Animal silks, consisting of pure protein components, offer an extraordinary combination of strength, elongation, and toughness, exceeding most engineered materials. The secret to this success is their unique nanoarchitectures formed through the hierarchical self‐assembly of silk proteins. This natural process contrasts the production of artificial silk materials, which usually are directly constructed as bulk structures from silk fibroin (SF) molecules. A variety of fabrication strategies to control nanostructures of silks or to create functional materials from silk nanoscale building blocks have been developed in the recent years. These emerging fabrication strategies offer an opportunity to tailor the structure of SF at the nanoscale and provide a promising route to produce structurally and functionally optimized silk nanomaterials. Herein, the critical roles of silk nanoarchitectures in property and function of natural silk fibers are reviewed and the strategies of utilization of these silk nanobuilding blocks are outlined. Further, the state‐of‐the‐art techniques to create silk nanoarchitectures and to generate silk‐based nanocomponents are summarized. An effective approach to constructing sophisticated silk functional nanocomposites with promising applications in regenerative medicine, drug delivery, and optical and electronic device designs is provided. Further, such insights suggest templates to consider for other material systems.
Controlled self‐assembly of bio‐sourced nanocolloids is of high importance for the development of sustainable and low‐cost functional materials but controlling nanocomposite fabrication with both satisfactory optical properties and composition remains challenging. Silk fibroin (SF) and cellulose nanocrystals (CNCs) have independently demonstrated their ability to produce high‐quality photonic materials, in part due to their low absorbance and their transparency in the visible range. While SF is able to replicate inverse structures by high‐resolution nano‐templating, CNCs can spontaneously assemble into cholesteric liquid crystalline structures that are retained upon solvent evaporation, yielding photonic films. In this work, the conditions of successful co‐assembly of regenerated SF, extracted from silkworm silk, with CNCs extracted from cotton, are investigated. Their co‐assembly is investigated for various relative concentration ratios and pH, combining polarized optical microscopy and spectroscopy, SEM, and other characterization techniques (XRD, ATR‐FTIR, TGA). The appearance of photonic properties is observed when CNC and SF are assembled at pH ≥ 4.15, highlighting the importance of suppressing attractive electrostatic interactions between the two species for an organized structure to emerge. Beyond its fundamental motivations for colloidal co‐assembly with structural proteins, this work is relevant to design sustainable optical materials compatible with food packaging coatings and edible coloring pigments.
more » « less- NSF-PAR ID:
- 10450976
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Sustainable Systems
- Volume:
- 5
- Issue:
- 6
- ISSN:
- 2366-7486
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
As the average life expectancy continues to increase, so does the need for resorbable materials designed to treat, augment, or replace components and functions of the body. Naturally occurring biopolymers such as silks are already attractive candidates due to natural abundance and high biocompatibility accompanied by physical properties which are easily modulated through blending with another polymer. In this paper, the authors report on the fabrication of biocomposite materials made from binary blends of Bombyx mori silk fibroin (SF) protein and renewably sourced low molecular weight nylon 610 and high molecular weight nylon 1010. Films were characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Results of this study demonstrated that enhanced structural and thermal properties were achievable in composite films SF-N610/N1010 due to their chemical similarity and the possible formation of hydrogen bonds between nylon and silk molecular chains. This study provides useful insight into the sustainable design of functional composite materials for biomedical and green technologies.more » « less
-
more » « less
Abstract Despite advances in directing the assembly of biomacromolecules into well-defined nanostructures, leveraging pathway complexity of molecular disorder to order transition while bridging materials fabrication from nano- to macroscale remains a challenge. Here, we present templated crystallization of structural proteins to nanofabricate hierarchically structured materials up to centimeter scale, using silk fibroin as an example. The process involves the use of ordered peptide supramolecular assemblies as templates to direct the folding and assembly of silk fibroin into nanofibrillar structures. Silk polymorphs can be engineered by varying the peptide seeds used. Modulation of the relative concentration between silk fibroin and peptide seeds, silk fibroin molecular weight and pH allows control over nanofibrils morphologies and mechanical properties. Finally, facile integration of the bottom-up templated crystallization with emerging top-down techniques enables the generation of macroscopic nanostructured materials with potential applications in information storage/encryption, surface functionalization, and printable three-dimensional constructs of customized architecture and controlled anisotropy.
-
In the last few decades, fiber reinforced composites have been established as the materials of choice for lightweight applications in a large spectrum of applications ranging from aerospace, defense, and marine industries to automotive products and consumer goods. With the growing shift to sustainable resources, natural fibers, especially plant fibers, received increased interest throughout the years. Among these natural fibers, silks stand out with low stiffness and a high failure strain, unlike conventional fibers such as carbon or glass. Although gaining traction as a natural alternative reinforcement, silk still has little to no commercial uses despite its higher performance. Besides its higher mechanical properties and lightweight, silk exhibits other attractive properties such as improved flame retardancy and biodegradability. To take advantage of these features, proper fiber/matrix adhesion must be achieved. Such silk/matrix bonding can be inferred from the silk/resin affinity during composite manufacturing. In this study, the affinity/wettability of several silk/resin systems were analyzed via static contact angles using imageJ software to determine candidates for silk reinforced composite laminates with better adhesion. To this end, a combination of four silk fibers and three resin systems were investigated. The investigated silk fibers were Ahimsa, Charmeuse, Habotai, and Tussah; and the resins included a vinyl ester (Hydrex) and two epoxies (INF114 and INR). For Tussah fibers, initial contact angles were consistently one of the lowest. However, these fibers exhibited a higher contact angle over time compared to the other silk fibers studied. Conversely, Ahimsa silk fibers showed the highest initial contact angle, then quickly dropped to com-plete wetting. Habotai fibers dropped towards complete wetting quickly, however, consistently slowed considerably shortly after. Charmeuse fibers performed similarly to Ahimsa fibers with Hydrex, however was considerably slower to wetting with the other resins. Among the investigated resins, Hydrex showed the best affinity to silk fibers with the majority of the lowest initial contact angles and the fastest to complete wetting. INF114 consistently receded at a slower, albeit steady, rate until reaching complete wetting apart from Tussah. INR showed the highest initial contact angles and never reached complete wetting after an hour for two of the four silks investigated. Therefore, the best silk/resin affinity was observed for the Ahimsa and Charmeuse silk fibers and the Hydrex vinyl ester resin. In future work, silk composites with these constituents would be investigated.more » « less
-
more » « less
Abstract Microencapsulation techniques represent a critical step in realizing highly controlled transport of functional materials in multiphase systems. The first demonstration of microcapsules prepared from minimally grafted silk ionomers (silk fibroin modified with cationic/anionic charge groups) are presented here. These tailored biomacromolecules have shown significantly increased biocompatibility over traditional polyelectrolytes and heavily grafted silk ionomers, but the low grafting density had previously limited attempts to fabricate stable microcapsules. In addition, the first microcapsules from polyethylene‐glycol‐grafted silk ionomers are fabricated and the corresponding impact on microcapsule behavior is demonstrated. The materials are shown to exhibit pH‐responsive properties, with the microcapsules demonstrating an approx. tenfold decrease in stiffness and an approx. threefold change in diffusion coefficient when moving from acidic to basic buffer. Finally, the effect of assembly conditions of the microcapsules are shown to play a large role in determining final properties, with microcapsules prepared in acidic buffers showing lower roughness, stiffness, and an inversion in transport behavior (i.e., permeability decreases at higher pH).
