The development of the photostable higher‐order multiphoton‐excited (MPE) upconversion single microcrystalline material is fundamentally and technologically important, but very challenging. Here, up to five‐photon excited luminescence in a host–guest metal–organic framework (MOF) and perovskite quantum dot (QD) hybrid single crystal ZJU‐28⊃MAPbBr3is shown via an in situ growth approach. Such a MOF strategy not only results in a high QD loading concentration, but also significantly diminishes the aggregation‐caused quenching (ACQ) effect, provides effective surface passivation, and greatly reduces the contact of the QDs with the external bad atmosphere due to the confinement effect and protection of the framework. These advantages make the resulting ZJU‐28⊃MAPbBr3single crystals possess high PLQY of ≈51.1%, a high multiphoton action cross‐sections that can rival the current highest record (measured in toluene solution), and excellent photostability. These findings liberate the excellent luminescence and nonlinear optical properties of perovskite QDs from the solution system to the solid single‐crystal system, which provide a new avenue for the exploitation of high‐performance multiphoton excited hybrid single microcrystal for future optoelectronic and micro–nano photonic integration applications.
Single crystal perovskite microplates are fundamentally and technologically very important to developing high‐order (
- PAR ID:
- 10455781
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Small Methods
- Volume:
- 3
- Issue:
- 12
- ISSN:
- 2366-9608
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract Room temperature semiconductor detector (RTSD) materials for γ‐ray and X‐ray radiation are in great demand for the nonproliferation of nuclear materials as well as for biomedical imaging applications. Halide perovskites have attracted great attention as emerging and promising RTSD materials. In this contribution, the material synthesis, purification, crystal growth, crystal structure, photoluminescence properties, ionizing radiation detection performance, and electronic structure of the inorganic halide perovskitoid compound TlPbI3are reported on. This compound crystallizes in the ABX3non‐perovskite crystal structure with a high density of
d = 6.488 g·cm–3, has a wide bandgap of 2.25 eV, and melts congruently at a low temperature of 360 °C without phase transitions, which allows for facile growth of high quality crystals with few thermally‐activated defects. High‐quality TlPbI3single crystals of centimeter‐size are grown using the vertical Bridgman method using purified raw materials. A high electrical resistivity of ≈1012 Ω·cm is readily obtainable, and detectors made of TlPbI3single crystals are highly photoresponsive to Ag KαX‐rays (22.4 keV), and detects 122 keV γ‐rays from57Co radiation source. The electron mobility‐lifetime productµeτe was estimated at 1.8 × 10–5cm2·V–1. A high relative static dielectric constant of 35.0 indicates strong capability in screening carrier scattering and charged defects in TlPbI3. -
Abstract Mixtures of Ce‐doped rare‐earth aluminum perovskites are drawing a significant amount of attention as potential scintillating devices. However, the synthesis of complex perovskite systems leads to many challenges. Designing the A‐site cations with an equiatomic ratio allows for the stabilization of a single‐crystal phase driven by an entropic regime. This work describes the synthesis of a highly epitaxial thin film of configurationally disordered rare‐earth aluminum perovskite oxide (La0.2Lu0.2Y0.2Gd0.2Ce0.2)AlO3and characterizes the structural and optical properties. The thin films exhibit three equivalent epitaxial domains having an orthorhombic structure resulting from monoclinic distortion of the perovskite cubic cell. An excitation of 286.5 nm from Gd3+and energy transfer to Ce3+with 405 nm emission are observed, which represents the potential for high‐energy conversion. These experimental results also offer the pathway to tunable optical properties of high‐entropy rare‐earth epitaxial perovskite films for a range of applications.
-
Abstract Spectroscopic‐grade single crystal detectors can register the energies of individual X‐ray interactions enabling photon‐counting systems with superior resolution over traditional photoconductive X‐ray detection systems. Current technical challenges have limited the preparation of perovskite semiconductors for energy‐discrimination X‐ray photon‐counting detection. Here, this work reports the deployment of a spectroscopic‐grade CsPbBr3Schottky detector under reverse bias for continuum hard X‐ray detection in both the photocurrent and spectroscopic schemes. High surface barriers of
≈ 1 eV are formed by depositing solid bismuth and gold contacts. The spectroscopic response under a hard X‐ray source is assessed in resolving the characteristic X‐ray peak. The methodology in enhancing X‐ray sensitivity by controlling the X‐ray energies and flux, and voltage, is described. The X‐ray sensitivity varies between a few tens to over 8000 μC Gyair−1cm−2. The detectable dose rate of the CsPbBr3detectors is as low as 0.02 nGyairs−1in the energy discrimination configuration. Finally, the unbiased CsPbBr3device forms a spontaneous contact potential difference of about 0.7 V enabling high quality of the CsPbBr3single crystals to operate in “passive” self‐powered X‐ray detection mode and the X‐ray sensitivity is estimated as 14 μC Gyair−1cm−2. The great potential of spectroscopic‐grade CsPbBr3devices for X‐ray photon‐counting systems is anticipated in this work. -
Abstract In the past years, hybrid perovskite materials have attracted great attention due to their superior optoelectronic properties. In this study, the authors report the utilization of cobalt (Co2+) to partially substitute lead (Pb2+) for developing novel hybrid perovskite materials, CH3NH3Pb1‐
x Cox I3(wherex is nominal ratio,x = 0, 0.1, 0.2 and 0.4). It is found that the novel perovskite thin films possess a cubic crystal structure with superior thin film morphology and larger grain size, which is significantly different from pristine thin film, which possesses the tetragonal crystal structure, with smaller grain size. Moreover, it is found that the 3d orbital of Co2+ensures higher electron mobilities and electrical conductivities of the CH3NH3Pb1‐x Cox I3thin films than those of pristine CH3NH3Pb4thin film. As a result, a power conversion efficiency of 21.43% is observed from perovskite solar cells fabricated by the CH3NH3Pb0.9Co0.1I3thin film. Thus, the utilization of Co, partially substituting for Pb to tune physical properties of hybrid perovskite materials provides a facile way to boost device performance of perovskite solar cells.