Long-period (T > 10 s) shear wave reflections between the surface and reflecting boundaries below seismic stations are useful for studying phase transitions in the mantle transition zone (MTZ) but shear-velocity heterogeneity and finite-frequency effects complicate the interpretation of waveform stacks. We follow up on a recent study by Shearer & Buehler (hereafter SB19) of the top-side shear wave reflection Ssds as a probe for mapping the depths of the 410-km and 660-km discontinuities beneath the USArray. Like SB19, we observe that the recorded Ss410s-S and Ss660s-S traveltime differences are longer at stations in the western United States than in the central-eastern United States. The 410-km and 660-km discontinuities are about 40–50 km deeper beneath the western United States than the central-eastern United States if Ss410s-S and Ss660s-S traveltime differences are transformed to depth using a common-reflection point (CRP) mapping approach based on a 1-D seismic model (PREM in our case). However, the east-to-west deepening of the MTZ disappears in the CRP image if we account for 3-D shear wave velocity variations in the mantle according to global tomography. In addition, from spectral-element method synthetics, we find that ray theory overpredicts the traveltime delays of the reverberations. Undulations of the 410-km and 660-km discontinuities are underestimated when their wavelengths are smaller than the Fresnel zones of the wave reverberations in the MTZ. Therefore, modelling of layering in the upper mantle must be based on 3-D reference structures and accurate calculations of reverberation traveltimes.
Topside reverberations off mantle discontinuities are commonly observed at long periods, but their interpretation is complicated because they include both near‐source and near‐receiver reflections. We have developed a method to isolate the stationside reflectors in large data sets with many sources and receivers. Analysis of USArray transverse‐component data from 3,200 earthquakes, using direct
- Award ID(s):
- 1829601
- NSF-PAR ID:
- 10451621
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 124
- Issue:
- 9
- ISSN:
- 2169-9313
- Page Range / eLocation ID:
- p. 9638-9652
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
SUMMARY -
null (Ed.)SUMMARY The method of ScS reverberation migration is based on a ‘common reflection point’ analysis of multiple ScS reflections in the mantle transition zone (MTZ). We examine whether ray-theoretical traveltimes, slownesses and reflection points are sufficiently accurate for estimating the thickness H of the MTZ, defined by the distance between the 410- and 660-km phase transitions. First, we analyse ScS reverberations generated by 35 earthquakes and recorded at hundreds of seismic stations from the combined Arrays in China, Hi-NET in Japan and the Global Seismic Network. This analysis suggests that H varies by about 30 km and therefore that dynamic processes have modified the large-scale structure of the MTZ in eastern Asia and the western Pacific region. Second, we apply the same procedure to spectral-element synthetics for PREM and two 3-D models. One 3-D model incorporates degree-20 topography on the 410 and 660 discontinuities, otherwise preserving the PREM velocity model. The other model incorporates the degree-20 velocity heterogeneity of S20RTS and leaves the 410 and 660 flat. To optimize reflection point coverage, our synthetics were computed assuming a homogeneous grid of stations using 16 events, four of which are fictional. The resolved image using PREM synthetics resembles the PREM structure and indicates that the migration approach is correct. However, ScS reverberations are not as strongly sensitive to H as predicted ray-theoretically because the migration of synthetics for a model with degree-20 topography on the 410 and 660: H varies by less than 5 km in the resolved image but 10 km in the original model. In addition, the relatively strong influence of whole-mantle shear-velocity heterogeneity is evident from the migration of synthetics for the S20RTS velocity model and the broad sensitivity kernels of ScS reverberations at a period of 15 s. A ray-theoretical approach to modelling long-period ScS traveltimes appears inaccurate, at least for continental-scale regions with relatively sparse earthquake coverage. Additional modelling and comparisons with SS precursor and receiver function results should rely on 3-D waveform simulations for a variety of structures and ultimately the implementation of full wave theory.more » « less
-
Summary To provide constraints on a number of significant controversial issues related to the structure and dynamics of the Australian continent, we utilize P-to-S receiver functions (RFs) recorded by 182 stations to map the 410 and 660 km discontinuities (d410 and d660, respectively) bordering the mantle transition zone (MTZ). The RFs are stacked in successive circular bins with a radius of 1o under a non-plane wavefront assumption. The d410 and d660 depths obtained using the 1-D IASP91 Earth model show a systematic apparent uplifting of about 15 km for both discontinuities in central and western Australia relative to eastern Australia, as the result of higher seismic wavespeeds in the upper mantle beneath the former area. After correcting the apparent depths using the Australian Seismological Reference Model, the d410 depths beneath the West Australia Craton are depressed by ∼10 km on average relative to the normal depth of 410 km, indicating a positive thermal anomaly of 100 K at the top of the MTZ which could represent a transition from a thinner than normal MTZ beneath the Indian ocean and the normal MTZ beneath central Australia. The abnormally thick MTZ beneath eastern Australia can be adequately explained by subducted cold slabs in the MTZ. A localized normal thickness of the MTZ beneath the Newer Volcanics Province provides supporting evidence of non-mantle-plume mechanism for intraplate volcanic activities in the Australian continent.more » « less
-
more » « less
Abstract Seismic discontinuities in the mantle are indicators of its thermo-chemical state and offer clues to its dynamics. Ray-based seismic methods, though limited by the approximations made, have mapped mantle transition zone discontinuities in detail, but have yet to offer definitive conclusions on the presence and nature of mid-mantle discontinuities. Here, we show how to use a wave-equation-based imaging method, reverse-time migration of precursors to surface-reflected seismic body waves, to uncover both mantle transition zone and mid-mantle discontinuities, and interpret their physical nature. We observe a thinned mantle transition zone southeast of Hawaii, and a reduction in impedance contrast around 410 km depth in the same area, suggesting a hotter-than-average mantle in the region. Here, we furthermore reveal a 4000–5000 km-wide reflector in new images of the mid mantle below the central Pacific, at 950–1050 km depth. This deep discontinuity exhibits strong topography and generates reflections with polarity opposite to those originating at the 660 km discontinuity, implying an impedance reversal near 1000 km. We link this mid-mantle discontinuity to the upper reaches of deflected mantle plumes upwelling in the region. Reverse-time migration full-waveform imaging is a powerful approach to imaging Earth’s interior, capable of broadening our understanding of its structure and dynamics and shrinking modeling uncertainties.
-
more » « less
Abstract Using recently collected high‐resolution seismic data along a dense linear transect across Ohio, West Virginia, and Virginia (called Mid‐Atlantic Geophysical Integrative Collaboration (MAGIC) profile), we analyze P‐to‐S receiver functions to investigate the undulations of the mantle transition zone (MTZ) discontinuities (410‐ and 660‐km) beneath the central Appalachian region. Our results incorporating the effects of local crustal and mantle structures suggest shallowing of both the 410‐ and the 660‐km discontinuities from the northwest (inland) to the southeast (coast) along MAGIC profile. Hydro‐thermal upwelling beneath the eastern U.S. coastal plain due to a hydrated MTZ and hot upwelling return flow associated with the descending lower mantle Farallon slab is consistent with our observations of MTZ structure considering 3D velocity heterogeneity. The inferred hydrous hot upwelling rising into the upper mantle may trigger dehydration melting atop the 410‐km discontinuity, which may help to explain the presence of a low velocity upper mantle anomaly beneath the region today.
