Increased consumer interest in healthy‐looking skin demands a safe and effective method to increase transdermal absorption of innovative therapeutic cosmeceuticals. However, permeation of small‐molecule drugs is limited by the innate barrier function of the stratum corneum. Here, a conformable ultrasound patch (cUSP) that enhances transdermal transport of niacinamide by inducing intermediate‐frequency sonophoresis in the fluid coupling medium between the patch and the skin is reported. The cUSP consists of piezoelectric transducers embedded in a soft elastomer to create localized cavitation pockets (0.8 cm2, 1 mm deep) over larger areas of conformal contact (20 cm2). Multiphysics simulation models, acoustic spectrum analysis, and high‐speed videography are used to characterize transducer deflection, acoustic pressure fields, and resulting cavitation bubble dynamics in the coupling medium. The final system demonstrates a 26.2‐fold enhancement in niacinamide transport in a porcine model in vitro with a 10 min ultrasound application, demonstrating the suitability of the device for short‐exposure, large‐area application of sonophoresis for patients and consumers suffering from skin conditions and premature skin aging.
Conformable electronics are regarded as the next generation of personal healthcare monitoring and remote diagnosis devices. In recent years, piezoelectric‐based conformable ultrasound electronics (cUSE) have been intensively studied due to their unique capabilities, including nonradiative monitoring, soft tissue imaging, deep signal decoding, wireless power transfer, portability, and compatibility. This review provides a comprehensive understanding of cUSE for use in biomedical and healthcare monitoring systems and a summary of their recent advancements. Following an introduction to the fundamentals of piezoelectrics and ultrasound transducers, the critical parameters for transducer design are discussed. Next, five types of cUSE with their advantages and limitations are highlighted, and the fabrication of cUSE using advanced technologies is discussed. In addition, the working function, acoustic performance, and accomplishments in various applications are thoroughly summarized. It is noted that application considerations must be given to the tradeoffs between material selection, manufacturing processes, acoustic performance, mechanical integrity, and the entire integrated system. Finally, current challenges and directions for the development of cUSE are highlighted, and research flow is provided as the roadmap for future research. In conclusion, these advances in the fields of piezoelectric materials, ultrasound transducers, and conformable electronics spark an emerging era of biomedicine and personal healthcare.
more » « less- Award ID(s):
- 2044688
- NSF-PAR ID:
- 10479341
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Ultrasound is a safe, noninvasive diagnostic technique used to measure internal structures such as tissues, organs, and arterial and venous blood flow. Skin‐mounted wearable ultrasound devices can enable long‐term continuous monitoring of patients to provide solutions to critical healthcare needs. However, stretchable ultrasound devices that are composed of ultrasonic transducers embedded in an elastomer matrix are incompatible with existing rigid acoustic matching layers, leading to reduced energy transmission and reduced imaging resolution. Here, a systematic study of soft composites with liquid metal (LM) fillers dispersed in elastomers reveals key strategies to tune the acoustic impedance of soft materials. Experiments supported by theoretical models demonstrate that the increase in acoustic impedance is primarily driven by the increase in density with negligible changes to the speed of sound through the material. By controlling the volume loading and particle size of the LM fillers, a material is created that achieves a high acoustic impedance 4.8 Mrayl, (> 440% increase over the polymer matrix) with low modulus (< 1 MPa) and high stretchability (> 100% strain). When the device is mechanically strained, a small decrease is observed in acoustic impedance (< 15%) with negligible decrease in sound transmittance and impact on attenuation for all droplet sizes. The stretchable acoustic matching layer is then integrated with a wearable ultrasound device and the ability to measure motion is demonstrated using a phantom model as is performed in Doppler ultrasound.
-
more » « less
Abstract Photoacoustic spectroscopy (PAS) is a boomingly developed spectroscopic method for trace gas analysis in the past decades. Unlike traditional laser absorption spectroscopy, an acoustic transducer is employed to detect the acoustic waves instead of optical waves. Microphone is a commonly used transducer to convert the acoustic signal into electrical signal, which is related to the gas concentration. In recent years, piezoelectric materials are playing important roles in the acoustic‐to‐electrical conversion process of photoacoustic system. In this article, recently used transducers in PAS such as quartz tuning fork, polyvinylidene fluoride, lead zirconate titanate, electromechanical film and LiNbO3, BiB3O6, NbCOB crystals are summarized and discussed in detail. The different spectrophone configuration, schematic diagram, and experimental system are reported. Side by side comparison is carried out to show the gas sensing performance of these piezoelectric transducers.
-
more » « less
Abstract Retinal electrical stimulation for people with neurodegenerative diseases has shown to be feasible for direct excitation of neurons as a means of restoring vision. In this work, a new electrical stimulation strategy is proposed using ultrasound‐driven wireless energy harvesting technology to convert acoustic energy to electricity through the piezoelectric effect. The design, fabrication, and performance of a millimeter‐scale flexible ultrasound patch that utilizes an environment‐friendly lead‐free piezocomposite are described. A modified dice‐and‐fill technique is used to manufacture the microstructure of the piezocomposite and to generate improved electrical and acoustic properties. The as‐developed device can be attached on a complex surface and be driven by ultrasound to produce adjustable electrical outputs, reaching a maximum output power of 45 mW cm−2. Potential applications for charging energy storage devices and powering commercial electronics using the device are demonstrated. The considerable current signals (e.g., current >72 µA and current density >9.2 nA µm−2) that are higher than the average thresholds of retinal stimulation are also obtained in the ex vivo experiment of an implanted environment, showing great potential to be integrated on implanted biomedical devices for electrical stimulation application.
-
more » « less
Abstract Sound can exert forces on objects of any material and shape. This has made the contactless manipulation of objects by intense ultrasound a fascinating area of research with wide-ranging applications. While much is understood for acoustic forcing of individual objects, sound-mediated interactions among multiple objects at close range gives rise to a rich set of structures and dynamics that are less explored and have been emerging as a frontier for research. We introduce the basic mechanisms giving rise to sound-mediated interactions among rigid as well as deformable particles, focusing on the regime where the particles’ size and spacing are much smaller than the sound wavelength. The interplay of secondary acoustic scattering, Bjerknes forces, and micro-streaming is discussed and the role of particle shape is highlighted. Furthermore, we present recent advances in characterizing non-conservative and non-pairwise additive contributions to the particle interactions, along with instabilities and active fluctuations. These excitations emerge at sufficiently strong sound energy density and can act as an effective temperature in otherwise athermal systems.
