skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: A Novel Bio-Adhesive Mesh System for Medical Implant Applications: In Vivo Assessment in a Rabbit Model
Injectable surgical sealants and adhesives, such as biologically derived fibrin gels and synthetic hydrogels, are widely used in medical products. While such products adequately adhere to blood proteins and tissue amines, they have poor adhesion with polymer biomaterials used in medical implants. To address these shortcomings, we developed a novel bio-adhesive mesh system utilizing the combined application of two patented technologies: a bifunctional poloxamine hydrogel adhesive and a surface modification technique that provides a poly-glycidyl methacrylate (PGMA) layer grafted with human serum albumin (HSA) to form a highly adhesive protein surface on polymer biomaterials. Our initial in vitro tests confirmed significantly improved adhesive strength for PGMA/HSA grafted polypropylene mesh fixed with the hydrogel adhesive compared to unmodified mesh. Toward the development of our bio-adhesive mesh system for abdominal hernia repair, we evaluated its surgical utility and in vivo performance in a rabbit model with retromuscular repair mimicking the totally extra-peritoneal surgical technique used in humans. We assessed mesh slippage/contraction using gross assessment and imaging, mesh fixation using tensile mechanical testing, and biocompatibility using histology. Compared to polypropylene mesh fixed with fibrin sealant, our bio-adhesive mesh system exhibited superior fixation without the gross bunching or distortion that was observed in the majority (80%) of the fibrin-fixed polypropylene mesh. This was evidenced by tissue integration within the bio-adhesive mesh pores after 42 days of implantation and adhesive strength sufficient to withstand the physiological forces expected in hernia repair applications. These results support the combined use of PGMA/HSA grafted polypropylene and bifunctional poloxamine hydrogel adhesive for medical implant applications.  more » « less
Award ID(s):
1655740
PAR ID:
10474283
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
MDPI
Date Published:
Journal Name:
Gels
Volume:
9
Issue:
5
ISSN:
2310-2861
Page Range / eLocation ID:
372
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract Additive manufacturing (AM) of medical devices such as orthopedic implants and hearing aids is highly attractive because of the potential of AM to match the complex form and mechanics of individual human bodies. Externally worn and implantable tissue‐support devices, such as ankle or knee braces, and hernia repair mesh, offer a new opportunity for AM to mimic tissue‐like mechanics and improve both patient outcomes and comfort. Here, it is demonstrated how explicit programming of the toolpath in an extrusion AM process can enable new, flexible mesh materials having digitally tailored mechanical properties and geometry. Meshes are fabricated by extrusion of thermoplastics, optionally with continuous fiber reinforcement, using a continuous toolpath that tailors the elasticity of unit cells of the mesh via incorporation of slack and modulation of filament–filament bonding. It is shown how the tensile mesh mechanics can be engineered to match the nonlinear response of muscle. An ankle brace with directionally specific inversion stiffness arising from embedded mesh is validated, and further concepts for 3D mesh devices are prototyped. 
    more » « less
  2. ; ; ; (, Biomaterials Science)
    null (Ed.)
    The success of skin tissue engineering for deep wound healing relies predominantly on the design of innovative and effective biomaterials. This study reports the synthesis and characterization of a new type of naturally-derived and macroporous interpenetrating polymer network (IPN) for skin repair. These biomaterials consist of a biologically active fibrous fibrin network polymerized within a mechanically robust and macroporous construct made of polyethylene glycol and biodegradable serum albumin (PEGDM- co -SAM). First, mesoporous PEGDM- co -SAM hydrogels were synthesized and subjected to cryotreatment to introduce an interconnected macroporous network. Subsequently, fibrin precursors were incorporated within the cryotreated PEG-based network and then allowed to spontaneously polymerize and form a sequential IPN. Rheological measurements indicated that fibrin-based sequential IPN hydrogels exhibited improved and tunable mechanical properties when compared to fibrin hydrogels alone. In vitro data showed that human dermal fibroblasts adhere, infiltrate and proliferate within the IPN constructs, and were able to secrete endogenous extracellular matrix proteins, namely collagen I and fibronectin. Furthermore, a preclinical study in mice demonstrated that IPNs were stable over 1-month following subcutaneous implantation, induced a minimal host inflammatory response, and displayed a substantial cellular infiltration and tissue remodeling within the constructs. Collectively, these data suggest that macroporous and mechanically reinforced fibrin-based sequential IPN hydrogels are promising three-dimensional platforms for dermal tissue regeneration. 
    more » « less
  3. ; ; ; ; ; (, Advanced Healthcare Materials)
    Abstract Implanted cell‐containing grafts require a robust and functional vasculature to supply oxygen and nutrients, as well as clear metabolic waste products. However, it remains challenging to fabricate tunable, vascular‐promoting scaffolds without incorporating additional biologics. Here, a biphasic gel consisting of a highly porous aerogel and a degradable fibrin hydrogel for inducing vascularization is presented. The highly porous (>90%) and stable aerogel is assembled from short microfibers by being dispersed in an aqueous solution that can be 3D printed into various configurations. The biphasic gel demonstrates good compression‐resistance: 70.30% Young's modulus is recovered over 20 cycles of 65% compression under water. Furthermore, it is confirmed that tissue cells and blood vessels can penetrate a thick (≈3 mm) biphasic gel in the subcutaneous space of mice. Finally, the biphasic gel doubles the vascular ingrowth compared to a composite of a commercial surgical polyester felt and a fibrin hydrogel upon subcutaneous implantation in mice after 4 weeks. The design of this biphasic gel may advance the development of vascularized scaffolds. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract 3D bioprinting additively assembles bio‐inks to manufacture tissue‐mimicking biological constructs, but with the typical building blocks limited to 1D filaments. Here, it is developed a voxelated bioprinting technique for the digital assembly of spherical particles (DASP), which are effectively 0D voxels—the basic unit of 3D structures. It is shown that DASP enables on‐demand generation, deposition, and assembly of viscoelastic bio‐ink droplets. A two‐parameter diagram is developed to outline the viscoelasticity of bio‐inks required for printing spherical particles of good fidelity. Moreover, a strategy is developed for engineering bio‐inks with independently controllable viscoelasticity and mesh size, two of the most important yet intrinsically coupled physical properties of biomaterials. Using DASP, mechanically robust, multiscale porous scaffolds composed of interconnected yet distinguishable hydrogel particles are created. Finally, it is demonstrated the application of the scaffolds in encapsulating human pancreatic islets for sustained responsive insulin release. Together with the knowledge of bio‐ink design, DASP might be used to engineer highly heterogeneous, yet tightly organized tissue constructs for therapeutic applications. 
    more » « less
  5. ; ; ; ; ; (, Polymers)
    Adhesive hydrogels with tunable mechanical properties and strong adhesion to wet, dynamic tissues have emerged as promising materials for tissue repair, with potential applications in wound closure, hemorrhage control, and surgical adhesives. This review highlights the key design principles, material classifications, and recent advances in adhesive hydrogels designed for vascular repair. The limitations of existing adhesive hydrogels, including insufficient mechanical durability, suboptimal biocompatibility, and challenges in targeted delivery, are critically evaluated. Furthermore, innovative strategies—such as incorporating self-healing capabilities, developing stimuli-responsive systems, integrating functional nanocomposites, and employing advanced fabrication techniques like 3D bioprinting—are discussed to enhance adhesion, mechanical stability, and vascular tissue regeneration. While significant progress has been made, further research and optimization are necessary to advance these materials toward clinical translation, offering a versatile and minimally invasive alternative to traditional vascular repair techniques. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email