skip to main content


Title: Kinetic coupling in distal foot joints during walking
Abstract Background

Kinematic coupling between the first metatarsophalangeal (MTP) and midtarsal joints is evident during gait and other movement tasks, however kinetic foot coupling during walking has not been examined. Furthermore, contributing factors to foot coupling are still unclear. Therefore, the purpose of this study was to investigate kinematic and kinetic coupling within the foot by restricting MTP motion during overground walking. We hypothesized that when the MTP joint was prevented from fully extending, the midtarsal joint would achieve less peak motion and generate less positive work compared to walking with normal MTP motion.

Methods

Twenty‐six individuals participated in this randomized cross‐over study. Using motion capture to track motion, participants walked at 1.3 m/s while wearing a brace that restricted MTP motion in a neutral (BR_NT) or extended (BR_EX) position. Additionally, participants walked while wearing the brace in a freely moveable setting (BR_UN) and with no brace (CON). A pressure/shear sensing device was used to capture forces under each foot segment. During stance, peak joint motion and work were calculated for the MTP and midtarsal joints using inverse dynamics. A series of ANOVAs and Holm post hoc tests were performed for all metrics (alpha = 0.05).

Results

The brace successfully decreased peak MTP motion by 19% compared to BR_UN and CON. This was coupled with 9.8% less midtarsal motion. Kinetically, the work absorbed by the MTP joint (26–51%) and generated by the midtarsal joint (30–38%) were both less in BR_EX and BR_NT compared to BR_UN.

Conclusion

Implications and sources of coupling between the MTP and midtarsal joints are discussed within the context of center of pressure shifts and changes to segmental foot forces. Our results suggest that interventions aimed at modulating MTP negative work (such as footwear or assistive device design) should not ignore the midtarsal joint.

 
more » « less
Award ID(s):
2032155 2032190
PAR ID:
10489143
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Journal of Foot and Ankle Research
Volume:
16
Issue:
1
ISSN:
1757-1146
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Background

    Previous research shows kinematic and kinetic coupling between the metatarsophalangeal (MTP) and midtarsal joints during gait. Studying the effects of MTP position as well as foot structure on this coupling may help determine to what extent foot coupling during dynamic and active movement is due to the windlass mechanism. This study's purpose was to investigate the kinematic and kinetic foot coupling during controlled passive, active, and dynamic movements.

    Methods

    After arch height and flexibility were measured, participants performed four conditions: Seated Passive MTP Extension, Seated Active MTP Extension, Standing Passive MTP Extension, and Standing Active MTP Extension. Next, participants performed three heel raise conditions that manipulated the starting position of the MTP joint: Neutral, Toe Extension, and Toe Flexion. A multisegment foot model was created in Visual 3D and used to calculate ankle, midtarsal, and MTP joint kinematics and kinetics.

    Results

    Kinematic coupling (ratio of midtarsal to MTP angular displacement) was approximately six times greater in Neutral heel raises compared to Seated Passive MTP Extension, suggesting that the windlass only plays a small kinematic role in dynamic tasks. As the starting position of the MTP joint became increasingly extended during heel raises, the amount of negative work at the MTP joint and positive work at the midtarsal joint increased proportionally, while distal‐to‐hindfoot work remained unchanged. Correlations suggest that there is not a strong relationship between static arch height/flexibility and kinematic foot coupling.

    Conclusions

    Our results show that there is kinematic and kinetic coupling within the distal foot, but this coupling is attributed only in small measure to the windlass mechanism. Additional sources of coupling include foot muscles and elastic energy storage and return within ligaments and tendons. Furthermore, our results suggest that the plantar aponeurosis does not function as a rigid cable but likely has extensibility that affects the effectiveness of the windlass mechanism. Arch structure did not affect foot coupling, suggesting that static arch height or arch flexibility alone may not be adequate predictors of dynamic foot function.

     
    more » « less
  2. Abstract

    Toe joints play an important functional role in able-bodied walking; however, for prosthesis users, the effect of adding a toe joint to a passive prosthetic foot remains largely unknown. The current study explores the kinematics, kinetics, rate of oxygen consumption and user preference of nine individuals with below-knee limb loss. Participants walked on a passive prosthetic foot in two configurations: with a Flexible, articulating toe joint and with a Locked-out toe joint. During level treadmill gait, participants exhibited a decrease in Push-Off work when using the Flexible toe joint prosthesis versus the Locked toe joint prosthesis: 16% less from the prosthesis (p = 0.004) and 10% less at the center of mass level (p = 0.039). However, between configurations, participants exhibited little change in other gait kinematics or kinetics, and no apparent or consistent difference in the rate of oxygen consumption (p = 0.097). None of the traditional biomechanical or metabolic outcomes seemed to explain user preference. However, an unexpected and intriguing observation was that all participants who wore the prosthesis on their dominant limb preferred the Flexible toe joint, and every other participant preferred the Locked configuration. Although perhaps coincidental, such findings may suggest a potential link between user preference and limb dominance, offering an interesting avenue for future research.

     
    more » « less
  3. Background: This study, the first of its kind, originated with the need for a brace (an ankle foot orthosis), to constrain ankle plantarflexion and dorsiflexion within a motion threshold of <5deg. A conventional thermoplastic, solid brace failed during a quasi-static loading study, informing the investigation and development of an experimental carbon composite brace, maximizing stiffness and proximity of shank and foot cylindrical shells to provide the required degree of control. Methods: Two experiments were conducted: a quasi-static loading study, using cadaveric limbs (n =2), and a gait study with healthy subjects (n =14). Conditions tested were STOP, FREE, and CONTROL. Data for all studies were collected using six motion-capture cameras (Vicon, Oxford, UK; 120 Hz) tracking bone-anchored markers (cadaveric limbs) and skin-anchored markers (subjects). In the quasi-static loading study, loading conditions were congruent with the gait study. Study 1 involved a quasi-static loading analysis using cadaveric limbs, compared motion data from a conventional thermoplastic solid brace and the experimental brace. Study 2 involved quantifying ankle plantarflexion and dorsiflexion in subjects during treadmill walking, in brace STOP, FREE, and CONTROL conditions. Findings: The experimental brace in STOP condition consistently constrained ankle plantarflexion and dorsiflexion below the motion threshold of <5 deg, across all studies. Interpretation: Collectively, these findings demonstrate (1) that a conventional thermoplastic, solid brace was ineffective for clinical applications that required significant motion control, and (2) that ankle motion control is most effective when considered as a relationship between the brace, the ankle-foot complex, and the external forces that affect them both. 
    more » « less
  4. Abstract This paper presents a new two-step design procedure and preliminary kinematic evaluation of a novel, passive, six-bar knee-ankle-foot orthosis (KAFO). The kinematic design and preliminary kinematic gait analysis of the KAFO are based on motion capture data from a single healthy male subject. Preliminary kinematic evaluation shows that the designed passive KAFO is capable of supporting flexion and extension of the knee joint during stance and swing phases of walking. The two-step design procedure for the KAFO consists of (1) computational synthesis based on user's motion data and (2) performance optimization. In the computational synthesis step, first the lower leg (knee-ankle-foot) of the subject is approximated as a 2R kinematic chain and its target trajectories are specified from motion capture data. Six-bar linkages are synthesized to coordinate the angular movements of knee and ankle joints of the 2R chain at 11 accuracy points. The first step of the design procedure yields 332 six-bar KAFO design candidates. This is followed by a performance optimization step in which the KAFO design candidates are optimally modified to satisfy specified constraints on end-effector trajectory and shape. This two-step process yields an optimally designed passive six-bar KAFO that shows promising kinematic results at the knee joint of the user during walking. The preliminary prototype manufactured is cost effective, easy to operate, and suitably demonstrates the feasibility of the proposed concept. 
    more » « less
  5. Background:

    Athletes, especially female athletes, experience high rates of tibial bone stress injuries (BSIs). Knowledge of tibial loads during walking and running is needed to understand injury mechanisms and design safe running progression programs.

    Purpose:

    To examine tibial loads as a function of gait speed in male and female runners.

    Study Design:

    Controlled laboratory study.

    Methods:

    Kinematic and kinetic data were collected on 40 recreational runners (20 female, 20 male) during 4 instrumented gait speed conditions on a treadmill (walk, preferred run, slow run, fast run). Musculoskeletal modeling, using participant-specific magnetic resonance imaging and motion data, was used to estimate tibial stress. Peak tibial stress and stress-time impulse were analyzed using 2-factor multivariate analyses of variance (speed*sex) and post hoc comparisons (α = .05). Bone geometry and tibial forces and moments were examined.

    Results:

    Peak compression was influenced by speed ( P < .001); increasing speed generally increased tibial compression in both sexes. Women displayed greater increases in peak tension ( P = .001) and shear ( P < .001) than men when transitioning from walking to running. Further, women displayed greater peak tibial stress overall ( P < .001). Compressive and tensile stress-time impulse varied by speed ( P < .001) and sex ( P = .006); impulse was lower during running than walking and greater in women. A shear stress-time impulse interaction ( P < .001) indicated that women displayed greater impulse relative to men when changing from a walk to a run. Compared with men, women displayed smaller tibiae ( P < .001) and disproportionately lower tibial forces ( P≤ .001-.035).

    Conclusion:

    Peak tibial stress increased with gait speed, with a 2-fold increase in running relative to walking. Women displayed greater tibial stress than men and greater increases in stress when shifting from walking to running. Sex differences appear to be the result of smaller bone geometry in women and tibial forces that were not proportionately lower, given the womens’ smaller stature and lower mass relative to men.

    Clinical Relevance:

    These results may inform interventions to regulate running-related training loads and highlight a need to increase bone strength in women. Lower relative bone strength in women may contribute to a sex bias in tibial BSIs, and female runners may benefit from a slower progression when initiating a running program.

     
    more » « less