An official website of the United States government
Abstract Aquatic vegetation has the potential to increase suspended sediment capture while also increasing sediment resuspension and bedload transport. Suspended sediment can induce density stratification, which modulates the turbulence in the water column. We derive a Rouse‐based formulation for suspended sediment concentration (SSC) including the effect of sediment‐induced density stratification. We perform Large Eddy Simulations of vegetated and non‐vegetated channels to explicitly highlight the effect of stratification on SSC profiles. We found that the impact of stratification is dominant in the near‐bed region within the bottom boundary layer, affecting both sediment resuspension and bedload transport. Stratification reduces the likelihood of both dominant sweep and ejection events in the near the bed region which may affect sediment entrainment and bedload transport. Modifications to existing models of sediment entrainment and bedload transport are suggested to account for the effects of sediment induced stratification in vegetated and non‐vegetated channels.
more »
« less
Sediment‐Induced Stratification in an Estuarine Bottom Boundary Layer
Abstract We took field observations on the shallow shoals of South San Francisco Bay to examine how sediment‐induced stratification affects the mean flow and mixing of momentum and sediment throughout the water column. A Vectrino Profiler measured near‐bed velocity and suspended sediment concentration profiles, which we used to calculate profiles of turbulent sediment and momentum fluxes. Additional turbulence statistics were calculated using data from acoustic Doppler velocimeters placed throughout the water column. Results showed that sediment‐induced stratification, which was set up by strong near‐bed wave shear, can reduce the frictional bottom drag felt by the mean flow. Measured turbulence statistics suggest that this drag reduction is caused by stratification suppressing near‐bed turbulent fluxes and reducing turbulent kinetic energy dissipation. Turbulent sediment fluxes, however, were not shown to be limited by sediment‐induced stratification. Finally, we compared our results to a common model parameterization which characterizes stratification through a stability parameter modification to the turbulent eddy viscosity and suggest a new nondimensional parameter that may be better suited to represent stratification when modeling oscillatory boundary layer flows.
more »
« less
- Award ID(s):
- 1736668
- PAR ID:
- 10452259
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Oceans
- Volume:
- 125
- Issue:
- 8
- ISSN:
- 2169-9275
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Coral reef roughness produces turbulent boundary layers and bottom stresses that are important for reef metabolism monitoring and reef circulation modeling. However, there is some uncertainty as to whether field methods for estimating bottom stress are applicable in shallow canopy environments as found on coral reefs. Friction velocities () and drag coefficients () were estimated using five independent methods and compared across 14 sites on a shallow forereef (2–9 m deep) in Palau with large and spatially variable coral roughness elements (0.4–1 m tall). The methods included the following: (a) momentum balance closure, (b) log‐fitting to velocity profiles, (c) Reynolds stresses, (d) turbulence dissipation, and (e) roughness characterization from digital elevation models (DEMs). Both velocity profiles and point turbulence measurements indicated good agreement with log‐layer scaling, suggesting that measurements were taken within a well‐developed turbulent boundary layer and that canopy effects were minimal. However, estimated from the DEMs, momentum budget and log‐profile fitting were consistently larger than those estimated from direct turbulence measurements. Near‐bed Reynolds stresses only contributed about 1/3 of the total bottom stress and drag produced by the reef. Thus, effects of topographical heterogeneity that induce mean velocity fluxes, dispersive stresses, and form drag are expected to be important. This decoupling of total drag and local turbulence implies that both rates of mass transfer as well as values of fluxes inferred from concentration measurements may be proportional to smaller, turbulence‐derived values of rather than to those based on larger‐scale flow structure.more » « less
-
A large eddy simulation (LES) is performed for a turbulent open channel flow over a porous sediment bed at permeability Reynolds number of ReK∼2.56 (Reτ = 270) representative of aquatic systems. A continuum approach based on the upscaled, volume-averaged Navier−Stokes (VaNS) equations is used by defining smoothly varying porosity across the sediment water interface (SWI) and modeling the drag force in the porous bed using a modified Ergun equation with Forchheimer corrections for inertial terms. The results from the continuum approach are compared with a pore-resolved direct numerical simulation (PR-DNS) in which turbulent flow over a randomly packed sediment bed of monodispersed particles is investigated [Karra et al.,J. Fluid Mech. 971, A23 (2023)] A spatially varying porosity profile generated from the pore-resolved DNS is used in the continuum approach. Mean flow, Reynolds stress statistics, and net momentum exchange between the freestream and the porous bed are compared between the two studies, showing reasonably good agreement. Small deviations within the transitional region between the sediment bed and the freestream as compared to the PR-DNS results are attributed to the local protrusions of particles in a randomly packed bed that are absent in the continuum approach but are present in the PR-DNS. A better representation of the effective permeability in the top transition layer that accounts for roughness effect of exposed particles is necessary. The continuum approach significantly reduces the computational cost, thereby making it suitable to study hyporheic exchange of mass and momentum in large scale aquatic domains with combined influence of bedform and bed roughness.more » « less
-
Pore-resolved direct numerical simulations (DNS) are used to investigate the interactions between stream-water flow turbulence and groundwater flow through a porous sediment bed in the hyporheic zone. Two permeability Reynolds numbers (2.56 and 5.17), representative of aquatic systems and representing ratio of permeability to viscous length scales, were simulated to understand its influence on the momentum exchange at the sediment-water interface (SWI). A doubleaveraging methodology is used to compute the Reynolds stresses, form-induced stresses, and pressure fluctuations. It is observed that both shear layer and turbulent shear stress penetration increases with ReK. Reynolds and form-induced bed-normal stresses increase with ReK. The peak values of the form-induced stresses for the lower (2.56) and higher (5.17) ReK happen within the top layer of the sediment bed. The sum of turbulent and form-induced pressure fluctuations, analyzed at their respective zero-displacement planes, are statistically similar and can be well approximated by a t location-scale distribution fit providing with a model that could potentially be used to impose boundary conditions at the SWI in reach scale simulations.more » « less
-
Abstract Aquatic vegetation plays an important role in natural water environments by interacting with the flow and generating turbulence that affects the air‐water and sediment‐water interfacial transfer. Regular and staggered arrays are often set as simplified layouts for vegetation canopy to study both mean flow and turbulence statistics in vegetated flows, which creates uniform spacing between vegetation elements, resulting in preferential flow paths within the array. Such preferential paths can produce local high velocity and strong turbulence, which do not necessarily happen in natural environments where vegetation is randomly distributed. How the randomness of the canopy affects interfacial processes by altering spatial turbulence distribution, which can potentially lead to different turbulence feedback on the interfacial transfer process, remains an open question. This study conducted a series of laboratory experiments in a race‐track flume using rigid cylinders as plant surrogates. Mean and turbulent flow statistics were characterized by horizontal‐ and vertical‐sliced PIV. Based on the measured flow characteristics under different stem diameters and array configurations, we propose a method to quantify the randomness of the vegetation array and update a sediment‐water‐air interfacial gas transfer model with the randomness parameter to improve its accuracy. The updated model agrees well with the dissolved oxygen experimental data from our study and data from existing literature at various scales. The study provides critical insight into water quality management in vegetated channels with improved dissolved oxygen predictions considering vegetation layout as part of the interfacial transfer model.more » « less
