Liquid crystal elastomers (LCEs) have attracted tremendous interest as actuators for soft robotics due to their mechanical and shape memory properties. However, LCE actuators typically respond to thermal stimulation through active Joule heating and passive cooling, which make them difficult to control. In this work, LCEs are combined with soft, stretchable thermoelectrics to create transducers capable of electrically controlled actuation, active cooling, and thermal‐to‐electrical energy conversion. The thermoelectric layers are composed of semiconductors embedded within a 3D printed elastomer matrix and wired together with eutectic gallium–indium (EGaIn) liquid metal interconnects. This layer is covered on both sides with LCE, which alternately heats and cools to achieve cyclical bending actuation in response to voltage‐controlled Peltier activation. Moreover, the thermoelectric layer can harvest energy from thermal gradients between the two LCE layers through the Seebeck effect, allowing for regenerative energy harvesting. As demonstrations, first, closed‐loop control of the transducer is performed to rapidly track a changing actuator position. Second, a soft robotic walker that is capable of walking toward a heat source and harvesting energy is introduced. Lastly, phototropic‐inspired autonomous deflection of the limbs toward a heat source is shown, demonstrating an additional method to increase energy recuperation efficiency for soft systems.
The programmable assembly of innervated LCE actuators (iLCEs) with prescribed contractile actuation, self‐sensing, and closed loop control via core–shell 3D printing is reported. This extrusion‐based direct ink writing method enables coaxial filamentary features composed of pure LM core surrounded by an LCE shell, whose director is aligned along the print path. Specifically, the thermal response of the iLCE fiber‐type actuators is programmed, measured, and modeled during Joule heating, including quantifying the concomitant changes in fiber length and resistance that arise during simultaneous heating and self‐sensing. Due to their reversible, high‐energy actuation and their resistive feedback, it is also demonstrated that iLCEs can be regulated with closed loop control even when perturbed with large bias loads. Finally, iLCE architectures capable of programmed, self‐sensing 3D shape change with closed loop control are fabricated.
more » « less- PAR ID:
- 10451068
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 33
- Issue:
- 27
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Coaxial‐Spun Hollow Liquid Crystal Elastomer Fiber as a Versatile Platform for Functional Composites
Abstract The design and engineering of liquid crystal elastomers (LCE) composites for enhanced multifunctionality and responsiveness is highly desired. Here, a hollow LCE (h‐LCE) fiber fabricated via coaxial spinning, enabling the straightforward yet effective creation of functional LCE composites, is reported. Inspired by the fiber‐tubule architecture in skeletal muscles, the hollow fiber features an LCE outer shell for programmable actuation and an inner channel allowing for the integration of a variety of functional media. Thus, the h‐LCE fiber can serve as a versatile platform for multifunctionalities in LCE composites. With this unique design strategy, h‐LCE fibers are fabricated with lengths exceeding 3 meters in the lab with outer and inner diameters as small as 250 mm and 120 µm, respectively. The versatility of these h‐LCE fibers across various applications are further demonstrated, from fast‐response stiffness‐tunable actuators by integrating water flow as triggering media and shape memory polymer (SMP) for enhanced mechanical properties, to electrically driven actuating systems through the incorporation of liquid metal, and actuating light‐guides by combining SMP and PDMS optical fiber. The conception of h‐LCE fiber not only advances the design of multifunctional LCE composites but also paves the way for their application in soft robotics, artificial muscles, and beyond.
-
null (Ed.)Dielectric elastomer (DE) materials, a category of electroactive polymers, can be used to design actuators that are flexible, resilient, lightweight, and durable. However, due to the uncertainties in its actuation dynamics, DE actuators always rely on feedback control to perform accurate and safe operations. In this paper, a tubular dielectric elastomer actuator (DEA) with self-sensing capability is developed. It does not require external devices to measure displacement for feedback control. The displacement of the actuator is controlled using a proportional-integral controller with the capacitance measured at high probing frequency as the self-sensing mechanism component of the actuator. By superimposing actuation and probing voltage and applying them to the DE tube, the actuation voltage activates the movement of the DE tube and the probing voltage is used for self-sensing. Fast Fourier Transform (FFT) is then used to filter a given frequency of the probing current and voltage and then calculate the capacitance from the probing current and voltage during each time window. With the relationship between capacitance and displacement of the DE tube, the displacement output is estimated online and self-sensing without an external sensor is achieved. The self-sensing signal is then used as a feedback signal in a closed-loop design to follow a reference signal for tracking. The experimental results validate the self-sensing of the DE actuator in feedback control.more » « less
-
Fibers capable of generating axial contraction are commonly seen in nature and engineering applications. Despite the broad applications of fiber actuators, it is still very challenging to fabricate fiber actuators with combined large actuation strain, fast response speed, and high power density. Here, we report the fabrication of a liquid crystal elastomer (LCE) microfiber actuators using a facile electrospinning technique. Owing to the extremely small size of the LCE microfibers, they can generate large actuation strain (~60 percent) with a fast response speed (<0.2 second) and a high power density (400 watts per kilogram), resulting from the nematic-isotropic phase transition of liquid crystal mesogens. Moreover, no performance degradation is detected in the LCE microfibers after 106cycles of loading and unloading with the maximum strain of 20 percent at high temperature (90 degree Celsius). The small diameter of the LCE microfiber also results in a self-oscillatory behavior in a steady temperature field. In addition, with a polydopamine coating layer, the actuation of the electrospun LCE microfiber can be precisely and remotely controlled by a near-infrared laser through photothermal effect. Using the electrospun LCE microfiber actuator, we have successfully constructed a microtweezer, a microrobot, and a light-powered microfluidic pump.
-
Abstract Soft robots have attracted attention for biomedical and consumer devices. However, most of these robots are pneumatically actuated, requiring a tether and thus limiting wearable applications that require multiple controlled actuators. By pairing liquid‐vapor phase change actuation with a textile‐based laminated manufacturing method, smart thermally actuating textiles (STATs) eliminate the need for a pneumatic tether. STATs are lightweight and unobtrusive for wearable applications and exploit a facile manufacturing approach that supports arbitrary customization of the form factor and easy creation of connected arrays of individual robotic modules. Through integrated sensing and heating elements, STATs demonstrate closed‐loop feedback that enables dynamic pressure control in the presence of environmental temperature fluctuations.