skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Site M0091 (Basin S3)
During Expedition 386, two Giant Piston Corer (GPC) system deployments in the northern study area (Basin S3) of the southern Japan Trench (Figure F1) resulted in the recovery of cores from four holes at Site M0091 (Figure F2). The water depth was between 7802 and 7812 meters below sea level (mbsl). A breakdown of operational time is reported weekly instead of daily (see OPS in Supplementary material) due to decisions to move between sites based on weather and current conditions. Holes at Site M0091 were cored during Week 6 of the offshore phase. In total, 51.94 m of cores (Table T1) and 53.5 km of hydroacoustic profiles (see Hydroacoustics) were recovered and acquired, respectively, in the focus area. Further operations details, including winch log and inclinometer information, are found for all sites in Coring methodology in the Expedition 386 methods chapter (Strasser et al., 2023a) and associated files (see PALEOMAG and WINCHLOGS in Supplementary material).  more » « less
Award ID(s):
1326927
PAR ID:
10486362
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; more » ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; « less
Publisher / Repository:
International Ocean Discovery Program
Date Published:
Journal Name:
Proceedings of the International Ocean Discovery Program Expedition reports
Volume:
386
Issue:
105
ISSN:
2377-3189
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the International Ocean Discovery Program Expedition reports)
    During Expedition 386, a total of three Giant Piston Corer (GPC) system deployments in Basin S2 in the central area of the southern Japan Trench (Figure F1) resulted in the recovery of cores from four holes at Site M0092 and two at Site M0095 (Figure F2). The water depth was between 7697 and 7702 meters below sea level (mbsl). A breakdown of operational time is reported weekly instead of daily (see OPS in Supplementary material) due to decisions to move between sites based on weather and current conditions. Holes at Sites M0092 and M0095 were acquired during Weeks 6 and 7 of the offshore phase. In total, 98 m of cores (Table T1) and 34 km of hydroacoustic profiles (see Hydroacoustics) were recovered and acquired, respectively, in this focus area. Further operations details, including winch log and inclinometer information, are found for all sites in Coring methodology in the Expedition 386 methods chapter (Strasser et al., 2023a) and associated files (see PALEOMAG and WINCHLOGS in Supplementary material). 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the International Ocean Discovery Program Expedition reports)
    During Expedition 386, one Giant Piston Corer (GPC) system deployment at Basin C/N1 in the boundary area between the central and northern Japan Trench (Figure F1) resulted in the recovery of cores from two holes at Site M0093 (Figure F2). The water depth was 7454 m below sea level (mbsl). A breakdown of operational time is reported weekly instead of daily (see OPS in Supplementary material) due to decisions to move between sites based on weather and current conditions. Holes at Site M0093 were cored during Week 7 of the offshore phase. In total, 26.91 m of cores (Table T1) and 3.89 km of hydroacoustic profiles (see Hydroacoustics) were recovered and acquired, respectively, in this focus area. Further operations details, including winch log and inclinometer information, are found for all sites in Coring methodology in the Expedition 386 methods chapter (Strasser et al., 2023a) and associated files (see PALEOMAG and WINCHLOGS in Supplementary material). 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the International Ocean Discovery Program Expedition reports)
    During Expedition 386, two Giant Piston Corer (GPC) system deployments in central Japan Trench Basin C1 (Figure F1) resulted in the recovery of cores from four holes at Site M0090 (Figure F2). The water depth was between 7445 and 7450 meters below sea level (mbsl). A breakdown of operational time is reported weekly instead of daily (see OPS in Supplementary material) due to decisions to move between sites based on weather and current conditions. Holes at Site M0090 were cored during Weeks 6 and 7 of the offshore phase. In total, 55.764 m of cores (Table T1) and 6.8 km of hydroacoustic profiles (see Hydroacoustics) were recovered and acquired, respectively, in this focus area. Further operations details, including winch log and inclinometer information, are found for all sites in Coring methodology in the Expedition 386 methods chapter (Strasser et al., 2023a) and associated files (see PALEOMAG and WINCHLOGS in Supplementary material). 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the International Ocean Discovery Program Expedition reports)
    During Expedition 386, two Giant Piston Corer (GPC) system deployments at this study area in the northern Japan Trench (Basin N2; Figure F1) resulted in the recovery of cores from four holes at Site M0088 (Figure F2). The water depth was between 7525 and 7550 meters below sea level (mbsl). A breakdown of operational time is reported weekly instead of daily (see OPS in Supplementary material) due to decisions to move between sites based on weather and current conditions. Holes at Site M0088 were cored during Week 4 of the offshore phase. In total, 56.205 m of cores (Table T1) and 49.7 km of hydroacoustic profiles (see Hydroacoustics) were recovered and acquired in this focus area. Further operations details, including winch log and inclinometer information, are found for all sites in Coring methodology in the Expedition 386 methods chapter (Strasser et al., 2023a) and associated files (see PALEOMAG and WINCHLOGS in Supplementary material). Note that inclinometer data were not properly recorded and are therefore not reported for Site M0088. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Proceedings of the International Ocean Discovery Program Expedition reports)
    During Expedition 386, a total of five Giant Piston Corer (GPC) system deployments in the northern Japan Trench (Basin N3; Figure F1) resulted in the recovery of cores from six holes at Site M0084 and four at Site M0085 (Figure F2). The water depth was between 7590 and 7603 meters below sea level (mbsl). A breakdown of operational time is reported weekly instead of daily (see OPS in Supplementary material) due to decisions to move between sites based on weather and current conditions. Cores from Sites M0084 and M0085 were acquired during Weeks 2, 3, and 5 of the offshore phase. In total, 149.2 m of cores (Table T1) and 133 km of hydroacoustic profiles (see Hydroacoustics) were recovered and acquired, respectively, in this focus area. Further operations details, including winch log and inclinometer information, are found for all sites in Coring methodology in the Expedition 386 methods chapter (Strasser et al., 2023a) and in the associated files (see PALEOMAG and WINCHLOGS in Supplementary material). 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email