skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Spatiotemporal evaluation of Rayleigh surface wave estimated from roadside dark fiber DAS array and traffic noise
Seismic imaging and monitoring of the near-surface structure are crucial for the sustainable development of urban areas. However, standard seismic surveys based on cabled or autonomous geophone arrays are expensive and hard to adapt to noisy metropolitan environments. Distributed acoustic sensing (DAS) with pre-existing telecom fiber optic cables, together with seismic ambient noise interferometry, have the potential to fulfill this gap. However, a detailed noise wavefield characterization is needed before retrievingcoherent waves from chaotic noise sources. We analyze local seismic ambient noise by tracking five-month changes in signal-to-noise ratio (SNR) of Rayleigh surface wave estimated from traffic noise recorded by DAS along the straight university campus busy road. We apply the seismic interferometry method to the 800 m long part of the Penn State Fiber-Optic For Environment Sensing (FORESEE) array. We evaluate the 160 virtual shot gathers (VSGs) by determining the SNR using the slant-stack technique. We observe strong SNR variations in time and space. We notice higher SNR for virtual source points close to road obstacles. The spatial noise distribution confirms that noise energy focuses mainly on bumps and utility holes. We also see the destructive impact of precipitation, pedestrian traffic, and traffic along main intersections on VSGs. A similar processing workflow can be applied to various straight roadside fiber optic arrays in metropolitan areas.  more » « less
Award ID(s):
2034363
PAR ID:
10481347
Author(s) / Creator(s):
; ;
Publisher / Repository:
McGill Library Scholarly Publishing
Date Published:
Journal Name:
Seismica
Volume:
2
Issue:
2
ISSN:
2816-9387
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Journal of Geophysical Research: Solid Earth)
    Abstract Distributed Acoustic Sensing (DAS) is an emerging technology that converts optical fibers into dense arrays of strainmeters, significantly enhancing our understanding of earthquake physics and Earth's structure. While most past DAS studies have focused primarily on seismic wave phase information, accurate measurements of true ground motion amplitudes are crucial for comprehensive future analyses. However, amplitudes in DAS recordings, especially for pre‐existing telecommunication cables with uncertain fiber‐ground coupling, have not been fully quantified. By calibrating three DAS arrays with co‐located seismometers, we systematically evaluate DAS amplitudes. Our results indicate that the average DAS amplitude of earthquake signals closely matches that of co‐located seismometer data across frequencies from 0.01 to 10 Hz. The noise floor of DAS is comparable to that of strong‐motion stations but higher than that of broadband stations. The saturation amplitude of DAS is adjustable by modifying the pulse repetition rate and gauge length. We also demonstrate how our findings enhance the understanding of fiber‐optic seismology and its implications for natural hazard mitigation and Earth structure imaging and monitoring. Specifically, our results suggest that with proper settings, DAS can detectP‐waves from an M6+ earthquake occurring 10 km from the cable without saturation, indicating its viability for earthquake early warning. Through quantitative comparison and analysis, we also find that local ambient traffic noise levels strongly affect the quality of seismic interferometry measurement, which is a powerful tool for near‐surface imaging and monitoring. Our methodology and findings are valuable for future DAS experiments that require precise seismic amplitude measurements. 
    more » « less
  2. ; ; ; ; ; (, Bulletin of the Seismological Society of America)
    ABSTRACT Distributed acoustic sensing (DAS) technology is an emerging field of seismic sensing that enables recording ambient noise seismic data along the entire length of a fiber-optic cable at meter-scale resolution. Such a dense spatial resolution of recordings over long distances has not been possible using traditional methods because of limited hardware resources and logistical concerns in an urban environment. The low spatial resolution of traditional passive seismic acquisition techniques has limited the accuracy of the previously generated velocity profiles in many important urban regions, including the Reno-area basin, to the top 100 m of the underlying subsurface. Applying the method of seismic interferometry to ambient noise strain rate data obtained from a dark-fiber cable allows for generating noise cross correlations, which can be used to infer shallow and deep subsurface properties and basin geometry. We gathered DAS ambient noise seismic data for this study using a 12 km portion of a dark-fiber line in Reno, Nevada. We used gathered data to generate and invert dispersion curves to estimate the near-surface shear-wave velocity structure. Comparing the generated velocity profiles with previous regional studies shows good agreement in determining the average depth to bedrock and velocity variations in the analyzed domain. A synthetic experiment is also performed to verify the proposed framework further and better understand the effect of the infrastructural cover along the cable. The results obtained from this research provide insight into the application of DAS using dark-fiber lines in subsurface characterization in urban environments. It also discusses the potential effects of the conduit that covers such permanent fiber installations on the produced inversion results. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Seismological Research Letters)
    Abstract Distributed acoustic sensing (DAS) provides dense arrays ideal for seismic tomography. However, DAS only records average axial strain change along the cable, which can complicate the interpretation of surface-wave observations. With a rectangular DAS array located in the City of Oxnard, California, we compare phase velocity dispersion at the same location illuminated by differently oriented virtual sources. The dispersion curves are consistent for colinear and noncolinear virtual sources, suggesting that surface-wave observations in most of the cross-correlations are dominated by Rayleigh waves. Our measurements confirm that colinear channel pairs provide higher Rayleigh-wave signal-to-noise ratio (SNR). For cross-correlations of noncolinear channel pairs, the travel time of each connecting ray path can still be obtained despite the lower SNR of Rayleigh wave signals. The inverted Rayleigh-wave dispersion map reveals an ancient river channel consistent with the local geologic map. Our results demonstrate the potential of DAS-based 2D surface-wave tomography without special treatment of directional sensitivity in areas where one type of wave is dominating or can be identified. 
    more » « less
  4. ; (, Journal of Geophysical Research: Solid Earth)
    Abstract Urban karst geology poses significant geohazard risks, most notably sinkholes and surface depression stemming from soluble and fractured bedrock that is prone to dissolution and collapse. However, mapping and characterizing these hazards using traditional geophysical surveys in cities is challenging due to dense infrastructure and high levels of human activity. In this work, we demonstrate how distributed acoustic sensing (DAS), deployed via preexisting telecommunication fiber‐optic cables, can be leveraged to detect fractured weak zones in a populated setting. By recording traffic noises, we are able to conduct large‐scale, cost‐effective, and minimally intrusive subsurface investigations. Our workflow integrates ambient noise interferometry with advanced signal enhancement techniques, specifically frequency‐wavenumber (F‐K) filtering and bin‐offset stacking. F‐K filtering isolates wavefields traveling in opposite directions to suppress localized noise, while bin‐offset stacking further enhances signal coherency by superposing channels with common offsets. The resulting Noise Cross‐correlation Functions exhibit unique inverse‐dispersion patterns that signify the presence of leaky surface waves generated by a low‐velocity half‐space. We invert the corresponding dispersion curves to derive a 2D S‐wave velocity model, highlighting a prominent low‐velocity anomaly indicative of a fractured zone. To confirm the karstic nature of this anomaly, rock physics modeling is employed to estimate spatial variations in fracture density, revealing marked heterogeneity in the fractured zone. Our findings underscore the power of DAS‐based ambient noise interferometry for delineating karst features and diagnosing potential sinkhole risks in urban environments. By exploiting widely available fiber‐optic networks, this approach significantly broadens the practicality of near‐surface geohazard mapping at the city scale. 
    more » « less
  5. ; ; ; ; (, Geophysical Journal International)
    SUMMARY The Granada Basin in southeast Spain is an area of moderate seismicity. Yet, it hosts some of the highest seismic hazards in the Iberian Peninsula due to the presence of shallow soft sediments amplifying local ground motion. In urban areas, seismic measurements often suffer from sparse instrumentation. An enticing alternative to conventional seismometers is the distributed acoustic sensing (DAS) technology that can convert fibre-optic telecommunication cables into dense arrays of seismic sensors. In this study, we perform a shallow structure analysis using the ambient seismic field interferometry method. We conduct a DAS array field test in the city of Granada on the 26 and 27 August 2020, using a telecommunication fibre. In addition to the existing limitations of using DAS with unknown fibre-ground coupling conditions, the complex geometry of the fibre and limited data recording duration further challenge the extraction of surface-wave information from the ambient seismic field in such an urban environment. Therefore, we develop a processing scheme that incorporates a frequency–wavenumber (f−k) filter to enhance the quality of the virtual shot gathers and related multimode dispersion images. We are able to use this data set to generate several shear-wave velocity (VS) profiles for different sections of the cable. The shallow VS structure shows a good agreement with different geological conditions of soil deposits. This study demonstrates that DAS could provide insights into soil characterization and seismic microzonation in urban areas. In addition, the results contribute to a better understanding of local site response to ground motion. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email