<?xml-model href='http://www.tei-c.org/release/xml/tei/custom/schema/relaxng/tei_all.rng' schematypens='http://relaxng.org/ns/structure/1.0'?><TEI xmlns="http://www.tei-c.org/ns/1.0">
	<teiHeader>
		<fileDesc>
			<titleStmt><title level='a'>Reconfigurable Intelligent Surface (RIS) Design for 5G n260 Frequency Band</title></titleStmt>
			<publicationStmt>
				<publisher></publisher>
				<date>07/29/2023</date>
			</publicationStmt>
			<sourceDesc>
				<bibl> 
					<idno type="par_id">10465816</idno>
					<idno type="doi">10.1109/EMCSIPI50001.2023.10241407</idno>
					<title level='j'>2023 IEEE Symposium on Electromagnetic Compatibility &amp; Signal/Power Integrity (EMC+SIPI)</title>
<idno></idno>
<biblScope unit="volume"></biblScope>
<biblScope unit="issue"></biblScope>					

					<author>Reza Yazdani</author><author>Manish Kizhakkeveettil Mathew</author><author>Zhekun Peng</author><author>DongHyun Kim</author>
				</bibl>
			</sourceDesc>
		</fileDesc>
		<profileDesc>
			<abstract><ab><![CDATA[In this paper, a new low profile reconfigurable intelligent surface design with high resolution steering reflector and wide frequency band width is proposed at n260 frequency band, used for 5G new radio applications. The dynamic reflection phase and tunability is realized by integrating of varactor diode with each unit cell. This study presents design procedures, reflection simulation verifications, and the effects of important parameters on the performance of the proposed novel resonant unit cell. The proposed unit cell offers a dynamic reflection phase range of more than 270• at a wide frequency bandwidth. Simulation results of beam steering capability in horizontal plane at 38 GHz is presented to verify the design performance of the RIS.]]></ab></abstract>
		</profileDesc>
	</teiHeader>
	<text><body xmlns="http://www.tei-c.org/ns/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xlink="http://www.w3.org/1999/xlink">
<div xmlns="http://www.tei-c.org/ns/1.0"><head>INTRODUCTION</head><p>Fifth generation (5G) wireless communication system is increasing popular research topic in academia and industry due to the rapid growth in mobile data usage and number of Internet of Things (IoT) in the market. To fulfill the user demands, the specifications of the 5G wireless network requires increase effectiveness and power than its previous generations <ref type="bibr">[1]</ref>. To reach high bandwidth, the next generation of mobile communications is designed to work at millimeterwave (mmWave) frequency or even at terahertz frequency <ref type="bibr">[2]</ref>, thus the attenuation issue in such high frequency bands will increase at the same distance, the signal quality degradation will be severe. The quality of service (QoS) can be easily deteriorated by simple obstacles such as wall, furniture, or a person between the transmitter and receiver <ref type="bibr">[3]</ref><ref type="bibr">[4]</ref><ref type="bibr">[5]</ref>.</p><p>Reconfigurable intelligent surface (RIS) is one of the promising technologies that can improve the attenuation issue <ref type="bibr">[6,</ref><ref type="bibr">7]</ref>. By changing the phase, amplitude, frequency, or polarization of the incident EM wave RIS can adaptively reconfigure the wireless environment without active user input <ref type="bibr">[8]</ref>. When there is not a direct line of sight between the transmitter and receiver due to obstacles between them or when the channel quality between the transmitter and receiver is too lossy the RIS can be applied to provide an alternative path or to enhance the quality, respectively. Therefore, the main objective of RIS is to deliberately and deterministically control the propagation environment to improve the signal quality at the receiver <ref type="bibr">[9]</ref>. A dominant feature of RISs is, therefore, to provide a propagation path when no line of sight (LoS) exists due to their unique ability to be reconfigurable after their deployment in a wireless environment.</p><p>In comparison to other related technologies which are currently used in wireless networks, including MIMO relaying, beamforming, and backscatter communications, RISs are different. Major difference is that RIS do not need any active elements such as radio frequency (RF) chains to reflect, focus, steer, or scatter the incident EM wave, and they are passive elements. This characteristic makes an RIS substantially low cost with less mechanical and electrical complexity, and low power consumption compared to their counterparts such as phased array antenna or relay <ref type="bibr">[4]</ref>. RIS includes hundreds of unit cells each of which are able to shape the incident wave and reflect it to the desired location or receiver. Therefore, unit cell plays an important role in the final RIS design. As RIS does not need analog-todigital/digital-to-analog converters, and power amplifiers, and it is not affected by receiver noise. Consequently, they do not introduce any additional noise to the communication link <ref type="bibr">[3]</ref>. RIS can work at a wide range of frequencies, and they have a full-band response. By applying controllable elements such as diodes the state of RIS can be changed, and one can steer the main beam of the reflected wave <ref type="bibr">[10,</ref><ref type="bibr">12]</ref>. As shown in Fig. <ref type="figure">1</ref>, simplicity and low profile make the RIS an easy structure to simply attached them to walls or ceilings of indoor environments to boost the signal quality (Fig. <ref type="figure">1</ref>). </p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>II. UNIT CELL DESIGN</head><p>The single unit cell (or pixel) of the designed RIS is represented by a conducting square patch (made of copper) placed on a low loss grounded dielectric substrate ROGERS RT5880 (&#949; = 2.2, tan(&#948;) = 0.0009 @ 10 GHz). The upper patch receives and radiates energy, while the ground plane suppresses the back radiation. The top and front view of the proposed unit cell is shown in Fig. <ref type="figure">2</ref>. The top copper layer has two vertical strips which are connected to horizontal conductor pads designed as per the varactor layout. From Fig. <ref type="figure">2</ref>(a) it can be seen that slots were used on each vertical strips to get the desired frequency range. The varactor used in this unit cell is the MAVR-011020-1411 model manufactured by MACOM which provides extremely low capacitance. <ref type="bibr">[13]</ref>. The left strip is shorted by via to the metal ground. Since the varactor is placed in between the unit cells, it will provide a variable capacitance Cd to the unit cell. This varactor model has a dynamic capacitance range of = 0.22 pF and =0.033pF for a reverse bias voltage of 0-15 V, respectively. The proposed unit cell is simulated using the TEM Floquet port with CST microwave studio simulation software, and its parameter values (see Table <ref type="table">1</ref>) are obtained after optimization. The unit cell is designed to provide the patch resonance frequency (f0 )to be approximately around 38 GHz. By using single layer and one diode in each unit cell in compare with <ref type="bibr">[14]</ref> which has two substrate layer and two diodes for each unit cell, the proposed method is able to introduce a costeffective and low profile structure for the final RIS fabrication.</p><p>It is worth mentioning that the internal inductance ( ) and capacitance ( ) of the unit cell is determined by the factors like unit cell geometry, tunable element property, materials, and the PCB manufacturing process. The unit cell resonates at a frequency given by,</p><p>Here, a varactor is considered as the tunable element to change the capacitance of the unit cell, thereby varying the resonance frequency. The and are proportional to the surface area of the unit cell and the thickness of the substrate, respectively. So, the total capacitance and inductance of the unit cell will be C= + and L= , where is the variable capacitance provided by the varactor diode for different dc bias voltages. It can be inferred that a smaller LC product yield a higher resonance frequency. It is difficult to vary the inductance of the unit cell. The advantage of choosing capacitance as the tunable element is that the capacitance is directly proportional to the Q factor and unit cell absorption. </p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>A. Fullwave Simulation Results:</head><p>The reflection coefficient of the unit cell for a normal incidence of a wave as a function of frequency was simulated by varying the capacitance of the varactor using a linear parametric sweep from to . It is clear from Fig. <ref type="figure">3</ref> that the unit cell is resonating in the frequency range from 31.5 GHz to 39.5 GHz for the maximum and minimum capacitance provided by the varactor diodes while they are biased by a 0V and 15 V respectively. This provided a dynamic reflection phase range of 270&#8226;. As shown in Fig. <ref type="figure">3</ref>(a) this parameter is highly related to the capacitance range of the varactor diode, and one can improve the dynamic reflection phase of the unit cell by using a diode with larger capacitance range.</p><p>The via was used for the DC bias for the varactor diode. The standard via diameter for manufacturing is 0.25 mm-0.30 mm, which had no effect on the unit cell's performance. </p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>B. Parameter Analysis:</head><p>To analyze the different tunable parameters' effect on the reflection coefficient, a parametric study is done in the CST microwave studio. During this study, the capacitance value was fixed to 0.033 pF and the effect of the important parameters that have considerably effect on the performance of the unit cell including width, substrate height, gaps G1 and G2 are studied.</p><p>As shown in Fig. <ref type="figure">4</ref> by increasing W the resonant frequency decreases from 38.5GHz to 37.5GHz. Changing the height of the substrate has negligible effect on the resonant frequency, but as it can be seen from Fig. <ref type="figure">5</ref>(a) increasing the height to 1 mm can significantly decrease the loss of the incident wave. Therefore, to reach to the minimum loss the optimum value for H is 1mm. In next step the gap inside the vertical strips was swept from 0.1mm to 0.5 mm. From Fig. <ref type="figure">6</ref> it is clear that by decreasing this gap from 0.5mm to 0.1 mm we are able to decrease the loss for about 0.5dB. An array with 20 rows and 16 columns, having a total of 320 unit cells is designed to realize the RIS. The total dimension of the final RIS is 4875.2 mm. To operate, a RIS is required to modify the phase of the reflected wave in comparison to the incident wave and not to dissipate all the incident power. The steering angle &#952; is achieved by the gradual accumulation of phase difference &#916;&#966; between each column of the RIS array. The beam steering angle &#952; is related to &#916;&#966;, operating wavelength &#955;, and array constant &#916;X <ref type="bibr">[14]</ref>.</p><p>Where &#916;X is the length of the unit cell.</p><p>A phase calibration curve of the reflection phase to the varactor capacitance at 34 GHz is obtained by post-processing the reflection phase to frequency swept through the maximum and minimum varactor capacitance values (see Fig. <ref type="figure">9</ref>).</p></div>
<div xmlns="http://www.tei-c.org/ns/1.0"><head>Fig. 9. Simulation results of the varactor diode capacitance versus phase variation</head><p>Therefore, the appropriate dc bias voltage that needs to be provided to each column to achieve a required phase difference &#916;&#966; can be extracted from the phase calibration curve. Therefore, each column of the RIS with specific applied voltage become capable of re-radiating an electromagnetic field having a specific phase state. Hence, the desired electronic phase control capability is realized without using conventional phase shifters. To show the beam steering capability the RIS structure is simulated in the CST microwave studio. As can be seen from Fig. <ref type="figure">10</ref>. the main lobe radiation pattern of the proposed RIS structure is properly steered in the horizontal plane toward the user side. In this study, a novel unit cell is introduced to use in the RIS design, and it can fully cover the n260 frequency band, which is one of the promising bands for 5G communication applications. In compare with the previous works by decreasing the number of layers and diodes the proposed unit cell introduced a low profile and cost-effective solution for the RIS design. A varactor diode with a variable capacitance is used to realize a 270&#8226; dynamic reflection phase. The simulation results successfully demonstrate the highefficiency beamforming capability and electronic phase shifting.</p></div><note xmlns="http://www.tei-c.org/ns/1.0" place="foot" n="2023" xml:id="foot_0"><p>IEEE Symposium on Electromagnetic Compatibility &amp; Signal/Power Integrity (EMC+SIPI) | 979-8-3503-0976-8/23/$31.00 &#169;2023 IEEE | DOI: 10.1109/EMCSIPI50001.2023.10241407</p></note>
		</body>
		</text>
</TEI>
