skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Over One Million DNA and Protein Events Through Ultra‐Stable Chemically‐Tuned Solid‐State Nanopores
Abstract Stability, long lifetime, resilience against clogging, low noise, and low cost are five critical cornerstones of solid‐state nanopore technology. Here, a fabrication protocol is described wherein >1 million events are obtained from a single solid‐state nanopore with both DNA and protein at the highest available lowpass filter (LPF, 100 kHz) of the Axopatch 200B–the highest event count mentioned in literature. Moreover, a total of ≈8.1 million events are reported in this work encompassing the two analyte classes. With the 100 kHz LPF, the temporally attenuated population is negligible while with the more ubiquitous 10 kHz, ≈91% of the events are attenuated. With DNA experiments, the pores are operational for hours (typically >7 h) while the average pore growth is merely ≈0.16 ± 0.1 nm h −1 . The current noise is exceptionally stable with traces typically showing <10 pA h −1 increase in noise. Furthermore, a real‐time method to clean and revive pores clogged with analyte with the added benefit of minimal pore growth during cleaning (< 5% of the original diameter) is showcased. The enormity of the data collected herein presents a significant advancement to solid‐state pore performance and will be useful for future ventures such as machine learning where large amounts of pristine data are a prerequisite.  more » « less
Award ID(s):
2022374
PAR ID:
10443615
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Small
Volume:
19
Issue:
29
ISSN:
1613-6810
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, 2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS))
    null (Ed.)
    Solid-state nanopore sensors have broad applications from single-molecule biosensing to diagnostics and sequencing. Prevalent nanopore sensors are fabricated on silicon (Si) substrates through micromachining, however, the high capacitive noise resulting from Si conductivity has seriously limited both their sensing accuracy and recording speed. A new approach is proposed here for forming nanopore membranes on insulating sapphire wafers by anisotropic wet etching of sapphire through micro-patterned triangular masks. Reproducible formation of small membranes with an average dimension of ~10 μm are demonstrated. For validation, a sapphire-supported (SaS) nanopore chip, with a 100 times larger membrane area than silicon-supported (SiS) nanopore, showed 130 times smaller capacitance (10 pF) and ~2.5 times smaller rootmean-square (RMS) noise current (~20 pA over 100 kHz bandwidth). Tested with 1k bp double-stranded DNA, the SaS nanopore enabled sensing at microsecond speed with a signal-to-noise ratio of 21, compared to 11 from a SiS nanopore. This SaS nanopore presents a manufacturable platform feasible for biosensing as well as a wide variety of MEMS applications. 
    more » « less
  2. ; ; (, Applied Physics Letters)
    In developing solid-state nanopore sensors for single molecule detection, comprehensive evaluation of the nanopore quality is important. Existing studies typically rely on comparing the noise root mean square or power spectrum density values. Nanopores exhibiting lower noise values are generally considered superior. This evaluation is valid when the single molecule signal remains consistent. However, the signal can vary, as it is strongly related to the solid-state nanopore size, which is hard to control during fabrication consistently. This work emphasized the need to report the baseline current for evaluating solid-state nanopore sensors. The baseline current offers insight into several experimental conditions, particularly the nanopore size. Our experiments show that a nanopore sensor with more noise is not necessarily worse when considering the signal-to-noise ratio (SNR), particularly when the pore size is smaller. Our findings suggest that relying only on noise comparisons can lead to inaccurate evaluations of solid-state nanopore sensors, considering the inherent variability in fabrication and testing setups among labs and measurements. We propose that future studies should include reporting baseline current and sensing conditions. Additionally, using SNR as a primary evaluation tool for nanopore sensors could provide a more comprehensive understanding of their performance. 
    more » « less
  3. ; ; ; ; ; ; (, Chemistry of Materials)
    Bi2Te3 is a well-known thermoelectric material that was first investigated in the 1960s, optimized over decades, and is now one of the highest performing room-temperature thermoelectric materials to-date. Herein, we report on the colloidal synthesis, growth mechanism, and thermoelectric properties of Bi2Te3 nanoplates with a single nanopore in the center. Analysis of the reaction products during the colloidal synthesis reveals that the reaction progresses via a two-step nucleation and epitaxial growth: first of elemental Te nanorods and then the binary Bi2Te3 nanoplate growth. The rates of epitaxial growth can be controlled during the reaction, thus allowing the formation of a single nanopore in the center of the Bi2Te3 nanoplates. The size of the nanopore can be controlled by changing the pH of the reaction solution, where larger pores with diameter of similar to 50 nm are formed at higher pH and smaller pores with diameter of similar to 16 nm are formed at lower pH. We propose that the formation of the single nanopore is mediated by the Kirkendall effect and thus the reaction conditions allow for the selective control over pore size. Nanoplates have well-defined hexagonal facets as seen in the scanning and transmission electron microscopy images. The single nanopores have a thin amorphous layer at the edge, revealed by transmission electron microscopy. Thermoelectric properties of the pristine and single-nanopore Bi2Te3 nanoplates were measured in the parallel and perpendicular directions. These properties reveal strong anisotropy with a significant reduction to thermal conductivity and increased electrical resistivity in the perpendicular direction due to the higher number of nanoplate and nanopore interfaces. Furthermore, Bi2Te3 nanoplates with a single nanopore exhibit ultralow lattice thermal conductivity values, reaching similar to 0.21 Wm(-1)K(-1) in the perpendicular direction. The lattice thermal conductivity was found to be systematically lowered with pore size, allowing for the realization of a thermoelectric figure of merit, zT of 0.75 at 425 K for the largest pore size. 
    more » « less
  4. ; ; ; ; ; ; (, Proceedings of the National Academy of Sciences)
    null (Ed.)
    Many small proteins move across cellular compartments through narrow pores. In order to thread a protein through a constriction, free energy must be overcome to either deform or completely unfold the protein. In principle, the diameter of the pore, along with the effective driving force for unfolding the protein, as well as its barrier to translocation, should be critical factors that govern whether the process proceeds via squeezing, unfolding/threading, or both. To probe this for a well-established protein system, we studied the electric-field–driven translocation behavior of cytochrome c (cyt c ) through ultrathin silicon nitride (SiN x ) solid-state nanopores of diameters ranging from 1.5 to 5.5 nm. For a 2.5-nm-diameter pore, we find that, in a threshold electric-field regime of ∼30 to 100 MV/m, cyt c is able to squeeze through the pore. As electric fields inside the pore are increased, the unfolded state of cyt c is thermodynamically stabilized, facilitating its translocation. In contrast, for 1.5- and 2.0-nm-diameter pores, translocation occurs only by threading of the fully unfolded protein after it transitions through a higher energy unfolding intermediate state at the mouth of the pore. The relative energies between the metastable, intermediate, and unfolded protein states are extracted using a simple thermodynamic model that is dictated by the relatively slow (∼ms) protein translocation times for passing through the nanopore. These experiments map the various modes of protein translocation through a constriction, which opens avenues for exploring protein folding structures, internal contacts, and electric-field–induced deformability. 
    more » « less
  5. ; ; ; ; ; ; ; (, ELECTROPHORESIS)
    ABSTRACT Detection of ultra‐short peptides is one of the critical steps toward deeper understanding of proteins and the sequencing of amino acids using solid‐state nanopores. The ability of solid‐state nanopores to detect these ultra‐short peptides can help us reveal their hydrodynamic state under different conditions like the concentrations and the external voltage, which may further guide the future development in this field for deeper investigation and possible improvement. In this study, we fabricate SixNynanopores by CDB with various pore sizes and use them to detect ultra‐short peptides comprised of five different amino acids. The peptide translocation events are extracted under various external voltages. Optimal experimental conditions such as the concentration of electrolytes and analytes, and the range of external voltage are investigated and compared. The statistical results based on volume exclusion analysis indicate that a significant portion of peptides exist in aggregation form. Due to the limitations of SixNynanopores such as the thickness and the noise, most of the single peptide signals are masked under the baseline noise. In addition, the results show that peptide–pore interactions are dependent upon the diameter of the nanopore. Higher voltage may also influence the degree of peptide aggregations. This study serves to further comprehend the physical and chemical properties of peptides, find possible ways to improve the performance of solid‐state nanopores in the area of protein and peptide detections, and indicate the potential improvements in solid‐state nanopore‐based peptide sequencing. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email