Light‐emitting electrochemical cells (LECs) are devices that utilize efficient ion redistribution to produce high‐efficiency electroluminescence in a simple device architecture. Prototypical polymer LECs utilize three components in the active layer: a luminescent conducting polymer, a salt, and an electrolyte. Similarly, many small‐molecule LECs also utilize an electrolyte to disperse salts. In these systems, the electrolyte is incorporated to efficiently conduct ions and to maintain phase compatibility between all components. However, certain LEC approaches and materials systems enable device operation without a dedicated electrolyte. This review describes the general methods and materials used to circumvent the use of a dedicated electrolyte in LECs. The techniques of synthetically coupling electrolytes, incorporating ionic liquids, and introducing inorganic salts are presented in view of research efforts to date. The use of these techniques in emerging classes of light‐emitting electrochemical cells is also discussed. These approaches have yielded some of the most efficient, long‐lasting, and commercially applicable LECs to date.
Hybrid organic–inorganic perovskite light‐emitting devices (LEDs) have recently shown the characteristic dynamical behavior of light‐emitting electrochemical cells (LECs), with intrinsic ionic migration creating an electric double layer and internal p‐i‐n structure and by accumulation of ions at interfaces. Therefore, the development of perovskite light‐emitting and photovoltaic devices based on the concepts of LEC operation attracts much attention and clarifies general physical processes in perovskites. Here, new directions that can further improve perovskite optoelectronic devices and extend their functionalities using additive mobile ions are overviewed: 1) enhancing single‐layer LECs with lithium additives for increased efficiency and longer lifetime; 2) facilitating ionic motion in three‐layer perovskite LECs to create dual‐functional devices, operating as both LEC and solar cells; and 3) creating truly ambipolar LEC devices with carbon nanotubes as stable electrodes that leverage ionic doping. Taken together, the use of these approaches provides a strategy to create efficient, stable, and bright LECs, which use advantages of both LED and LEC operation. It is discussed that how the LEC behavior in perovskite LEDs can be further improved to address the long‐term challenges in perovskite optoelectronics, such as stability, through approaches like ionically reconfigurable host/guest systems.
more » « less- Award ID(s):
- 1906505
- PAR ID:
- 10453902
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Optical Materials
- Volume:
- 9
- Issue:
- 3
- ISSN:
- 2195-1071
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract Blue electroluminescence is highly desired for emerging light‐emitting devices for display applications and optoelectronics in general. However, saturated, efficient, and stable blue emission has been challenging to achieve, particularly in mixed‐halide perovskites, where intrinsic ion motion and halide segregation compromises spectral purity. Here, CsPbBr3−
x Clx perovskites, polyelectrolytes, and a salt additive are leveraged to demonstrate pure blue emission from single‐layer light‐emitting electrochemical cells (LECs). The electrolytes transport the ions from salt additives, enhancing charge injection and stabilizing the inherent perovskite emissive lattice for highly pure and sustained blue emission. Substituting Cl into CsPbBr3tunes the perovskite luminescence from green through blue. Sky blue and saturated blue devices produce International Commission on Illumination coordinates of (0.105, 0.129) and (0.136, 0.068), respectively, with the latter meeting the US National Television Committee standard for the blue primary. Likewise, maximum luminances of 2900 and 1000 cd m−2, external quantum efficiencies (EQEs) of 4.3% and 3.9%, and luminance half‐lives of 5.7 and 4.9 h are obtained for sky blue and saturated blue devices, respectively. Polymer and LiPF6inclusion increases photoluminescence efficiency, suppresses halide segregation, induces thin‐film smoothness and uniformity, and reduces crystallite size. Overall, these devices show superior performance among blue perovskite light‐emitting diodes (PeLEDs) and general LECs. -
Abstract Perovskite light‐emitting diodes (LEDs) have recently attracted great research interest for their narrow emissions and solution processability. Remarkable progress has been achieved in green perovskite LEDs in recent years, but not blue or red ones. Here, highly efficient and spectrally stable red perovskite LEDs with quasi‐2D perovskite/poly(ethylene oxide) (PEO) composite thin films as the light‐emitting layer are reported. By controlling the molar ratios of organic salt (benzylammonium iodide) to inorganic salts (cesium iodide and lead iodide), luminescent quasi‐2D perovskite thin films are obtained with tunable emission colors from red to deep red. The perovskite/polymer composite approach enables quasi‐2D perovskite/PEO composite thin films to possess much higher photoluminescence quantum efficiencies and smoothness than their neat quasi‐2D perovskite counterparts. Electrically driven LEDs with emissions peaked at 638, 664, 680, and 690 nm have been fabricated to exhibit high brightness and external quantum efficiencies (EQEs). For instance, the perovskite LED with an emission peaked at 680 nm exhibits a brightness of 1392 cd m−2and an EQE of 6.23%. Moreover, exceptional electroluminescence spectral stability under continuous device operation has been achieved for these red perovskite LEDs.
-
Abstract Metal halide perovskites have been in the limelight in recent years due to their enormous potential for use in optoelectronic devices, owing to their unique combination of properties, such as high absorption coefficient, long charge‐carrier diffusion lengths, and high defect tolerance. Perovskite‐based solar cells and light‐emitting diodes (LEDs) have achieved remarkable breakthroughs in a comparatively short amount of time. As of writing, a certified power conversion efficiency of 22.7% and an external quantum efficiency of over 10% have been achieved for perovskite solar cells and LEDs, respectively. Interfaces and defects have a critical influence on the properties and operational stability of metal halide perovskite optoelectronic devices. Therefore, interface and defect engineering are crucial to control the behavior of the charge carriers and to grow high quality, defect‐free perovskite crystals. Herein, a comprehensive review of various strategies that attempt to modify the interfacial characteristics, control the crystal growth, and understand the defect physics in metal halide perovskites, for both solar cell and LED applications, is presented. Lastly, based on the latest advances and breakthroughs, perspectives and possible directions forward in a bid to transcend what has already been achieved in this vast field of metal halide perovskite optoelectronic devices are discussed.
-
Abstract Organometal halide perovskite light emitting diodes (LEDs) have attracted a lot of attention in recent years, owing to the rapid progress in device efficiency. However, their short operational lifetime severely impedes the practical uses of these devices. The operating stability of perovskite LEDs are due to degradation due to ambient environment and degradation during operation. The former can be suppressed by encapsulation while the latter one is the intrinsic degradation due to the electrochemical stability of the perovskite materials. In addition, perovskites also suffer from ion migration which is a major degradation mechanism in perovskite LEDs. In this review, we specifically focus on the operational stability of perovskite LEDs. The review is divided into two parts: the first part contains a summary of various degradation mechanisms and some insight on the degradation behavior and the second part is the strategies how to improve the operational stability, especially the strategies to suppress ion migration. Based on the current advances in the literature, we finally present our perspectives to improve the device stability.