The hybrid nature of the model lies in its capacity to simulate both erosion and deposition at any place in the landscape due to fluvial bedrock incision, sediment transport, and rapid, stochastic mass wasting through landsliding. Fluvial sediment transport and bedrock incision are calculated using the recently developed Stream Power with Alluvium Conservation and Entrainment (SPACE) model. Therefore, rivers can dynamically transition from detachment-limited to transport-limited and from bedrock to bedrock–alluvial to fully alluviated states. Erosion and sediment production by landsliding are calculated using a Mohr–Coulomb stability analysis, while landslide-derived sediment is routed and deposited using a multiple-flow-direction, nonlinear deposition method. We describe and evaluate the HyLands 1.0 model using analytical solutions and observations. We first illustrate the functionality of HyLands to capture river dynamics ranging from detachment-limited to transport-limited conditions. Second, we apply the model to a portion of the Namche Barwa massif in eastern Tibet and compare simulated and observed landslide magnitude–frequency and area–volume scaling relationships. Finally, we illustrate the relevance of explicitly simulating landsliding and sediment dynamics over longer timescales for landscape evolution in general and river dynamics in particular. With HyLands we provide a new tool to understand both the long- and short-term coupling between stochastic hillslope processes, river incision and source-to-sink sediment dynamics.more » « less
-
more » « less
Abstract Alluvial rivers aggrade, incise, and adjust their sediment‐transport rates in response to changing sediment and water supply. Fluvial landforms, such as river terraces, and downstream stratigraphic archives may therefore record information about past environmental change. Using a physically based model describing sediment transport and long‐profile evolution of alluvial rivers, we explore how their responses to environmental change depend on distance downstream, forcing timescales, and whether sediment or water supply is varied. We show that amplitudes of aggradation and incision, and therefore the likelihood of terrace formation, are greater upstream and in shorter and/or wetter catchments. Aggradation and incision, and therefore terrace ages, may also lag behind environmental change. How sediment‐transport rates evolve depends strongly on whether water or sediment supply is varied. Diverse responses to environmental change could arise in natural alluvial valleys, controlled by their geometry and hydrology, with important implications for paleo‐environmental interpretations of fluvial archives.
-
Large fan-shaped sediment distributary systems (103 – 105 km2), typically referred to as fluvial megafans, are found proximal to topographic barriers within terrestrial basins. Concepts regarding their formation have been focused on water-dominated processes associated with monsoonal climates, high sediment bedload, and flow rate. But are there other processes behind the erratic avulsive channel behavior of some of the largest fans on the planet? This study presents remotely mapped geomorphic observations from megafans including playa lakes, dunes, vegetation patterns, and basin elevation profiles of fans. Corroborating these concepts are field observations drawn from the Chaco Plain of Argentina. Active tectonics set the stage for multiple monsoon-affected eastward-flowing fluvial systems to interact with the northerly prevailing winds from the South American lower-level jet. The Chaco megafans exhibit low overall slope and limited drainage integration creating playas in both abandoned channels within the active fluvial belt and small depressions on the loess-covered floodplains. Chaco forebulge stratigraphy shows that distal from the main fluvial belt multiple loess-paleosol sequences are present up to four meters below the surface. This suggests that where subsidence outpaces fluvial avulsion rates, fine-grain wind-blown detritus aggrades in packages defined by soil profiles. Loessic paleosols are also located proximal to the orographic front, where the development of uplands relative to modern/recent fluvial incision protects the eolian sediments from erosion. Varying temporal cyclicity in aridity and seasonality of precipitation determines the climatic regime that the megafan sediments experience, resulting in megafans covered in complex fabrics of slope-oriented fluvial/pluvial features superimposed on wind-oriented eolian features and vice versa. The interaction of these depositional environments in the Chaco foreland basin highlights the smoothing effect of eolian transport and deposition, which may allow for high-avulsion rates that enhance megafan development. These geomorphic features can be observed on other globally notable megafan basin systems, highlighting the complexity of sediment transport pathways within a terrestrial realm.more » « less
