skip to main content

Title: Spatial models of cell distribution in human lumbar dorsal root ganglia

Dorsal root ganglia (DRG), which contain the somata of primary sensory neurons, have increasingly been considered as novel targets for clinical neural interfaces, both for neuroprosthetic and pain applications. Effective use of either neural recording or stimulation technologies requires an appropriate spatial position relative to the target neural element, whether axon or cell body. However, the internal three‐dimensional spatial organization of human DRG neural fibers and somata has not been quantitatively described. In this study, we analyzed 202 cross‐sectional images across the length of 31 human L4 and L5 DRG from 10 donors. We used a custom semi‐automated graphical user interface to identify the locations of neural elements in the images and normalize the output to a consistent spatial reference for direct comparison by spinal level. By applying a recursive partitioning algorithm, we found that the highest density of cell bodies at both spinal levels could be found in the inner 85% of DRG length, the outer‐most 25–30% radially, and the dorsal‐most 69–76%. While axonal density was fairly homogeneous across the DRG length, there was a distinct low density region in the outer 7–11% radially. These findings are consistent with previous qualitative reports of neural distribution in DRG. The quantitative measurements we provide will enable improved targeting of future neural interface technologies and DRG‐focused pharmaceutical therapies, and provide a rigorous anatomical description of the bridge between the central and peripheral nervous systems.

more » « less
Award ID(s):
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Journal of Comparative Neurology
Page Range / eLocation ID:
p. 1644-1659
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Sensory axons must traverse a spinal cord glia limitans to connect the brain with the periphery. The fundamental mechanism of how these axons enter the spinal cord is still debatable; both Ramon y Cajal’s battering ram hypothesis and a boundary cap model have been proposed. To distinguish between these hypotheses, we visualized the entry of pioneer axons into the dorsal root entry zone (DREZ) with time-lapse imaging in zebrafish. Here, we identify that DRG pioneer axons enter the DREZ before the arrival of neural crest cells at the DREZ. Instead, actin-rich invadopodia in the pioneer axon are necessary and sufficient for DREZ entry. Using photoactivable Rac1, we demonstrate cell-autonomous functioning of invasive structures in pioneer axon spinal entry. Together these data support the model that actin-rich invasion structures dynamically drive pioneer axon entry into the spinal cord, indicating that distinct pioneer and secondary events occur at the DREZ. 
    more » « less
  2. Abstract

    Measuring and modelling the shape of tree stems is a fundamental component of forest inventory systems for both commercial and biological purposes. The change in diameter of the stem along its length (a.k.a. 'taper') is one of the most important and widely used means of predicting tree stem volume. Until recently, the options for obtaining accurate estimates of stem taper and developing stem taper models have been limited to measurements of felled trees or the use of optical dendrometers on standing live trees. Here, we tested both a tripod-mounted terrestrial laser scanner (TLS; a Focus 3D 120 of FARO Technologies, Inc., Lake Mary, FL, USA), and a mobile laser scanner (MLS; the ZEB1 of the GeoSLAM Ltd, Nottingham, UK) to measure tree diameters at various heights along the stem of 20 destructively harvested broadleaf and needleleaf species using the outer hull modelling method, for the purpose of developing individual-tree and species-specific taper models. Laser scanner specifications were a major factor determining stem taper measurement accuracy. The longer-range, low beam divergence TLS could estimate stem diameter to an average of 15.7 m above ground (about 79 per cent of the canopy height), while the shorter-range high beam divergence MLS could estimate an average of 11.5 m above ground (about 45 per cent of the canopy height). Stem taper error increased with respect to height above ground, with the TLS providing more consistent and reliable diameter measurements (root mean square error (RMSE) = 1.93 cm; 9.57 per cent) compared with the MLS (RMSE = 2.59 cm; 12.84 per cent), but both methods were nearly unbiased. We attribute ~60 per cent of the uncertainty in stem measurements to laser beam diameter and point density, showing positive and negative correlations, respectively. MLS was unable to converge on the two tested taper models but was found to be an efficient means of easily sampling diameters at breast height (DBH) and reconstructing stem maps in simple forest stands with trees greater than ~10 cm DBH. TLS provided precision stem diameter measurements that allowed for the creation of similar taper models for three out of the four study species. Future work should focus on evaluating MLS systems with improved specifications (e.g. beam divergence and range), since these instruments will likely lead to dramatic improvements in reliable estimates of forest inventory parameters, in line with the current TLS technology.

    more » « less
  3. Abstract

    Mice missing either Reelin or Disabled‐1 (Dab1) exhibit dorsal horn neuronal positioning errors and display heat hypersensitivity and mechanical insensitivity. Reelin binds its receptors, apolipoprotein E receptor 2 and very low‐density lipoprotein receptor, leading to the recruitment and phosphorylation of Dab1 and activation of downstream pathways that regulate neuronal migration. Previously, we reported that 70% of Dab1 laminae I–II neurons co‐expressed LIM‐homeobox transcription factor 1‐beta (Lmx1b). Here, we asked whether Reelin‐expressing dorsal horn neurons co‐express Lmx1b, are mispositioned indab1mutants, and contribute to nociceptive abnormalities. About 90% of Reelin‐labeled neurons are Lmx1b‐positive in laminae I–II, confirming that most Reelin and Dab1 neurons are glutamatergic. We determined that Reelin‐Lmx1b and Dab1‐Lmx1b dorsal horn neurons are separate populations, and together, comprise 37% of Lmx1b‐positive cells within and above the Isolectin B4 (IB4) layer in wild‐type mice. Compared to wild‐type mice,dab1mutants have a reduced area of laminae I–II outer (above the IB4 layer), more Reelin‐Lmx1b neurons within the IB4 layer, and fewer Reelin‐Lmx1b neurons within the lateral reticulated area of lamina V and lateral spinal nucleus. Interestingly, both Reelin‐ and Dab1‐labeled dorsal horn neurons sustain similar positioning errors in mutant mice. After noxious thermal and mechanical stimulation, Reelin, Lmx1b, and Reelin‐Lmx1b neurons expressed Fos in laminae I–II and the lateral reticulated area in wild‐type mice and, therefore, participate in nociceptive circuits. Together, our data suggest that disruption of the Reelin‐signaling pathway results in neuroanatomical abnormalities that contribute to the nociceptive changes that characterize these mutant mice.

    more » « less
  4. Abstract

    Researchers can investigate many aspects of animal ecology through noninvasive photo–identification. Photo–identification is becoming more efficient as matching individuals between photos is increasingly automated. However, the convolutional neural network models that have facilitated this change need many training images to generalize well. As a result, they have often been developed for individual species that meet this threshold. These single‐species methods might underperform, as they ignore potential similarities in identifying characteristics and the photo–identification process among species.

    In this paper, we introduce a multi‐species photo–identification model based on a state‐of‐the‐art method in human facial recognition, the ArcFace classification head. Our model uses two such heads to jointly classify species and identities, allowing species to share information and parameters within the network. As a demonstration, we trained this model with 50,796 images from 39 catalogues of 24 cetacean species, evaluating its predictive performance on 21,192 test images from the same catalogues. We further evaluated its predictive performance with two external catalogues entirely composed of identities that the model did not see during training.

    The model achieved a mean average precision (MAP) of 0.869 on the test set. Of these, 10 catalogues representing seven species achieved a MAP score over 0.95. For some species, there was notable variation in performance among catalogues, largely explained by variation in photo quality. Finally, the model appeared to generalize well, with the two external catalogues scoring similarly to their species' counterparts in the larger test set.

    From our cetacean application, we provide a list of recommendations for potential users of this model, focusing on those with cetacean photo–identification catalogues. For example, users with high quality images of animals identified by dorsal nicks and notches should expect near optimal performance. Users can expect decreasing performance for catalogues with higher proportions of indistinct individuals or poor quality photos. Finally, we note that this model is currently freely available as code in a GitHub repository and as a graphical user interface, with additional functionality for collaborative data management, via

    more » « less
  5. Abstract

    To feed the world population while mitigating pressing nitrogen (N) pollution problems, tremendous efforts have been devoted to developing and implementing N‐efficient technologies in crop or livestock production, but limited progress has been made. The N management improvement on a farm does not necessarily translate to N pollution reduction on a broader scale due to complex responses of natural and human systems and lack of coordination among stakeholders. Consequently, it is imperative to develop an N management framework that encompasses the complex N dynamics across systems and spatial scales, yet simple enough to guide policies and actions of various stakeholders. Here, we propose a new framework,CAFE, that defines four N management systems (Cropping,Animal‐crop,Food, andEcosystem) in a hierarchical manner, and apply it to 13 representative countries to partition N surpluses across systems in a simple and consistent manner, thereby facilitating the identification and prioritization of systems‐based intervention strategies. Surprisingly, theCropping system contributes less than half of the total N surplus within itsEcosystem for most countries, highlighting the importance of N management beyond croplands. This framework reveals that the relevant priorities and key stakeholders for enhanced N management vary among countries, such as improving theCropping‐system efficiencies in China, adjusting the animal‐crop portfolio in the Netherlands, reducing food wastage in the U.S., and lowering crop storage losses and increasing overall production capacities in African countries. As N surplus increases along theCAFEhierarchy, systems‐based intervention strategies are revealed: (a) coupling chemical fertilizers with other N sources by maintaining half of the N from manure and biological N fixation; (b) coupling animal‐crop production by reducing animal density to lower than 1.2 livestock units per hectare, and increasing self‐sufficiency of animal feed to above 50%; (c) coupling food trade with domestic demand and production; and (d) coupling population needs for economic opportunities with environmental capacity of the region. This novel framework can help unpack the “wicked” N management challenges across systems to provide new insights and tools for improving N management on and beyond farms.

    more » « less