More Like this

1. A Seismic Tomography, Gravity, and Flexure Study of the Crust and Upper Mantle Structure of the Emperor Seamounts at Jimmu Guyot

   https://doi.org/10.1029/2021JB023241  

   Xu, C. ; Dunn, R. A. ; Watts, A. B. ; Shillington, D. J. ; Grevemeyer, I. ; Gómez de la Peña, L. ; Boston, B. B. ( June 2022 , Journal of Geophysical Research: Solid Earth)

   The intraplate Hawaiian‐Emperor Seamount Chain has long been considered a hotspot track generated by the motion of the Pacific plate over a deep mantle plume, and an ideal feature therefore for studies of volcanic structure, magma supply, plume‐crust interaction, flexural loading, and upper mantle rheology. Despite their importance as a major component of the chain, the Emperor Seamounts have been relatively little studied. In this paper, we present the results of an active‐source wide‐angle reflection and refraction experiment conducted along an ocean‐bottom‐seismograph (OBS) line oriented perpendicular to the seamount chain, crossing Jimmu guyot. The tomographicPwave velocity model, using ∼20,000 travel times from 26 OBSs, suggests that there is a high‐velocity (>6.0 km/s) intrusive core within the edifice, and the extrusive‐to‐intrusive ratio is estimated to be ∼2.5, indicating that Jimmu was built mainly by extrusive processes. The total volume for magmatic material above the top of the oceanic crust is ∼5.3 × 10⁴ km³, and the related volume flux is ∼0.96 m³/s during the formation of Jimmu. Under volcanic loading, the ∼5.3‐km‐thick oceanic crust is depressed by ∼3.8 km over a broad region. Using the standard relationships between Vpand density, the velocity model is verified by gravity modeling, and plate flexure modeling indicates an effective elastic thickness (T_e) of ∼14 km. Finally, we find no evidence for large‐scale magmatic underplating beneath the pre‐existing crust.

    

   more » « less
2. A Seismic Tomography, Gravity, and Flexure Study of the Crust and Upper Mantle Structure Across the Hawaiian Ridge: 2. Ka'ena

   https://doi.org/10.1029/2023JB028118  

   Dunn, R. A. ; Watts, A. B. ; Xu, C. ; Shillington, D. J. ( February 2024 , Journal of Geophysical Research: Solid Earth)

   The Hawaiian Ridge, a classic intraplate volcanic chain in the Central Pacific Ocean, has long attracted researchers due to its origin, eruption patterns, and impact on lithospheric deformation. Thought to arise from pressure‐release melting within a mantle plume, its mass‐induced deformation of Earth's surface depends on load distribution and lithospheric properties, including elastic thickness (T_e). To investigate these features, a marine geophysical campaign was carried out across the Hawaiian Ridge in 2018. Westward of the island of O'ahu, a seismic tomographic image, validated by gravity data, reveals a large mass of volcanic material emplaced on the oceanic crust, flanked by an apron of volcaniclastic material filling the moat created by plate flexure. The ridge adds ∼7 km of material to pre‐existing ∼6‐km‐thick oceanic crust. A high‐velocity and high‐density core resides within the volcanic edifice, draped by alternating lava flows and mass wasting material. Beneath the edifice, upper mantle velocities are slightly higher than that of the surrounding mantle, and there is no evidence of extensive magmatic underplating of the crust. There is ∼3.5 km of downward deflection of the sediment‐crust and crust‐mantle boundaries due to flexure in response to the volcanic load. At Ka'ena Ridge, the volcanic edifice's height and cross‐sectional area are no more than half as large as those determined at Hawai'i Island. Together, these studies confirm that volcanic loads to the west of Hawai'i are largely compensated by flexure. Comparisons to the Emperor Seamount Chain confirm the Hawaiian Ridge's relatively stronger lithospheric rigidity.

    

   more » « less
3. Active ocean–continent transform margins: seismic investigation of the Cayman Trough-Swan Island ridge-transform intersection

   https://doi.org/10.1093/gji/ggac019  

   Peirce, C. ; Grevemeyer, I. ; Hayman, N. W. ; Van Avendonk, H. J. A. ( January 2022 , Geophysical Journal International)

   The southern boundary of the Cayman Trough in the Caribbean is marked by the Swan Islands transform fault (SITF), which also represents the ocean–continent transition of the Honduras continental margin. This is one of the few places globally where a transform continental margin is currently active. The CAYSEIS experiment acquired an ∼165-km-long seismic refraction and gravity profile (P01) running across this transform margin, and along the ridge-axis of the Mid-Cayman Spreading Centre (MCSC) to the north. This profile reveals not only the crustal structure of an actively evolving transform continental margin, that juxtaposes Mesozoic-age continental crust to the south against zero-age ultraslow spread oceanic crust to the north, but also the nature of the crust and uppermost mantle beneath the ridge-transform intersection (RTI). The traveltimes of arrivals recorded by ocean-bottom seismographs (OBSs) deployed along-profile have been inverse and forward modelled, in combination with gravity modelling, to reveal an ∼25-km-thick continental crust that has been continuously thinned over a distance of ∼65 km to ∼10 km adjacent to the SITF, where it is juxtaposed against ∼3–4-km-thick oceanic crust. This thinning is primarily accommodated within the lower crust. Since Moho reflections are only sparsely observed, and, even then, only by a few OBSs located on the continental margin, the 7.5 km s–1 velocity contour is used as a proxy to locate the crust–mantle boundary along-profile. Along the MCSC, the crust–mantle boundary appears to be a transition zone, at least at the seismic wavelengths used for CAYSEIS data acquisition. Although the traveltime inversion only directly constrains the upper crust at the SITF, gravity modelling suggests that it is underlain by a higher density (>3000 kg m–3) region spanning the width (∼15 km) of its bathymetric expression, that may reflect a broad region of metasomatism, mantle hydration or melt-depleted lithospheric mantle. At the MCSC ridge-axis to the north, the oceanic crust appears to be forming in zones, where each zone is defined by the volume of its magma supply. The ridge tip adjacent to the SITF is currently in a magma rich phase of accretion. However, there is no evidence for melt leakage into the transform zone. The width and crustal structure of the SITF suggests its motion is currently predominantly orthogonal to spreading. Comparison to CAYSEIS Profile P04, located to the west and running across-margin and through 10 Ma MCSC oceanic crust, suggests that, at about this time, motion along the SITF had a left-lateral transtensional component, that accounts for its apparently broad seabed appearance westwards.

    

   more » « less
4. Recycled Components in Mantle Plumes Deduced From Variations in Halogens (Cl, Br, and I), Trace Elements, and 3 He/ 4 He Along the Hawaiian‐Emperor Seamount Chain

   https://doi.org/10.1029/2018GC007959  

   Broadley, Michael W. ; Sumino, Hirochika ; Graham, David W. ; Burgess, Ray ; Ballentine, Chris J. ( January 2019 , Geochemistry, Geophysics, Geosystems)

   Halogens are primarily located within surface reservoirs of the Earth; as such they have proven to be effective tracers for the identification of subducted volatiles within the mantle. Subducting lithologies exhibit a wide variety of halogen compositions, yet the mantle maintains a fairly uniform signature, suggesting halogens may be homogenized during subduction to the mantle or during eruption. Here we present halogen (Cl, Br, and I), K, noble gas, and major and trace element data on olivines from three seamounts along the Hawaiian‐Emperor seamount chain to determine if the deep mantle source has retained evidence of halogen heterogeneities introduced through subduction. High Ni contents indicate that the Hawaiian‐Emperor mantle source contains a recycled oceanic crust component in the form of pyroxenite, which increases from the 46% in the oldest (Detroit) to 70% in the younger seamount (Koko). Detroit seamount retains mid‐ocean ridge basalts (MORB)‐like Br/Cl and I/Cl, while the Br/Cl and I/Cl of Suiko and Koko seamounts are higher than MORB and similar to altered oceanic crust and dehydrated serpentinite. Helium isotopes show a similar evolution, from MORB‐like values at Detroit seamount toward higher values at Suiko and Koko seamounts. The correlation between pyroxenite contributions, Br/Cl, I/Cl, and³He/⁴He indicates that subducted material has been incorporated into the primordial undegassed Hawaiian mantle plume source. The identification of recycled oceanic crustal signatures in both the trace elements and halogens indicates that subduction and dehydration of altered oceanic crust may exert control on the cycling of volatile elements to the deep mantle.

    

   more » « less
5. The multiple depleted mantle components in the Hawaiian-Emperor chain

   https://doi.org/10.1016/j.chemgeo.2019.119324  

   Harrison, L ; Weis, D ; Garcia, M.O. ( January 2020 , Chemical geology)

   null (Ed.)

   Oceanic island basalts are targeted for geochemical study because they provide a direct window into mantle composition and a wealth of information on the dynamics and timescales associated with Earth mixing. Previous studies mainly focused on the shield volcanic stage of oceanic islands and the more fusible, enriched mantle components that are easily distinguished in those basalts. Mantle depleted compositions are typically more difficult to resolve unless large amounts of this material participated in mantle melting (e.g., mid-ocean ridges), or unique processes allow for their compositions to be erupted undiluted, such as very small degrees of melting of a source with minimal fusible enriched components (e.g., rejuvenated basalts) or as xenoliths (e.g., abyssal peridotites). Mantle depleted components, defined here as material with low time-integrated Rb/Sr (low 87Sr/86Sr) and high time-integrated Sm/Nd and Lu/Hf ratios (high 143Nd/144Nd and 176Hf/177Hf) relative to primitive mantle, derive from a potentially very large volume reservoir (up to 80% of the mantle), and therefore need adequate characterization in order estimate the composition of the Earth and mantle-derived melts. This review focuses on mantle depleted compositions in oceanic island basalts using the Hawaiian-Emperor chain as a case study. The Hawaiian-Emperor chain is the ∼6000 km long geological record of the deeply sourced Hawaiian mantle plume, active for>81 Myr. Hawaiian volcanism evolves through four volcanic stages as a volcano traverses the Hawaiian plume: alkalic preshield, tholeiitic shield (80–90% volcano volume), alkalic postshield (∼1%), and silica undersaturated rejuvenated (< 0.1%). We report Pb-Sr-Nd-Hf isotope compositions and trace element concentrations of three rejuvenated Northwest Hawaiian Ridge basalts and compare them to an exhaustive compiled dataset of basalts from the Hawaiian Islands to the Emperor Seamounts. The Northwest Hawaiian Ridge (NWHR) includes 51 volcanoes spanning ∼42 m.y. between the bend in the Hawaiian-Emperor chain and the Hawaiian Islands where there is no high-precision isotopic data published on the rejuvenated-stage over ∼47% of the chain. NWHR and Hawaiian Island rejuvenated basalts are geochemically similar, indicating a consistent source for rejuvenated volcanism over ∼12.5 million years. In contrast, shield-stage basalts from the oldest Emperor Seamounts are more depleted in isotopic composition (i.e., higher 176Hf/177Hf, and 143Nd/144Nd with lower 87Sr/86Sr and 208Pb*/206Pb*) and trace element concentrations (i.e., much lower concentrations of highly incompatible elements) than all other depleted Hawaiian basalts younger than the bend, including NWHR rejuvenated basalts. The strongly depleted source for the oldest Emperor Seamounts (> 70 Ma) was likely related to interaction with the Kula-Pacific-Izanagi mid-ocean ridge spreading system active near the Hawaiian plume in the Late Cretaceous. In contrast, the incompatible trace element ratios of NWHR rejuvenated basalts require a distinct source in the Hawaiian mantle plume that was imprinted by ancient (> 1 Ga) partial melting, likely ancient recycled oceanic lithosphere. This review of the geochemistry of Hawaiian depleted components documents the need for the sampling of multiple distinctive depleted compositions, each preferentially melted during specific periods of Hawaiian plume activity. This suggests that the composition of depleted components can evolve during the lifetime of the mantle plume, as observed for enriched components in the Hawaiian mantle plume. Changes in the composition of depleted components are dominantly controlled by the upper mantle tectonic configurations at the time of eruption (i.e., proximity to a mid-ocean ridge), as this effect overwhelms the signal imparted by potentially sampling different lower mantle components through time. 

   more » « less