The three‐dimensional microstructure of 8% yttria‐stabilized zirconia (YSZ) was measured by electron backscatter diffraction and focused ion beam serial sectioning. The relative grain boundary energies as a function of all five crystallographic grain boundary parameters were determined based on the assumption of thermodynamic equilibrium at the internal triple junctions. Grain boundaries with (100) orientations have low energies compared to boundaries of other orientations, and all [100] twist boundaries have relatively low energies. Other classes of boundaries with lower than average energies include [100] symmetric tilt boundaries with disorientations less than 40° and [111] twist boundaries with disorientations greater than 20°. At fixed misorientations, the relative areas of boundaries are inversely correlated to the relative grain boundary energy. The results suggest that texturing microstructures to increase the relative areas of [100] twist boundaries might increase the oxygen ion conductivity of YSZ ceramics.
By mapping grain orientations on parallel serial sections of a SrTiO3ceramic, it was possible to reconstruct three‐dimensional orientation maps containing more than 3000 grains. The grain boundaries were approximated by a continuous mesh of triangles and mean curvatures were determined for each triangle. The integral mean curvatures of grain faces were determined for all grains. Small grains with fewer than 16 neighbors mostly have positive mean curvatures while larger grains with more than 16 neighbors mostly have negative mean curvatures. It is also possible to correlate the mean curvature of individual triangles with the crystallographic characteristics of the grain boundary. The mean curvature is lowest for grain boundaries with (100) orientations and highest for grain boundaries with (111) orientations. This trend is inversely correlated to the relative areas of grain boundaries and directly correlated to the relative grain boundary energy. The direct correlation between the energy and curvature is consistent with the expected behavior of grain boundaries made up of singular orientations. Furthermore, because both the relative energy and curvature of grain boundaries with (100) orientations are minima in the distributions, these boundaries also have the lowest driving force for migration.
more » « less- NSF-PAR ID:
- 10461296
- Publisher / Repository:
- Wiley-Blackwell
- Date Published:
- Journal Name:
- Journal of the American Ceramic Society
- Volume:
- 102
- Issue:
- 11
- ISSN:
- 0002-7820
- Page Range / eLocation ID:
- p. 7003-7014
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract The role of anisotropic grain boundary energy in grain growth is investigated using textured microstructures that contain a high proportion of special grain boundaries. Textured and untextured Ca‐doped alumina was prepared by slip casting inside and outside a high magnetic field, respectively. At 1600°C, the textured microstructure exhibits faster growth than the untextured microstructure and its population of low‐angle boundaries increases. Atomic force microscopy (AFM) is employed to measure the geometry of thermal grooves to assess the relative grain boundary energy of these systems before and after growth. In the textured microstructure, the grain boundary energy distribution narrows and shifts to a lower average energy. Conversely, the energy distribution broadens for the untextured microstructure as it grows and exhibits abnormal grain growth. Further analysis of the boundary networks neighboring abnormal grains reveals an energy incentive that facilitates their growth. These results suggest that coarsening is not the only dominant grain growth mechanism and that the system can lower its energy effectively by replacing high energy boundaries with those of low energy. The faster growth of lower energy boundaries suggests that isotropic simulations do not adequately account for anisotropic grain growth mechanisms or anisotropic mobility.
-
Many technologically useful materials are polycrystals composed of small monocrystalline grains that are separated by grain boundaries of crystallites with different lattice orientations. The energetics and connectivities of the grain boundaries play an essential role in defining the effective properties of materials across multiple scales. In this paper we derive a Fokker–Planck model for the evolution of the planar grain boundary network. The proposed model considers anisotropic grain boundary energy which depends on lattice misorientation and takes into account mobility of the triple junctions, as well as independent dynamics of the misorientations. We establish long time asymptotics of the Fokker–Planck solution, namely the joint probability density function of misorientations and triple junctions, and closely related the marginal probability density of misorientations. Moreover, for an equilibrium configuration of a boundary network, we derive explicit local algebraic relations, a generalized Herring Condition formula, as well as formula that connects grain boundary energy density with the geometry of the grain boundaries that share a triple junction. Although the stochastic model neglects the explicit interactions and correlations among triple junctions, the considered specific form of the noise, under the fluctuation–dissipation assumption, provides partial information about evolution of a grain boundary network, and is consistent with presented results of extensive grain growth simulations.more » « less
-
more » « less
Grain boundaries in polycrystalline materials migrate to reduce the total excess energy. It has recently been found that the factors governing migration rates of boundaries in bicrystals are insufficient to explain boundary migration in polycrystals. We first review our current understanding of the atomistic mechanisms of grain boundary migration based on simulations and high-resolution transmission electron microscopy observations. We then review our current understanding at the continuum scale based on simulations and observations using high-energy diffraction microscopy. We conclude that detailed comparisons of experimental observations with atomistic simulations of migration in polycrystals (rather than bicrystals) are required to better understand the mechanisms of grain boundary migration, that the driving force for grain boundary migration in polycrystals must include factors other than curvature, and that current simulations of grain growth are insufficient for reproducing experimental observations, possibly because of an inadequate representation of the driving force.
-
The electron reflection probability r at symmetric twin boundaries Σ3, Σ5, Σ9, and Σ11 is predicted from first principles for the eight most conductive face-centered cubic (fcc) metals. r increases with decreasing interplanar distance of atomic planes parallel to the boundary. This provides the basis for an extrapolation scheme to estimate the reflection probability r r at random grain boundaries, which is relatively small, r r = 0.28–0.39, for Cu, Ag, and Au due to their nearly spherical Fermi surfaces, but approximately two times higher for Al, Ca, Ni, Rh, and Ir with a predicted r r = 0.61–0.72. The metal resistivity in the limit of small randomly oriented grains with fixed average size is expected to be proportional to the materials benchmark quantity ρ o λ × r r /(1 − r r ), where ρ o and λ are the bulk resistivity and bulk electron mean free path, respectively. Cu has the lowest value for this quantity, indicating that all other fcc metals have a higher resistivity in the limit of small randomly oriented grains. Thus, the conductivity benefit of replacement metals for narrow Cu interconnect lines can only be realized if the grains are larger than the linewidth or exhibit symmetric orientation relationships where r < r r .more » « less
