skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: In-process thermal imaging to detect internal features and defects in fused filament fabrication
The objective of this work is to identify and measure in situ the embedded features in parts manufactured with a fused filament fabrication (FFF) 3D printer. After implementing the monitoring system consisting of optical and thermal cameras, the efficiency of the system is determined in terms of efficacy for automated defect detection through data analysis. In contrast to our previous work, which involved the detection of a large number of randomly embedded sub-surface defects, this study identifies defects of various sizes, geometries, and depths printed in a rectangular strip. Temperature differences, or ΔT, between certain layers are evaluated to determine their significance to the detection of embedded features and internal voids. ΔT between the final layer of a void within the embedded feature and the subsequent layer was found to increase as void size decreased. ΔT between the formation layer and the subsequent layer decreased as void size decreased. Additionally, embedded feature geometries registered higher ΔT between formation layer and the subsequent layer when they consisted of 3-layer voids, which indicates that larger voids, or multilayer defects, within embedded features led to higher formation layer temperatures. Overall, real-time image acquisition, image processing, and data correlation was demonstrated to effectively detect abnormalities in large datasets.  more » « less
Award ID(s):
1931724
PAR ID:
10488409
Author(s) / Creator(s):
;
Publisher / Repository:
Springer Nature
Date Published:
Journal Name:
The International Journal of Advanced Manufacturing Technology
Volume:
129
Issue:
7-8
ISSN:
0268-3768
Page Range / eLocation ID:
3475 to 3483
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, American Composites Society)
    Micro-voids within the bead microstructure of additively manufactured short carbon fiber- reinforced polymer composites are known to compromise the material performance. Unfortunately, a comprehensive understanding of the formation mechanisms of micro-voids during polymer processing is currently lacking. The present study considers micro-void nucleation at fiber inter-faces, particularly those occurring at the end of suspended fibers. Micro-computed tomography (μCT) image acquisition techniques are used to characterize microstructural features of a 13wt% carbon fiber reinforced ABS compo-site bead manufactured via Large Area Additive Manufacturing (LAAM). The results reveal a significant collection of micro-voids at the tips of fibers approaching 80% of the total micro-void volume fraction. In addition, fiber tip micro-voids are relatively larger and less spherical than micro-voids isolated within the ABS matrix. Theoretical formulations of several known mechanisms for micro-void nucleation during LAAM material processing indicate that local-ized fluid pressure likely plays a pivotal role in micro-void formation. To better expose this mechanism, we simulate the hydrostatic flow-field pressure distri-bution surrounding a single rigid fiber suspended in simple shear flow using fi-nite element analysis (FEA). Computed results demonstrate that the polymer matrix pressure decreases significantly at the fiber ends where micro-void nucleation is experimentally observed to occur. Our approach provides the fiber surface pressure distribution in simple shear flow that typifies nozzle regions with extreme flow conditions, enhancing our understanding of micro-void development mechanisms as the polymer melt flows through the nozzle. 
    more » « less
  2. (, Proceedings 2023 International Solid Freeform Fabrication Symposium)
    Short carbon fiber-reinforced polymer composite structures produced using Large Area Additive Manufacturing (LAAM) have garnered significant attention due to the design flexibility, energy savings, and materials selection associated with this process. However, the physical and mechanical properties of the additively manufactured composite parts often fall below expectations due to void formation between printed beads and within the microstructure of individual beads. This study aims to investigate the effect of bed temperature on the microstructure within the beads of two-layer Short Carbon Fiber reinforced Acrylonitrile Butadiene Styrene (SCF/ABS) beads manufactured via the LAAM system. This study employs high-resolution 3D micro-computed tomography (μCT) to evaluate the void shape and distribution within the microstructure of composite parts printed at various bed temperatures. The results of this study demonstrate substantial variation in the void volume fraction among four bead sets deposited at different print bed temperatures. Moreover, within each part, a noticeable discrepancy in void volume fraction is observed between the top and bottom bead of the two-bead test samples. Preliminary results indicate that increasing the bed temperature from 25°C to 75°C reduces void volume fraction within the microstructure of the composite parts. However, an opposite trend emerges when the bed temperature is further increased to 100°C, increasing void volume fraction, which needs further investigation to understand. This study also evaluated the void shapes through the calculation of their sphericity. The preliminary results reveal that as the bed temperature increases from 25°C to 75°C, the voids exhibit higher sphericity within the printed parts as the interconnected voids decrease. 
    more » « less
  3. ; ; (, The Astrophysical Journal)
    Abstract We investigate the properties of voids and void galaxies in theTNG300simulation. Using a luminous galaxy catalog and a spherical void-finding algorithm, we identify 5078 voids at redshiftz= 0. The voids cover 83% of the simulation volume and have a median radius of 4.4h−1Mpc. We identify two populations of field galaxies based on whether the galaxies reside within a void (“void galaxies”; 75,220 objects) or outside a void (“nonvoid galaxies”; 527,454 objects). Within the voids, mass does not directly trace light. Instead, the mean radial underdensity profile as defined by the locations of void galaxies is systematically lower than the mean radial underdensity profile as defined by the dark matter (i.e., the voids are more “devoid” of galaxies than they are of mass). Within the voids, the integrated underdensity profiles of the dark matter and the galaxies are independent of the local background density (i.e., voids-in-voids versus voids-in-clouds). Beyond the void radii, however, the integrated underdensity profiles of both the dark matter and the galaxies exhibit strong dependencies on the local background density. Compared to nonvoid galaxies, void galaxies are on average younger, less massive, bluer in color, less metal enriched, and have smaller radii. In addition, the specific star formation rates of void galaxies are ∼20% higher than nonvoid galaxies and, in the case of galaxies with central supermassive black holes withMBH≳ 3 × 106h−1M⊙, the fraction of active void galaxies is ∼25% higher than active nonvoid galaxies. 
    more » « less
  4. ; ; (, Composites Part A: Applied Science and Manufacturing)
    The presence of voids within the microstructure of short carbon fiber polymer composites produced by additive manufacturing (AM) technology are known to alter the expected material behavior that impair part performance. Previous research efforts aimed at understanding the formation mechanisms of these micro-voids during the polymer extrusion/deposition process have not kept up with the advancement of this AM technology. The present study investigates the phenomenon of micro-void nucleation at the fiber/matrix interface, especially those that form at fiber tips, by characterizing the microstructural configuration of a 13 % carbon fiber filled ABS polymer composite print bead specimen using 3D X-ray micro computed tomography image acquisition and analysis. The results reveal a high level of micro-voids segregation at the ends of fibers that are relatively larger in size and less spherical as compared to micro-voids isolated within the ABS matrix. Additionally, by simulating the hydrostatic flow-field pressure distribution surrounding a single rigid ellipsoidal fibre in colloidal suspension using Jeffery’s model equations, we show that the pressure drops to a critical value at the fibre tips where the micro-voids nucleation is experimentally observed to occur. The study helps to improve our understanding of the potential mechanisms that may be responsible for micro-void development within beads printed with extrusion/ deposition AM. 
    more » « less
  5. ; (, Journal of Composites Science)
    Short carbon fiber-reinforced polymer composites are widely used in polymer extrusion additive manufacturing (AM), including large-area additive manufacturing (LAAM), due to their enhanced mechanical properties as compared to neat polymers. However, the mechanical properties of these composites depend on microstructural characteristics, including fibers and micro-voids, which are determined during processing. In this work, the correlation between fibers and micro-voids within the microstructure of LAAM polymer composites throughout various processing stages of short carbon fiber-reinforced acrylonitrile butadiene styrene (SCF/ABS) is investigated. The processing stages considered here include the incoming pellets, a single freely extruded strand, a single regularly deposited bead, and a single regularly deposited bead pressed by a mechanical roller. A high-resolution X-ray micro-computed tomography (µCT) system is employed to characterize the microstructural features in terms of the fibers (volume fraction, fiber orientation tensor) and micro-voids (volume fraction, sphericity) in the SCF/ABS samples. The results indicate that micro-voids exist within the microstructure of the SCF/ABS composite in all four stages considered here and that the micro-void volume fraction and micro-void sphericity vary among the test samples. Moreover, the results show a considerable variation in fiber orientation and fiber volume fraction within the microstructure throughout all the stages considered; however, all the samples show the highest alignment in the extrusion/print direction. Furthermore, a correlation is identified between the fiber orientation and the micro-void volume fraction within samples from all four stages considered here. This finding suggests that fibers tend to align more in the extrusion/print direction in regions with less micro-void content. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email