Debris flows are powered by sediment supplied from steep hillslopes where soils are often patchy and interrupted by bare‐bedrock cliffs. The role of patchy soils and cliffs in supplying sediment to channels remains unclear, particularly surrounding wildfire disturbances that heighten debris‐flow hazards by increasing sediment supply to channels. Here, we examine how variation in soil cover on hillslopes affects sediment sizes in channels surrounding the 2020 El Dorado wildfire, which burned debris‐flow prone slopes in the San Bernardino Mountains, California. We focus on six headwater catchments (<0.1 km2) where hillslope sources ranged from a continuous soil mantle to 95% bare‐bedrock cliffs. At each site, we measured sediment grain size distributions at the same channel locations before and immediately following the wildfire. We compared results to a mixing model that accounts for three distinct hillslope sediment sources distinguished by local slope thresholds. We find that channel sediment in fully soil‐mantled catchments reflects hillslope soils (
Sediment grain size links sediment production, weathering, and fining from fractured bedrock on hillslopes to river incision and landscape relief. Yet models of sediment grain size delivery to rivers remain unconstrained due to a scarcity of field data. We analyzed how bedrock fracture spacing and hillslope weathering influence landscape‐scale patterns in surface sediment grain size across gradients of erosion rate and hillslope bedrock exposure in the San Gabriel Mountains (SGM) and northern San Jacinto Mountains (NSJM) of California, USA. Using ground‐based structure‐from‐motion photogrammetry models of 50 bedrock cliffs, we showed that fracture density is ~5 times higher in the SGM than the NSJM. 274 point‐count‐surveys of surface sediment grain size measured in the field and from imagery show a drainage area control on sediment grain size, with systematic downslope coarsening on hillslopes and in headwater‐colluvial channels transitioning to downstream fining in fluvial channels. In contrast to prior work and predictions from a hillslope weathering model, grain size does not increase smoothly with increasing erosion rate. For soil‐mantled landscapes, sediment grain size increases with increasing erosion rates; however, once bare bedrock emerges on hillslopes, sediment grain size in both the NSJM and SGM becomes insensitive to further increases in erosion rate and hillslope bedrock exposure, and instead reflects fracture spacing contrasts between the NSJM and SGM. We interpret this threshold behavior to emerge in steep landscapes due to efficient delivery of coarse sediment from bedrock hillslopes to channels and the relative immobility of coarse sediment in fluvial channels.
more » « less- NSF-PAR ID:
- 10449254
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Earth Surface
- Volume:
- 125
- Issue:
- 10
- ISSN:
- 2169-9003
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract D 50 = 0.1–0.2 cm) both before and after the wildfire. In steeper catchments with cliffs, channel sediment is consistently coarse prior to fire (D 50 = 6–32 cm) and reflects bedrock fracture spacing, despite cliffs representing anywhere from 5% to 95% of the sediment source area. Following the fire, channel sediment size reduces most (5‐ to 20‐fold) in catchments where hillslope sources are predominantly soil covered but with patches of cliffs. The abrupt fining of channel sediment is thought to facilitate postfire debris‐flow initiation, and our results imply that this effect is greatest where bare‐bedrock cliffs are present but not dominant. A patchwork of bare‐bedrock cliffs is common in steeplands where hillslopes respond to channel incision by landsliding. We show how local slope thresholds applied to such terrain aid in estimating sediment supply conditions before two destructive debris flows that eventually nucleated in these study catchments in 2022. -
more » « less
Abstract Steep channel networks commonly show a transition from constant‐gradient colluvial channels associated with debris flow activity to concave‐up fluvial channels downstream. The trade‐off between debris flow and fluvial erosion in steep channels remains unclear, which obscures connections among topography, tectonics, and climate in steep landscapes. Here, we analyze steep debris‐flow‐prone channels across the western United States and observe: (1) similar maximum channel gradients across a range of catchment erosion rates and geologic settings; and (2) lengthening colluvial channels with coarsening sediment cover. Following this compilation, we hypothesize that steep channel gradients are controlled by two competing thresholds of motion for bed‐sediment cover: bed failure by mass‐wasting and fluvial entrainment. We use downstream patterns in discharge, channel geometry, and sediment size to calculate discharges needed to mobilize sediment cover by both mechanisms across channels in the San Gabriel Mountains (SGM) and northern San Jacinto Mountains (NSJM) in southern California. Across steep colluvial channels in both landscapes, decadal discharges are below fluvial entrainment thresholds but above mass‐wasting entrainment thresholds for (median) sediment sizes, consistent with recent debris flows captured by repeat imagery. Colluvial channel gradient is similar despite > 3× contrasts in surface sediment grain size. In concave‐up fluvial channels downstream, decadal discharges exceed fluvial entrainment thresholds, and mass‐wasting is not predicted on lower gradients. In both landscapes, fluvial channels steepen downstream compared to gradients needed to mobilize sediment cover, which we interpret to reflect downstream increases in sediment flux. Coarser sediment supply in the NSJM than the SGM increases fluvial entrainment thresholds, which increases total channel relief in the NSJM by (1) lengthening colluvial channels shaped by debris flows and (2) increasing fluvial channel gradients. Our compilation and downstream analysis show how differing sensitivity of fluvial and debris flow processes to sediment grain size impacts the relative relief of colluvial and fluvial regimes in headwater channel networks.
-
more » « less
Abstract The size distributions of sediment delivered from hillslopes to rivers profoundly influence river morphodynamics, including river incision into bedrock and the quality of aquatic habitat. Yet little is known about the factors that influence size distributions of sediment produced by weathering on hillslopes. We present results of a field study of hillslope sediment size distributions at Inyo Creek, a steep catchment in granitic bedrock of the Sierra Nevada, USA. Particles sampled near the base of hillslopes, adjacent to the trunk stream, show a pronounced decrease in sediment size with decreasing sample elevation across all but the coarsest size classes. Measured size distributions become increasingly bimodal with decreasing elevation, exhibiting a coarse, bouldery mode that does not change with elevation and a more abundant finer mode that shifts from cobbles at the highest elevations to gravel at mid elevations and finally to sand at low elevations. We interpret these altitudinal variations in hillslope sediment size to reflect changes in physical, chemical, and biological weathering that can be explained by the catchment's strong altitudinal gradients in topography, climate, and vegetation cover. Because elevation and travel distance to the outlet are closely coupled, the altitudinal trends in sediment size produce a systematic decrease in sediment size along hillslopes parallel to the trunk stream. We refer to this phenomenon as ‘downvalley fining.’ Forward modeling shows that downvalley fining of hillslope sediment is necessary for downstream fining of the long‐term average flux of coarse sediment in mountain landscapes where hillslopes and channels are coupled and long‐term net sediment deposition is negligible. The model also shows that abrasion plays a secondary role in downstream fining of coarse sediment flux but plays a dominant role in partitioning between the bedload and suspended load. Patterns observed at Inyo Creek may be widespread in mountain ranges around the world. © 2020 John Wiley & Sons Ltd
-
more » « less
Abstract Steep landscapes evolve largely by debris flows, in addition to fluvial and hillslope processes. Abundant field observations document that debris flows incise valley bottoms and transport substantial sediment volumes, yet their contributions to steepland morphology remain uncertain. This has, in turn, limited the development of debris‐flow incision rate formulations that produce morphology consistent with natural landscapes. In many landscapes, including the San Gabriel Mountains (SGM), California, steady‐state fluvial channel longitudinal profiles are concave‐up and exhibit a power‐law relationship between channel slope and drainage area. At low drainage areas, however, valley slopes become nearly constant. These topographic forms result in a characteristically curved slope‐area signature in log‐log space. Here, we use a one‐dimensional landform evolution model that incorporates debris‐flow erosion to reproduce the relationship between this curved slope‐area signature and erosion rate in the SGM. Topographic analysis indicates that the drainage area at which steepland valleys transition to fluvial channels correlates with measured erosion rates in the SGM, and our model results reproduce these relationships. Further, the model only produces realistic valley profiles when parameters that dictate the relationship between debris‐flow erosion, valley‐bottom slope, and debris‐flow depth are within a narrow range. This result helps place constraints on the mathematical form of a debris‐flow incision law. Finally, modeled fluvial incision outpaces debris‐flow erosion at drainage areas less than those at which valleys morphologically transition from near‐invariant slopes to concave profiles. This result emphasizes the critical role of debris‐flow incision for setting steepland form, even as fluvial incision becomes the dominant incisional process.
-
more » « less
Abstract The connection between topography and erosion rate is central to understanding landscape evolution and sediment hazards. However, investigation of this relationship in steep landscapes has been limited due to expectations of: (a) decoupling between erosion rate and “threshold” hillslope morphology; and (b) bias in detrital cosmogenic nuclide erosion rates due to deep‐seated landslides. Here we compile 120 new and published10Be erosion rates from catchments in the San Gabriel Mountains, California, and show that hillslope morphology and erosion rate are coupled for slopes approaching 50° due to progressive exposure of bare bedrock with increasing erosion rate. We find no evidence for drainage area dependence in10Be erosion rates in catchments as small as 0.09 km2, and we show that landslide deposits influence erosion rate estimates mainly by adding scatter. Our results highlight the potential and importance of sampling small catchments to better understand steep hillslope processes.
