More Like this

1. Recent Advances in In Vivo Neurochemical Monitoring

   https://doi.org/10.3390/mi12020208  

   Tan, Chao; Robbins, Elaine M.; Wu, Bingchen; Cui, Xinyan Tracy (February 2021, Micromachines)

   null (Ed.)

   The brain is a complex network that accounts for only 5% of human mass but consumes 20% of our energy. Uncovering the mysteries of the brain’s functions in motion, memory, learning, behavior, and mental health remains a hot but challenging topic. Neurochemicals in the brain, such as neurotransmitters, neuromodulators, gliotransmitters, hormones, and metabolism substrates and products, play vital roles in mediating and modulating normal brain function, and their abnormal release or imbalanced concentrations can cause various diseases, such as epilepsy, Alzheimer’s disease, and Parkinson’s disease. A wide range of techniques have been used to probe the concentrations of neurochemicals under normal, stimulated, diseased, and drug-induced conditions in order to understand the neurochemistry of drug mechanisms and develop diagnostic tools or therapies. Recent advancements in detection methods, device fabrication, and new materials have resulted in the development of neurochemical sensors with improved performance. However, direct in vivo measurements require a robust sensor that is highly sensitive and selective with minimal fouling and reduced inflammatory foreign body responses. Here, we review recent advances in neurochemical sensor development for in vivo studies, with a focus on electrochemical and optical probes. Other alternative methods are also compared. We discuss in detail the in vivo challenges for these methods and provide an outlook for future directions. 

   more » « less
2. Dynamic Fluid‐Assisted Continuous Multimaterial 3D Printing for Seamless Gradient Structures

   https://doi.org/10.1002/admt.202500621  

   Wang, Wenbo; Liu, Siying; Liu, Luyang; Ma, Xukun; Nogueira, Cauê; Xu, Xin; Shefi, Orit; Lancaster, Jessica; Chen, Xiangfan (April 2025, Advanced Materials Technologies)

   Abstract Functionally gradient materials emulate nature's ability to seamlessly blend properties through variations in material composition, unlocking advanced engineering applications such as biomedical devices and high‐performance composites. Additive manufacturing, particularly stereolithography, enables sophisticated 3D geometries with diverse materials. However, current stereolithography‐based multi‐material 3D printing is constrained by time‐intensive material switching and compromised interfacial properties. To overcome these challenges, we present dynamic fluid‐assisted micro continuous liquid interface production (DF‐µCLIP), a high‐speed multi‐material 3D printing platform that integrates varying compositions in a fully continuous fashion. By utilizing the polymerization‐free “dead zone”, vliquid resins are seamlessly replenished within a resin bath equipped with dynamic fluidic channels and a synchronized material supply system. DF‐µCLIP achieves ultra‐fast printing speeds of 90 mm/hour with 7.4 µ m pixel‐1 resolution while enabling on‐the‐fly material transitions. This strategy enhances mechanical strength at multi‐material interface through entangled polymer networks and promotes seamless material transitions between distinct materials ilike fragile hydrogels and rigid polymers, addressing interfacial failure caused by mismatch of swelling behavior. Additionally, dynamic material replenishment with real‐time composition control enables continuous gradient printing instead of the conventional step‐wise controlled gradient. Demonstrations include polymers with gradient color transitions and gradient carbon nanotube (CNT) composites with seamlessly varying conductivity. 

   more » « less
3. Review—Recent Advances in FSCV Detection of Neurochemicals via Waveform and Carbon Microelectrode Modification

   https://doi.org/10.1149/1945-7111/ac0064  

   Rafi, Harmain; Zestos, Alexander G. (May 2021, Journal of The Electrochemical Society)

   Fast scan cyclic voltammetry (FSCV) is an analytical technique that was first developed over 30 years ago. Since then, it has been extensively used to detect dopamine using carbon fiber microelectrodes (CFMEs). More recently, electrode modifications and waveform refinement have enabled the detection of a wider variety of neurochemicals including nucleosides such as adenosine and guanosine, neurotransmitter metabolites of dopamine, and neuropeptides such as enkephalin. These alterations have facilitated the selectivity of certain biomolecules over others to enhance the measurement of the analyte of interest while excluding interferants. In this review, we detail these modifications and how specializing CFME sensors allows neuro-analytical researchers to develop tools to understand the neurochemistry of the brain in disease states and provide groundwork for translational work in clinical settings. 

   more » « less
4. Intrinsic exchange bias from interfacial reconstruction in an epitaxial Ni _x Co _y Fe _{3− x −y} O ₄ (111)/ $\alpha$ -Al ₂ O ₃ (0001) thin film family

   https://doi.org/10.1088/1361-648X/ad789d  

   Yang, Detian; Liu, Yaohua; Xu, Xiaoshan (September 2024, Journal of Physics: Condensed Matter)

   Abstract Intrinsic exchange bias is known as the unidirectional exchange anisotropy that emerges in a nominally single-component ferro-(ferri-)magnetic system. In this work, with magnetic and structural characterizations, we demonstrate that intrinsic exchange bias is a general phenomenon in (Ni, Co, Fe)-based spinel oxide films deposited on $\alpha$-Al₂O₃(0001) substrates, due to the emergence of a rock-salt interfacial layer consisting of antiferromagnetic CoO from interfacial reconstruction. We show that in Ni_xCo_yFe_3−x−yO₄(111)/ $\alpha$-Al₂O₃(0001) films, intrinsic exchange bias and interfacial reconstruction have consistent dependences on Co concentrationy, while the Ni and Fe concentration appears to be less important. This work establishes a family of intrinsic exchange bias materials with great tunability by stoichiometry and highlights the strategy of interface engineering in controlling material functionalities. 

   more » « less
5. T-linear resistivity from magneto-elastic scattering: Application to PdCrO ₂

   https://doi.org/10.1073/pnas.2305609120  

   Mendez-Valderrama, J. F.; Tulipman, Evyatar; Zhakina, Elina; Mackenzie, Andrew P.; Berg, Erez; Chowdhury, Debanjan (September 2023, Proceedings of the National Academy of Sciences)

   An electronic solid with itinerant carriers and localized magnetic moments represents a paradigmatic strongly correlated system. The electrical transport properties associated with the itinerant carriers, as they scatter off these local moments, have been scrutinized across a number of materials. Here, we analyze the transport characteristics associated with ultraclean PdCrO ${}_2$—a quasi-two-dimensional material consisting of alternating layers of itinerant Pd-electrons and Mott-insulating CrO ${}_2$layers—which shows a pronounced regime ofT-linear resistivity over a wide range of intermediate temperatures. By contrasting these observations to the transport properties in a closely related material PdCoO ${}_2$, where the CoO ${}_2$layers are band-insulators, we can rule out the traditional electron–phonon interactions as being responsible for this interesting regime. We propose a previously ignored electron-magneto-elastic interaction between the Pd-electrons, the Cr local moments and an out-of-plane phonon as the main scattering mechanism that leads to the significant enhancement of resistivity and aT-linear regime in PdCrO ${}_2$at temperatures far in excess of the magnetic ordering temperature. We suggest a number of future experiments to confirm this picture in PdCrO ${}_2$as well as other layered metallic/Mott-insulating materials. 

   more » « less