Efficient and affordable synthesis of Li+functional ceramics is crucial for the scalable production of solid electrolytes for batteries. Li‐garnet Li7La3Zr2O12−d(LLZO), especially its cubic phase (cLLZO), attracts attention due to its high Li+conductivity and wide electrochemical stability window. However, high sintering temperatures raise concerns about the cathode interface stability, production costs, and energy consumption for scalable manufacture. We show an alternative “sinter‐free” route to stabilize cLLZO as films at half of its sinter temperature. Specifically, we establish a time‐temperature‐transformation (TTT) diagram which captures the amorphous‐to‐crystalline LLZO transformation based on crystallization enthalpy analysis and confirm stabilization of thin‐film cLLZO at record low temperatures of 500 °C. Our findings pave the way for low‐temperature processing via TTT diagrams, which can be used for battery cell design targeting reduced carbon footprints in manufacturing.
Highly disordered amorphous Li7La3Zr2O12(aLLZO) is a promising class of electrolyte separators and protective layers for hybrid or all‐solid‐state batteries due to its grain‐boundary‐free nature and wide electrochemical stability window. Unlike low‐entropy ionic glasses such as LixPOyNz(LiPON), these medium‐entropy non‐Zachariasen aLLZO phases offer a higher number of stable structure arrangements over a wide range of tunable synthesis temperatures, providing the potential to tune the LBU‐Li+transport relation. It is revealed that lanthanum is the active “network modifier” for this new class of highly disordered Li+conductors, whereas zirconium and lithium serve as “network formers”. Specifically, within the solubility limit of La in aLLZO, increasing the La concentration can result in longer bond distances between the first nearest neighbors of Zr─O and La─O within the same local building unit (LBU) and the second nearest neighbors of Zr─La across two adjacent network‐former and network‐modifier LBUs, suggesting a more disordered medium‐ and long‐range order structure in LLZO. These findings open new avenues for future designs of amorphous Li+electrolytes and the selection of network‐modifier dopants. Moreover, the wide yet relatively low synthesis temperatures of these glass‐ceramics make them attractive candidates for low‐cost and more sustainable hybrid‐ or all‐solid‐state batteries for energy storage.
more » « less- NSF-PAR ID:
- 10489957
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract Efficient and affordable synthesis of Li+functional ceramics is crucial for the scalable production of solid electrolytes for batteries. Li‐garnet Li7La3Zr2O12−d(LLZO), especially its cubic phase (cLLZO), attracts attention due to its high Li+conductivity and wide electrochemical stability window. However, high sintering temperatures raise concerns about the cathode interface stability, production costs, and energy consumption for scalable manufacture. We show an alternative “sinter‐free” route to stabilize cLLZO as films at half of its sinter temperature. Specifically, we establish a time‐temperature‐transformation (TTT) diagram which captures the amorphous‐to‐crystalline LLZO transformation based on crystallization enthalpy analysis and confirm stabilization of thin‐film cLLZO at record low temperatures of 500 °C. Our findings pave the way for low‐temperature processing via TTT diagrams, which can be used for battery cell design targeting reduced carbon footprints in manufacturing.
-
null (Ed.)Lithium conducting garnets are attractive solid electrolytes for solid-state lithium batteries but are difficult to process, generally requiring high reaction and sintering temperatures with long durations. In this work, we demonstrate a synthetic route to obtain Ta-doped garnet (Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 ) utilizing La- and Ta-doped lanthanum zirconate (La 2.4 Zr 1.12 Ta 0.48 O 7.04 ) pyrochlore nanocrystals as quasi-single-source precursors. Via molten salt synthesis (MSS) in a highly basic flux, the pyrochlore nanocrystals transform to Li-garnet at reaction temperatures as low as 400 °C. We also show that the pyrochlore-to-garnet conversion can take place in one step using reactive sintering, resulting in densified garnet ceramics with high ionic conductivity (0.53 mS cm −1 at 21 °C) and relative density (up to 94.7%). This approach opens new avenues for lower temperature synthesis of lithium garnets using a quasi-single-source precursor and provides an alternative route to highly dense garnet solid electrolytes without requiring advanced sintering processes.more » « less
-
Cation‐disordered lithium‐excess metal oxides have recently emerged as a promising new class of high‐energy‐density cathode materials for Li‐ion batteries, but the exploration of disordered materials has been hampered by their vast and unexplored composition space. This study proposes a practical methodology for the identification of stable cation‐disordered rocksalts. Here, it is established that the efficient method, which makes use of special quasirandom structures, correctly predicts cation‐ordering strengths in agreement with accurate Monte‐Carlo simulations and experimental observations. By applying the approach to the composition space of ternary oxides with formula unit Li
A 0.5B 0.5O2(A ,B : transition metals), this study discovers a previously unknown cation‐disordered structure, LiCo0.5Zr0.5O2, that may function as the basis for a new class of cation‐disordered cathode materials. This computational prediction is confirmed experimentally by solid‐state synthesis and subsequent characterization by powder X‐ray diffraction demonstrating the potential of the computational screening of large composition spaces for accelerating materials discovery. -
Tantalum‐doped lithium lanthanum zirconate garnet (Li7−
x La3Zr2−x Tax O12[LLZTO]) has received interest as a solid electrolyte for solid‐state lithium batteries due to its good electrochemical properties and ionic conductivity. However, the source of discrepancies for reported values of ionic conductivity in nominally or nearly equivalent compositions of LLZTO is not completely clear. Herein, synthesis‐related factors that may contribute to the differences in performance of garnet electrolytes are systematically characterized. The conductivity of samples with composition Li6.4La3Zr1.4Ta0.6O12prepared by various methods including solid‐state reaction (SSR), combustion, and molten salt synthesis is compared. Varying levels of elemental inhomogeneity, comprising a variation in Ta and Zr content on the level of individual LLZTO particles, are identified. The elemental inhomogeneity is found to be largely preserved even after high‐temperature sintering and correlated with reduced ionic conductivity. It is shown that the various synthesis and processing‐related variables in each of the preparation methods play a role in these compositional variations, and that even LLZTO synthesized via conventional, high‐temperature SSR can exhibit substantial variability in local composition. However, by improving reagent mixing and using LLZTO powder with low agglomeration and small particle size distribution, the compositional uniformity, and hence, ionic conductivity, of sintered garnet electrolytes can be improved.