An official website of the United States government
Cellular solids composed of a network of interconnected pores offer low‐density and high strength‐to‐weight ratio as exemplified by wood, bones, corks, and shells. However, the slender edges and low connectivity of the structs in cellular lattices make them vulnerable to buckle, fracture, or collapse. Here, by taking advantage of the continuity of a thin film that can follow curvatures and dissipate energy, shellular materials are created by dip coating a wireframe of the primitive triply periodic minimal surface (TPMS) with an aqueous solution of lyotropic liquid crystalline graphene oxide (GO)/polymer composites. Regulated by surface tension, GO nanosheets align on the polymer soap film as the stress builds up during drying. When the wireframe mesh density is low, the shellular material is film‐dominated, demonstrating superior mechanical strength (384.30 Nm kg−1) and high specific energy absorption (1.59 kJ kg−1) yet lightweight (equivalent density, 0.063 g cm−3), with an energy absorption rate comparable to that of carbon nanotube‐based lattices but a lower equivalent density. The study offers insights into designing lightweight yet high‐strength structural materials that also function as impact energy absorbers.
more »
« less
High strength and damage-tolerance in echinoderm stereom as a natural bicontinuous ceramic cellular solid
Abstract Due to their low damage tolerance, engineering ceramic foams are often limited to non-structural usages. In this work, we report that stereom, a bioceramic cellular solid (relative density, 0.2–0.4) commonly found in the mineralized skeletal elements of echinoderms (e.g., sea urchin spines), achieves simultaneous high relative strength which approaches the Suquet bound and remarkable energy absorption capability (ca. 17.7 kJ kg−1) through its unique bicontinuous open-cell foam-like microstructure. The high strength is due to the ultra-low stress concentrations within the stereom during loading, resulted from their defect-free cellular morphologies with near-constant surface mean curvatures and negative Gaussian curvatures. Furthermore, the combination of bending-induced microfracture of branches and subsequent local jamming of fractured fragments facilitated by small throat openings in stereom leads to the progressive formation and growth of damage bands with significant microscopic densification of fragments, and consequently, contributes to stereom’s exceptionally high damage tolerance.
more »
« less
- Award ID(s):
- 1942865
- PAR ID:
- 10487529
- Publisher / Repository:
- Springer
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 13
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Polymer matrix composites are popular in the aerospace industry due to their high strength to weight ratio. While they have become popular, understanding and predicting their specific damage evolution mechanisms remains a challenge especially in designing with damage tolerance criteria. One challenge often faced is the presence of surface damage either induced during manufacturing, machining, or service of a composite part. While many studies have investigated how quasi-static, low-velocity, and ballistic impact results in damage in the material, there remains a need to further understand the reduction in performance that results from such surface damage. In this work, micro-indentation was conducted on a unidirectional IM7/8552 laminate composite specimen to induce quasi-static impact damage that results in surface damage. The specimen was then loaded in tension to 33% of its expected failure load and imaged using synchrotron X-ray micro-computed tomography to qualitatively investigate the progression of surface damage into sub-surface damage. This work shows that at 33% of tensile failure load, surface damage propagates into delamination and fiber breakage of plies directly sub-surface. This work sheds light on the progression of surface damage at loads less than 50% of the ultimate strength of a unidirectional laminate composite.more » « less
-
Abstract Oncogene-induced replication stress generates endogenous DNA damage that activates cGAS–STING-mediated signalling and tumour suppression1–3. However, the precise mechanism of cGAS activation by endogenous DNA damage remains enigmatic, particularly given that high-affinity histone acidic patch (AP) binding constitutively inhibits cGAS by sterically hindering its activation by double-stranded DNA (dsDNA)4–10. Here we report that the DNA double-strand break sensor MRE11 suppresses mammary tumorigenesis through a pivotal role in regulating cGAS activation. We demonstrate that binding of the MRE11–RAD50–NBN complex to nucleosome fragments is necessary to displace cGAS from acidic-patch-mediated sequestration, which enables its mobilization and activation by dsDNA. MRE11 is therefore essential for cGAS activation in response to oncogenic stress, cytosolic dsDNA and ionizing radiation. Furthermore, MRE11-dependent cGAS activation promotes ZBP1–RIPK3–MLKL-mediated necroptosis, which is essential to suppress oncogenic proliferation and breast tumorigenesis. Notably, downregulation ofZBP1in human triple-negative breast cancer is associated with increased genome instability, immune suppression and poor patient prognosis. These findings establish MRE11 as a crucial mediator that links DNA damage and cGAS activation, resulting in tumour suppression through ZBP1-dependent necroptosis.more » « less
-
Abstract Flexible thermoelectric devices (TEDs) exhibit adaptability to curved surfaces, holding significant potential for small‐scale power generation and thermal management. However, they often compromise stretchability, energy conversion, or robustness, thus limiting their applications. Here, the implementation of 3D soft architectures, multifunctional composites, self‐healing liquid metal conductors, and rigid semiconductors is introduced to overcome these challenges. These TEDs are extremely stretchable, functioning at strain levels as high as 230%. Their unique design, verified through multiphysics simulations, results in a considerably high power density of 115.4 µW cm⁻2at a low‐temperature gradient of 10 °C. This is achieved through 3D printing multifunctional elastomers and examining the effects of three distinct thermal insulation infill ratios (0%, 12%, and 100%) on thermoelectric energy conversion and structural integrity. The engineered structure is lighter and effectively maintains the temperature gradient across the thermoelectric semiconductors, thereby resulting in higher output voltage and improved heating and cooling performance. Furthermore, these thermoelectric generators show remarkable damage tolerance, remaining fully functional even after multiple punctures and 2000 stretching cycles at 50% strain. When integrated with a 3D‐printed heatsink, they can power wearable sensors, charge batteries, and illuminate LEDs by scavenging body heat at room temperature, demonstrating their application as self‐sustainable electronics.more » « less
-
Abstract Force‐responsive molecules that produce fluorescent moieties under stress provide a means for stress‐sensing and material damage assessment. In this work, we report a mechanophore based on Diels‐Alder adductTAD‐Anof 4,4′‐(4,4′‐diphenylmethylene)‐bis‐(1,2,4‐triazoline‐3,5‐dione) and initiator‐substituted anthracene that can undergo retro‐Diels‐Alder (rDA) reaction by pulsed ultrasonication and compressive activation in bulk materials. The influence of having C−N versus C−C bonds at the sites of bond scission is elucidated by comparing the relative mechanical strength ofTAD‐Anto another Diels‐Alder adductMAL‐Anobtained from maleimide and anthracene. The susceptibility to undergo rDa reaction correlates well with bond energy, such that C−N bond containingTAD‐Andegrades faster C−C bond containingMAL‐Anbecause C−N bond is weaker than C−C bond. Specifically, the results from polymer degradation kinetics under pulsed ultrasonication shows that polymer containingTAD‐Anhas a rate constant of 1.59×10−5 min−1, whileMAL‐An(C−C bond) has a rate constant of 1.40×10−5 min−1. Incorporation ofTAD‐Anin a crosslinked polymer network demonstrates the feasibility to utilizeTAD‐Anas an alternative force‐responsive probe to visualize mechanical damage where fluorescence can be “turned‐on” due to force‐accelerated retro‐Diels‐Alder reaction.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1038/s41467-022-33712-z
