Co‐precipitation is generally refers to the co‐precipitation of two solids and is widely used to prepare active‐loaded nanoparticles. Here, it is demonstrated that liquid and solid can precipitate simultaneously to produce hierarchical core–shell nanocapsules that encapsulate an oil core in a polymer shell. During the co‐precipitation process, the polymer preferentially deposits at the oil/water interface, wetting both the oil and water phases; the behavior is determined by the spreading coefficients and driven by the energy minimization. The technique is applicable to directly encapsulate various oil actives and avoid the use of toxic solvent or surfactant during the preparation process. The obtained core–shell nanocapsules harness the advantage of biocompatibility, precise control over the shell thickness, high loading capacity, high encapsulation efficiency, good dispersity in water, and improved stability against oxidation. The applications of the nanocapsules as delivery vehicles are demonstrated by the excellent performances of natural colorant and anti‐cancer drug‐loaded nanocapsules. The core–shell nanocapsules with a controlled hierarchical structure are, therefore, ideal carriers for practical applications in food, cosmetics, and drug delivery.
Magnetron sputtering inert gas condensation is used to produce core/shell Co/ZnO nanoparticles. Selective oxidation to form the core/shell nanoparticles is accomplished both during nanoparticle formation (“in situ”) and with exposure to ambient conditions (“ex situ”). The ZnO formed in situ shows single‐crystalline nature with specific orientation relationships with the Co core, while the ZnO formed ex situ is polycrystalline. Conductive atomic force microscopy is utilized to measure the electrical behavior of individual nanoparticles, and both types of core/shell nanoparticles display classic bipolar resistive switching behavior. These results highlight potential application of these nanoparticles as promising next generation nonvolatile memories and neuromorphic computational devices.
more » « less- PAR ID:
- 10449278
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Electronic Materials
- Volume:
- 6
- Issue:
- 10
- ISSN:
- 2199-160X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Dye-doped nanoparticles have been investigated as bright, luminescent labels for super-resolution microscopy via localization methods. One key factor in super-resolution is the size of the luminescent label, which in some cases results in a frame shift between the label target and the label itself. Ag@SiO 2 core–shell nanoparticles, doped with organic fluorophores, have shown promise as super-resolution labels. One key aspect of these nanoparticles is that they blink under certain conditions, allowing super-resolution localization with a single excitation source in aqueous solution. In this work, we investigated the effects of both the Ag core and the silica (SiO 2 ) shell on the self-blinking properties of these nanoparticles. Both core size and shell thickness were manipulated by altering the reaction time to determine core and shell effects on photoblinking. Size and shell thickness were investigated individually under both dry and hydrated conditions and were then doped with a 1 mM solution of Rhodamine 110 for analysis. We observed that the cores themselves are weakly luminescent and are responsible for the blinking observed in the fully-synthesized metal-enhanced fluorescence nanoparticles. There was no statistically significant difference in photoblinking behavior—both intensity and duty cycle—with decreasing core size. This observation was used to synthesize smaller nanoparticles ranging from approximately 93 nm to 110 nm as measured using dynamic light scattering. The blinking particles were localized via super-resolution microscopy and show single particle self-blinking behavior. As the core size did not impact blinking performance or intensity, the nanoparticles can instead be tuned for optimal size without sacrificing luminescence properties.more » « less
-
more » « less
Abstract The use of transmission electron microscopy (TEM) to observe real-time structural and compositional changes has proven to be a valuable tool for understanding the dynamic behavior of nanomaterials. However, identifying the nanoparticles of interest typically require an obvious change in position, size, or structure, as compositional changes may not be noticeable during the experiment. Oxidation or reduction can often result in subtle volume changes only, so elucidating mechanisms in real-time requires atomic-scale resolution or
in-situ electron energy loss spectroscopy, which may not be widely accessible. Here, by monitoring the evolution of diffraction contrast, we can observe both structural and compositional changes in iron oxide nanoparticles, specifically the oxidation from a wüstite-magnetite (FeO@Fe3O4) core– shell nanoparticle to single crystalline magnetite, Fe3O4nanoparticle. Thein-situ TEM images reveal a distinctive light and dark contrast known as the ‘Ashby-Brown contrast’, which is a result of coherent strain across the core– shell interface. As the nanoparticles fully oxidize to Fe3O4, the diffraction contrast evolves and then disappears completely, which is then confirmed by modeling and simulation of TEM images. This represents a new, simplified approach to tracking the oxidation or reduction mechanisms of nanoparticles usingin-situ TEM experiments. -
more » « less
Abstract Nanocatalysts with a Rh shell and Pd core (Rh‐on‐Pd) were synthesized. These Rh‐on‐Pd catalysts showed the highest selectivity for methane in the methanation of carbon dioxide by hydrogen among Rh, Pd and Rh‐on‐Pd bimetallic core–shell structures tested when the Rh shell became about two atom‐layers thick. In situ environmental transmission electron microscopy (ETEM) study was used to investigate the dynamic structural change of these Rh‐on‐Pd core–shell nanoparticles under hydrogen atmosphere at variable temperatures, showing the feasibility of controlling the surface compositions. Thickening of the Rh shell was observed by nano beam diffraction (NBD) at elevated temperatures during the sintering, resulting in the change of selectivity in methane formation over Rh‐on‐Pd catalysts. This selectivity became similar to that of Rh catalyst at high temperatures due to the disappearance of ligand effects for thick Rh shells. Density functional theory (DFT) calculations suggest CO dissociation on the (111) surface of monolayers or double layers of Rh on Pd structure is energetically favored over either Rh or Pd, showing the potential for producing hydrocarbons through hydrogenation of carbon dioxide.
-
In this study, we investigate the enhancement of exchange bias in core/shell/shell structures by synthesizing single inverted core/shell (Co-oxide/Co) and core/shell/shell (Co-oxide/Co/Co-oxide) nanostructures through a two-step reduction and oxidation method. We evaluate the magnetic properties of the structures and study the effect of shell thickness on the exchange bias by synthesizing various shell thicknesses of Co-oxide/Co/Co-oxide nanostructures. The extra exchange coupling formed at the shell–shell interface in the core/shell/shell structure leads to a remarkable increase in the coercivity and the strength of the exchange bias by three and four orders, respectively. The strongest exchange bias is achieved for the sample comprising the thinnest outer Co-oxide shell. Despite the general declining trend of the exchange bias with Co-oxide shell thickness, we also observe a nonmonotonic behavior in which the exchange bias oscillates slightly as the shell thickness increases. This phenomenon is ascribed to the dependence of the antiferromagnetic outer shell thickness variation at the expense of the simultaneous opposite variation in the ferromagnetic inner shell.more » « less
