An official website of the United States government
Macromolecular architecture is a critical parameter when tuning polymer material properties. Although the implementation of non-linear polymers in different applications has grown over the years, polymer grafted surfaces such as nanoparticles have traditionally been composed of linear thermoplastic polymers, with a limited number of examples demonstrating a diversity in polymer architectures. In an effort to combine polymer architecturally dependent material properties with polymer grafted particles (PGPs), as opposed to conventional methods of tuning polymer grafting parameters such as the number of chains per surface area (i.e., polymer graft density), a series of bottlebrush grafted particles were synthesized using surface-initiated ring-opening metathesis polymerization (SI-ROMP). These bottlebrush PGPs are composed of glassy, semi-crystalline, and elastomeric polymer side chains with controlled backbone degrees of polymerization (Nbb) at relatively constant polymer graft density on the surface of silica particles with diameters equaling approximately 160 or 77 nm. Bottlebrush polymer chain conformations, evaluated by measuring the brush height of surface grafted polymer chains in solution and the melt, undergo drastic changes in macromolecular dimensions in different environments. In solution, brush heights increase linearly as a function of Nbb, consistent with fully stretched chains, which is confirmed using cryogenic transmission electron microscopy (Cryo-TEM). Meanwhile, brush heights are consistently at a minimum in the melt, indicative of chains collapsed on the particle surface. The conformational extremes for grafted bottlebrush polymers are unseen in any linear polymer chain systems, highlighting the effect of macromolecular architecture and surface grafting. Bottlebrush grafted particles are an exciting class of materials where diversifying polymer architectures will expand PGP material design rules that harness macromolecular architecture to dictate properties.
more »
« less
Lens epithelial cell response to polymer stiffness and polymer chemistry
Abstract Posterior capsule opacification (PCO) is the most common complication of cataract surgery, and intraocular lens (IOL) implantation is the standard of care for cataract patients. Induction of postoperative epithelial‐mesenchymal transition (EMT) in residual lens epithelial cells (LEC) is the main mechanism by which PCO forms. Previous studies have shown that IOLs made with different materials have varying incidence of PCO. The aim of this paper was to study the interactions between human (h)LEC and polymer substrates. Polymers and copolymers of 2‐hydroxyethyl methacrylate (HEMA) and 3‐methacryloxypropyl tris(trimethylsiloxy)silane (TRIS) were synthesized and evaluated due to the clinical use of these materials as ocular biomaterials and implants. The chemical properties of the polymer surfaces were evaluated by contact angle, and polymer stiffness and roughness were measured using atomic force microscopy. In vitro studies showed the effect of polymer mechanical properties on the behavior of hLECs. Stiffer polymers increased α‐smooth muscle actin expression and induced cell elongation. Hydrophobic and rough polymer surfaces increased cell attachment. These results demonstrate that attachment of hLECs on different surfaces is affected by surface properties in vitro, and evaluating these properties may be useful for investigating prevention of PCO.
more »
« less
- Award ID(s):
- 2227527
- PAR ID:
- 10490539
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- ISSN:
- 2642-4150
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We report a novel and facile organosilane plasma polymerization method designed to improve the surface characteristics of poly(tetrafluoroethylene) (PTFE). We hypothesized that the polymerized silane coating would provide an adhesive surface for endothelial cell proliferation due to a large number of surface hydroxyl groups, while the large polymer networks on the surface of PTFE would hinder platelet attachment. The plasma polymerized PTFE surfaces were then systematically characterized via different analytical techniques such as FTIR, XPS, XRD, Contact angle, and SEM. The key finding of the characterization is the time-dependent deposition of an organosilane layer on the surface of PTFE. This layer was found to provide favorable surface properties to PTFE such as a very high surface oxygen content, high hydrophilicity and improved surface mechanics. Additionally, in vitro cellular studies were conducted to determine the bio-interface properties of the plasma-treated and untreated PTFE. The important results of these experiments were rapid endothelial cell growth and decreased platelet attachment on the plasma-treated PTFE compared to untreated PTFE. Thus, this new surface modification technique could potentially address the current challenges associated with PTFE for blood contact applications, specifically poor endothelial cell growth and risk of thrombosis.more » « less
-
Abstract Current experimental vitreous substitutes only replace the physical functions of the natural vitreous humor. Removal of the native vitreous disrupts oxygen homeostasis in the eye, causing oxidative damage to the lens that likely results in cataract formation. Neither current clinical treatments nor other experimental vitreous substitutes consider the problem of oxidative stress after vitrectomy. To address this problem, biomimetic hydrogels are prepared by free radical polymerization of poly(ethylene glycol) methacrylate and poly(ethylene glycol) diacrylate. These hydrogels have similar mechanical and optical properties to the vitreous. The hydrogels are injectable through small‐gauge needles and demonstrate in vitro biocompatibility with human retinal and lens epithelial cells. The hydrogels and added vitamin C, an antioxidant, show a synergistic effect in protecting ocular cells against reactive oxygen species, which fulfills a chemical function of the natural vitreous. These hydrogels have the potential to prevent post‐vitrectomy cataract formation and reduce the cost of additional surgeries.more » « less
-
Introducing functionality onto PE surfaces is a longstanding challenge in polymer science, driven by the need for polymer materials with improved adhesion and antifouling properties. Herein, we report surface-initiated hydrogen atom transfer-reversible addition−fragmentation chain transfer(SI HAT RAFT) as a robust method to grow high-density brush polymers from PE surfaces.more » « less
-
Abstract Biofilm formation is a major cause of hospital‐acquired infections. Research into biofilm‐resistant materials is therefore critical to reduce the frequency of these events. Polymer microarrays offer a high‐throughput approach to enable the efficient discovery of novel biofilm‐resistant polymers. Herein, bacterial attachment and surface chemistry are studied for a polymer microarray to improve the understanding ofPseudomonas aeruginosabiofilm formation on a diverse set of polymeric surfaces. The relationships between time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) data and biofilm formation are analyzed using linear multivariate analysis (partial least squares [PLS] regression) and a nonlinear self‐organizing map (SOM). The SOM models revealed several combinations of fragment ions that are positively or negatively associated with bacterial biofilm formation, which are not identified by PLS. With these insights, a second PLS model is calculated, in which interactions between key fragments (identified by the SOM) are explicitly considered. Inclusion of these terms improved the PLS model performance and shows that, without such terms, certain key fragment ions correlated with bacterial attachment may not be identified. The chemical insights provided by the combination of PLS regression and SOM will be useful for the design of materials that support negligible pathogen attachment.more » « less
