skip to main content


Title: Lightning Effects on the Grain Size Distribution of Volcanic Ash
Abstract

Natural volcanic ashfall samples were examined, and high‐current (~100 kA) electrical impulse experiments were conducted to reveal the changes in grain size that can occur during lightning discharge. Experiments on pseudo ash samples manufactured from volcanic deposits of both rhyolitic and basaltic composition show that aggregates of very fine grained ash particles (<32 μm) melt and degas to form vesiculated pumice fragments >100 μm in size. In some cases, bubbles <5 μm in diameter expand and detach from the outer surface of the pumice to form hollow spheres of glass, one type of lightning‐induced volcanic spherule, while other bubbles fragment. Volcanic ashfall from the 2009 Redoubt eruption and the 2016 Pavlof eruption contains both pumiceous grains and individual spherules. Results of this study reveal that volcanic lightning will alter the grain size distribution of ash through melting, vesiculation, and fragmentation of individual particles or ash aggregates.

 
more » « less
NSF-PAR ID:
10460795
Author(s) / Creator(s):
 ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Geophysical Research Letters
Volume:
46
Issue:
6
ISSN:
0094-8276
Page Range / eLocation ID:
p. 3133-3141
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Over the last decades, remote observation tools and models have been developed to improve the forecasting of ash‐rich volcanic plumes. One challenge in these forecasts is knowing the properties at the vent, including the mass eruption rate and grain size distribution (GSD). Volcanic lightning is a common feature of explosive eruptions with high mass eruption rates of fine particles. The GSD is expected to play a major role in generating lightning in the gas thrust region via triboelectrification. Here, we experimentally investigate the electrical discharges of volcanic ash as a function of varying GSD. We employ two natural materials, a phonolitic pumice and a tholeiitic basalt (TB), and one synthetic material (soda‐lime glass beads [GB]). For each of the three materials, coarse and fine grain size fractions with known GSDs are mixed, and the particle mixture is subjected to rapid decompression. The experiments are observed using a high‐speed camera to track particle‐gas dispersion dynamics during the experiments. A Faraday cage is used to count the number and measure the magnitude of electrical discharge events. Although quite different in chemical composition, TB and GB show similar vent dynamics and lightning properties. The phonolitic pumice displays significantly different ejection dynamics and a significant reduction in lightning generation. We conclude that particle‐gas coupling during an eruption, which in turn depends on the GSD and bulk density, plays a major role in defining the generation of lightning. The presence of fines, a broad GSD, and dense particles all promote lightning.

     
    more » « less
  2. Abstract

    During explosive volcanic eruptions, volcanic ash is ejected into the atmosphere, impacting aircraft safety and downwind communities. These volcanic clouds tend to be dominated by fine ash (<63 μm in diameter), permitting transport over hundreds to thousands of kilometers. However, field observations show that much of this fine ash aggregates into clusters or pellets with faster settling velocities than individual particles. Models of ash transport and deposition require an understanding of aggregation processes, which depend on factors like moisture content and local particle collision rates. In this study, we develop a Plume Model for Aggregate Prediction, a one‐dimensional (1D) volcanic plume model that predicts the plume rise height, concentration of water phases, and size distribution of resulting ash aggregates from a set of eruption source parameters. The plume model uses a control volume approach to solve mass, momentum, and energy equations along the direction of the plume axis. The aggregation equation is solved using a fixed pivot technique and incorporates a sticking efficiency model developed from analog laboratory experiments of particle aggregation within a novel turbulence tower. When applied to the 2009 eruption of Redoubt Volcano, Alaska, the 1D model predicts that the majority of the plume is over‐saturated with water, leading to a high rate of aggregation. Although the mean grain size of the computed Redoubt aggregates is larger than the measured deposits, with a peak at 1 mm rather than 500 μm, the present results provide a quantitative estimate for the magnitude of aggregation in an eruption.

     
    more » « less
  3. We document the presence, composition, and number density (TND) of titanomagnetite nanolites and ultra‐nanolites in aphyric rhyolitic pumice, obsidian, and vesicular obsidian from the 1060 CE Glass Mountain volcanic eruption of Medicine Lake Volcano, California, using magnetic methods. Curie temperatures indicate compositions of Fe2.40Ti0.60O4 to Fe3O4. Rock‐magnetic parameters sensitive to domain state, which is dependent on grain volume, indicate a range of particle sizes spanning superparamagnetic (<50–80 nm) to multidomain (>10 μm) particles. Cylindrical cores drilled from the centers of individual pumice clasts display anisotropy of magnetic susceptibility with prolate fabrics, with the highest degree of anisotropy coinciding with the highest vesicularity. Fabrics within a pumice clast require particle alignment within a fluid, and are interpreted to result from the upward transport of magma driven by vesiculation, ensuing bubble growth, and shearing in the conduit. Titanomagnetite number density (TND) is calculated from titanomagnetite volume fraction, which is determined from ferromagnetic susceptibility. TND estimates for monospecific assemblages of 1,000 nm–10 nm cubes predict 10^12 to 10^20 m^−3 of solid material, respectively. TND estimates derived using a power law distribution of grain sizes predict 10^18 to 10^19  m^−3. These ranges agree well with TND determinations of 10^18 to 10^20  m^−3 made by McCartney et al. (2024), and are several orders of magnitude larger than the number density of bubbles in these materials. These observations are consistent with the hypothesis that titanomagnetite crystals already existed in extremely high number‐abundance at the time of magma ascent and bubble nucleation. 
    more » « less
  4. Abstract

    The physical properties of minerals are modified by the high temperatures of volcanic lightning during explosive eruptions. Alteration involves rapid heating and volatilization, melting, and fusion of ash grains within the discharge channel, followed by rapid quenching into new glassy textures. High current impulse experiments reveal that lightning alters not only the morphology and mineralogy of volcanic ash but also its magnetic properties. We investigate lightning‐induced magnetic changes in five igneous minerals (<32 μm powders of albite, labradorite, augite, hornblende, and magnetite) by comparing hysteresis parameters before and after impulse experiments conducted at peak currents of 25 and 40 kA. Both the paramagnetic and ferrimagnetic behaviors of the samples were altered, which we interpret as a superposition of two processes. (a) Rapid melting allows iron contained within inclusions of Fe‐oxides and Fe‐bearing silicates to diffuse into the newly formed melt, thereby increasing the paramagnetism of the resulting glass. (b) Nucleation and growth of magnetite from the newly formed melt increases the ferrimagnetic behavior of the post‐experimental samples. Nominally non‐Fe‐bearing silicates like albite and labradorite have significantly increased paramagnetism and ferrimagnetism. Fe‐bearing silicates like augite and hornblende contain higher concentrations of ferrimagnetic inclusions, from which Fe diffuses into the newly formed melt, thereby increasing paramagnetism while decreasing ferrimagnetism. Experiments conducted on magnetite produced new magnetite crystals with dendritic habits. Although specific to volcanic ash, these results provide important insights into the magnetism of other materials affected by lightning on Earth, the Moon, and throughout the solar system.

     
    more » « less
  5. Abstract

    Lightning‐induced volcanic spherules (LIVS) are glasses produced by the rapid melting and solidification of molten volcanic ash grains. High temperatures generated by lightning will alter the physical and chemical properties of minerals exposed to the discharge. Laboratory experiments reveal that LIVS glass composition varies depending on the starting material, exhibiting heterogeneous compositional features common in other glasses created by cloud‐to‐ground lightning, nuclear explosions, and high velocity impact events. This study uses scanning electron microscopy, energy dispersive spectroscopy, and Raman spectroscopy to investigate the structure and Raman signatures of lightning‐induced glass spherules manufactured from five igneous minerals (<32 μm powders of albite, labradorite, augite, hornblende, and magnetite). LIVS were created through high‐current impulse experiments using peak currents of 25 and 40 kA. Analysis of the post‐experimental albite, labradorite, augite, and hornblende LIVS reveal primarily homogeneous silicate or aluminosilicate glasses with limited heterogeneity. Their amorphous Raman spectra are comparable to rhyolitic and mafic natural glasses along with Na2O‐K2O‐Al2O3‐SiO2, CaCO3‐Al2O3‐SiO2,and CaO‐MgO‐SiO2synthetic glass networks. A few of the augite and hornblende LIVS spectra exhibit premelting effects, which occur below the melting point and represent the onset of cation disordering in phases that remain crystalline. Magnetite samples produced crystal‐rich, glass‐poor LIVS characterized by the growth of dendritic microcrystals and crystalline spectra that also contain a few bands alluding to the composition of their silicate–phosphate glass matrix. By understanding these chemical changes induced by lightning, we can extract information from other types of glasses produced during high temperature, short duration events.

     
    more » « less