3D printing (3DP) has been becoming more and more popular throughout the education system from Kindergarten to University. High school is a critical period for students to decide their imminent university major selection which in turn will impact their future career choices. High school students are usually intrigued by hands-on tool such as 3DP which is also an important contributor to other courses such as robotics. The recent years have seen more investment and availability of 3DP in high schools, especially Career and Technical Education (CTE) programs. However, mere availability of 3DP is not enough for teachers to fully utilize its potential in their classrooms. While basic 3DP skills can be obtained through a few hours of training, the basic training is insufficient to ensure effective teaching Engineering Design Process (EDP) at the high school level. To address this problem, this project develops an EDP course tightly integrated with 3DP for preservice teachers (PST) who are going to enter the workforce in high schools. Engineering design process (EDP) has become an essential part for preservice teachers (PST), especially for high school STEM. 3DP brought transformative change to EDP which is an iterative process that needs virtual/physical prototyping. The new PST course on EDP will be purposefully integrated with an in-depth discussion of 3DP. The approach is to dissect a 3D printer’s hardware, explain each component’s function, introduce each component’s manufacturing methods, describe possible defects, and elucidate what works and what does not. This has at least four benefits: 1) PSTs will know what is possibly wrong when a printer or printing process fails, 2) PSTs will learn more manufacturing processes besides 3DP that can be used to support engineering design prototyping, 3) PSTs will know how to design something that can meet the manufacturing constraints, i.e., can be actually fabricated, and 4) reduce errors and frustrations caused by failed design and failed prints which happen frequently to novices in 3DP. After graduation, PSTs will bring the knowledge to their future high schools and will be more confident in teaching engineering design, reverse engineering, prototype development, manufacturing, and technology. The developed course will be implemented and assessed in a future semester.
more »
« less
Machine learning enabled integrated formulation and process design framework for a pharmaceutical 3D printing platform
The pharmaceutical manufacturing sector needs to rapidly evolve to absorb the next wave of disruptive industrial innovations—Industry 4.0. This involves incorporating technologies like artificial intelligence and 3D printing (3DP) to automate and personalize the drug production processes. This study aims to build a formulation and process design (FPD) framework for a pharmaceutical 3DP platform that recommends operating (formulation and process) conditions at which consistent drop printing can be obtained. The platform used in this study is a displacement‐based drop‐on‐demand 3D printer that manufactures dosages by additively depositing the drug formulation as droplets on a substrate. The FPD framework is built in two parts: the first part involves building a machine learning model to simulate the forward problem—predicting printer operation for given operating conditions and the second part seeks to solve and experimentally validate the inverse problem—predicting operating conditions that can yield desired printer operation.
more » « less- Award ID(s):
- 2132142
- NSF-PAR ID:
- 10443359
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- AIChE Journal
- Volume:
- 69
- Issue:
- 4
- ISSN:
- 0001-1541
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Providing drug products for pediatric patients is a challenging problem for the pharmaceutical industry. Children often require flexible low-dose medication with features like taste-masking and ease of swallowing. In recent years, mini-tablets have emerged as an attractive dosing solution that can meet these requirements. They are small form oral dosages around 2-4 mm in diameter that can be dispensed individually or in combination. Conventionally, they are made using methods like direct compression and hot melt extrusion. This study introduces a new technique to make mini-tablets: drop-on-demand 3D printing. Here the active ingredient is suspended in a liquid excipient, the formulation is printed as droplets and each drop is solidified to yield a mini-tablet. An optimal solvent bath that can uniformly capture mini-tablets is designed and dosages of Atorvastatin (active ingredient) are produced as a test case. Quality of these dosages is determined by measuring their content uniformity.more » « less
-
null (Ed.)Abstract While three-dimensional (3D) printing has been making significant strides over the past decades, it still trails behind mainstream manufacturing due to its lack of scalability in both print size and print speed. Cooperative 3D printing (C3DP) is an emerging technology that holds the promise to mitigate both of these issues by having a swarm of printhead-carrying mobile robots working together to finish a single print job cooperatively. In our previous work, we have developed a chunk-based printing strategy to enable the cooperative 3D printing with two fused deposition modeling (FDM) mobile 3D printers, which allows each of them to print one chunk at a time without interfering with the other and the printed part. In this paper, we present a novel method in discretizing the continuous 3D printing process, where the desired part is discretized into chunks, resulting in multi-stage 3D printing process. In addition, the key contribution of this study is the first working scaling strategy for cooperative 3D printing based on simple heuristics, called scalable parallel arrays of robots for 3DP (SPAR3), which enables many mobile 3D printers to work together to reduce the total printing time for large prints. In order to evaluate the performance of the printing strategy, a framework is developed based on directed dependency tree (DDT), which provides a mathematical and graphical description of dependency relationships and sequence of printing tasks. The graph-based framework can be used to estimate the total print time for a given print strategy. Along with the time evaluation metric, the developed framework provides us with a mathematical representation of geometric constraints that are temporospatially dynamic and need to be satisfied in order to achieve collision-free printing for any C3DP strategy. The DDT-based evaluation framework is then used to evaluate the proposed SPAR3 strategy. The results validate the SPAR3 as a collision-free strategy that can significantly shorten the printing time (about 11 times faster with 16 robots for the demonstrated examples) in comparison with the traditional 3D printing with single printhead.more » « less
-
more » « less
Abstract Microneedle arrays show many advantages in drug delivery applications due to their convenience and reduced risk of infection. Compared to other microscale manufacturing methods, 3D printing easily overcomes challenges in the fabrication of microneedles with complex geometric shapes and multifunctional performance. However, due to material characteristics and limitations on printing capability, there are still bottlenecks to overcome for 3D printed microneedles to achieve the mechanical performance needed for various clinical applications. The hierarchical structures in limpet teeth, which are extraordinarily strong, result from aligned fibers of mineralized tissue and protein‐based polymer reinforced frameworks. These structures provide design inspiration for mechanically reinforced biomedical microneedles. Here, a bioinspired microneedle array is fabricated using magnetic field‐assisted 3D printing (MF‐3DP). Micro‐bundles of aligned iron oxide nanoparticles (aIOs) are encapsulated by polymer matrix during the printing process. A bioinspired 3D‐printed painless microneedle array is fabricated, and suitability of this microneedle patch for drug delivery during long‐term wear is demonstrated. The results reported here provide insights into how the geometrical morphology of microneedles can be optimized for the painless drug delivery in clinical trials.
-
more » « less
Abstract Rapid pressure swing adsorption (RPSA) is a gas separation technology used in the small‐scale oxygen concentrator devices. These devices are commonly used to produce high purity (~90%) oxygen from air for oxygen rehabilitation therapy, but can also produce a much wider range of oxygen purities for other applications. RPSA is a complex, cyclic, nonlinear switched logic process resulting from the coupling of gas adsorption, heat transfer, flow reversal effects, and process logic switches. For RPSA devices to operate satisfactorily, feedback control is critical but challenging due to their inherent complexity. In this article, we present a piecewise linear model predictive control framework for operation and control of a single‐bed RPSA system. A set of coupled, nonlinear partial differential equations with flow switching conditions is used as a plant model for the RPSA process. Subspace system identification with pseudo‐random binary sequence signals applied to this plant model at multiple operating points is used to generate a family of piecewise linear models for use in the model predictive controller algorithm. Detailed descriptions of the RPSA plant model, the multiple linear model identification procedure, the controller formulation and model switching logic are presented. The closed‐loop system is evaluated in simulation using several realistic set point tracking and disturbance rejection cases.
