Studying the physical and chemical conditions of young embedded disks is crucial to constrain the initial conditions for planet formation. Here we present Atacama Large Millimeter/submillimeter Array observations of dust continuum at ∼0.″06 (8 au) resolution and molecular line emission at ∼0.″17 (24 au) resolution toward the Class 0 protostar L1527 IRS from the Large Program eDisk (Early Planet Formation in Embedded Disks). The continuum emission is smooth without substructures but asymmetric along both the major and minor axes of the disk as previously observed. The detected lines of12CO,13CO, C18O, H2CO, c-C3H2, SO, SiO, and DCN trace different components of the protostellar system, with a disk wind potentially visible in12CO. The13CO brightness temperature and the H2CO line ratio confirm that the disk is too warm for CO freezeout, with the snowline located at ∼350 au in the envelope. Both molecules show potential evidence of a temperature increase around the disk–envelope interface. SO seems to originate predominantly in UV-irradiated regions such as the disk surface and the outflow cavity walls rather than at the disk–envelope interface as previously suggested. Finally, the continuum asymmetry along the minor axis is consistent with the inclination derived from the large-scale (100″ or 14,000 au) outflow, but opposite to that based on the molecular jet and envelope emission, suggesting a misalignment in the system. Overall, these results highlight the importance of observing multiple molecular species in multiple transitions to characterize the physical and chemical environment of young disks.
We present a semi-analytic model for the growth, drift, desorption, and fragmentation of millimeter- to meter-sized particles in protoplanetary disks. Fragmentation occurs where particle collision velocities exceed critical fragmentation velocities. Using this criterion, we produce fragmentation regions in disk orbital radius–particle size phase space for particles with a range of material properties, structures, and compositions (including SiO2, Mg2SiO4, H2O, CO2, and CO). For reasonable disk conditions, compact aggregate H2O, CO2, and CO ice particles do not reach destructive relative velocities and are thus not likely to undergo collisional fragmentation. Uncoated silicate particles are more susceptible to collisional destruction and are expected to fragment in the inner disk, consistent with previous work. We then calculate the growth, drift, and sublimation of small particles, initially located in the outer disk. We find that ice-coated particles can avoid fragmentation as they grow and drift inward under a substantial range of disk conditions, as long as the particles are aggregates composed of 0.1
- NSF-PAR ID:
- 10485427
- Publisher / Repository:
- DOI PREFIX: 10.3847
- Date Published:
- Journal Name:
- The Astrophysical Journal
- Volume:
- 961
- Issue:
- 1
- ISSN:
- 0004-637X
- Format(s):
- Medium: X Size: Article No. 33
- Size(s):
- Article No. 33
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Ice chemistry in the dense, cold interstellar medium (ISM) is probably responsible for the formation of interstellar complex organic molecules (COMs). Recent laboratory experiments performed at
T ∼ 4 K have shown that irradiation of CO:N2ice samples analog to the CO-rich interstellar ice layer can contribute to the formation of COMs when H2molecules are present. We have tested this organic chemistry under a broader range of conditions relevant to the interior of dense clouds by irradiating CO:15N2:H2ice samples with 2 keV electrons in the 4–15 K temperature range. The H2ice abundance depended on both, the ice formation temperature and the thermal evolution of the samples. Formation of H-bearing organics such as formaldehyde (H2CO), ketene (C2H2O), and isocyanic acid (H15NCO) was observed upon irradiation of ice samples formed at temperatures up to 10 K, and also in ices formed at 6 K and subsequently warmed up and irradiated at temperatures up to 15 K. These results suggest that a fraction of the H2molecules in dense cloud interiors might be entrapped in the CO-rich layer of interstellar ice mantles, and that energetic processing of this layer could entail an additional contribution to the formation of COMs in the coldest regions of the ISM. -
null (Ed.)Context. The degree of coupling between the gas and the magnetic field during the collapse of a core and the subsequent formation of a disk depends on the assumed dust size distribution. Aims. We study the impact of grain–grain coagulation on the evolution of magnetohydrodynamic (MHD) resistivities during the collapse of a prestellar core. Methods. We use a 1D model to follow the evolution of the dust size distribution, out-of-equilibrium ionisation state, and gas chemistry during the collapse of a prestellar core. To compute the grain–grain collisional rate, we consider models for both random and systematic, size-dependent, velocities. We include grain growth through grain–grain coagulation and ice accretion, but ignore grain fragmentation. Results. Starting with a Mathis-Rumpl-Nordsieck (MRN) size distribution (Mathis et al. 1977, ApJ, 217, 425), we find that coagulation in grain–grain collisions generated by hydrodynamical turbulence is not efficient at removing the smallest grains and, as a consequence, does not have a large effect on the evolution of the Hall and ambipolar diffusion MHD resistivities, which still drop significantly during the collapse like in models without coagulation. The inclusion of systematic velocities, possibly induced by the presence of ambipolar diffusion, increases the coagulation rate between small and large grains, removing small grains earlier in the collapse and therefore limiting the drop in the Hall and ambipolar diffusion resistivities. At intermediate densities ( n H ~ 10 8 cm −3 ), the Hall and ambipolar diffusion resistivities are found to be higher by 1 to 2 orders of magnitude in models with coagulation than in models where coagulation is ignored, and also higher than in a toy model without coagulation where all grains smaller than 0.1 μ m would have been removed in the parent cloud before the collapse. Conclusions. When grain drift velocities induced by ambipolar diffusion are included, dust coagulation happening during the collapse of a prestellar core starting from an initial MRN dust size distribution appears to be efficient enough to increase the MHD resistivities to the values necessary to strongly modify the magnetically regulated formation of a planet-forming disk. A consistent treatment of the competition between fragmentation and coagulation is, however, necessary before reaching firm conclusions.more » « less
-
more » « less
Abstract Co2C, an emerging catalyst for the conversion of syngas to oxygenates, shows support‐sensitive behavior that has not yet been fully explained. Here, we characterize Co catalysts modified with ZnO atomic layer deposition on SiO2, carbon, CeO2, and Al2O3supports. We find that under syngas conditions, ZnO‐promoted Co transforms into Co2C on SiO2, carbon, and CeO2, but not on Al2O3. Moreover, the support affects the extent of carburization: while the SiO2‐supported catalyst carburizes completely, carbon‐ and CeO2‐supported catalysts show incomplete conversion of Co to Co2C. These three catalysts also exhibit different oxygenate selectivities. In contrast, the modified Al2O3‐supported catalyst retains the Fischer‐Tropsch catalytic properties of metallic Co. By depositing increasing amounts of Al2O3by ALD on the SiO2support, decreasing Co2C formation and oxygenate selectivity occurs.
In‐situ XANES reveals that Al2O3prevents Co2C formation by enabling the ZnO to restructure into ZnAl2O4during reduction. Thus, in addition to modifying the active catalyst phase, the promoter can also strongly interact with the support, significantly impacting catalyst performance. -
more » « less
Abstract Ni‐rich LiNi0.8Co0.1Mn0.1O2(NCM811) has been considered as a promising cathode material for high energy density lithium‐ion batteries. However, it experiences undesirable interfacial side‐reactions with the electrolyte, which lead to a rapid capacity decay. In this work, a homogeneous precipitation method is proposed for forming a uniform silicon dioxide (SiO2) coating on the NCM811 surface. The strong Si−O network provided a stable protective layer between the NCM811 active material and electrolyte to improve the electrochemical stability. As a result, the NCM811@SiO2cathode showed superior cycling stability (84.9 % after 100 cycles at 0.2 C) and rate capability (142.7 mA h g−1at 5 C) compared to the pristine NCM811 cathode (56.6 % after 100 cycles, 127.9 mA h g−1at 5 C). Moreover, the SiO2coating effectively suppressed voltage decay and pulverization of the NCM811 particles during long term cycling. This uniform coating technique offers a viable approach for stabilizing Ni‐rich cathode materials for high‐energy density lithium‐ion batteries.
