An official website of the United States government
Abstract We introduce cascaded parity-time (PT)-symmetric artificial sheets (e.g. metasurfaces or frequency selective surfaces) that may exhibit multiple higher-order laser-absorber modes and bidirectional reflectionless transmission resonances within the PT-broken phase, as well as a unidirectional reflectionless transmission resonance associated with the exceptional point (EP). We derive the explicit expressions of the gain–loss parameter required for obtaining these modes and their intriguing physical properties. By exploiting the cascaded PT structures, the gain–loss threshold for the self-dual laser-absorber operation can be remarkably lowered, while the EP remains unaltered. We further study interferometric sensing based on such a multimodal laser-absorber and demonstrate that its sensitivity may be exceptionally high and proportional to the number of metasurfaces along the light propagation direction.
more »
« less
Optical limiter based on PT-symmetry breaking of reflectionless modes
The application of parity–time (PT) symmetry in optics, especially PT-symmetry breaking, has attracted considerable attention as an approach to controlling light propagation. Here, we report optical limiting by two coupled optical cavities with a PT-symmetric spectrum of reflectionless modes. The optical limiting is related to broken PT symmetry due to light-induced changes in one of the cavities. Our experimental implementation involves a three-mirror resonator of alternating layers of ZnS and cryolite with a PT-symmetric spectral degeneracy of two reflectionless modes. The passive optical limiting is demonstrated by measurements of single 532 nm 6 ns laser pulses and thermo-optical simulations. At fluences below 10mJ/cm2, the multilayer exhibits a flattop passband at 532 nm. At higher fluences, laser heating combined with the thermo-optic effect in ZnS leads to cavity detuning and PT-symmetry breaking of the reflectionless modes. As a result, the entire multilayer structure quickly becomes highly reflective, protecting itself from laser-induced damage. The cavity detuning mechanism can differ at much higher limiting thresholds and include nonlinearity.
more »
« less
- Award ID(s):
- 2148318
- PAR ID:
- 10491409
- Publisher / Repository:
- Optica
- Date Published:
- Journal Name:
- Optica
- Volume:
- 10
- Issue:
- 10
- ISSN:
- 2334-2536
- Page Range / eLocation ID:
- 1302
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Large-area lasers are practical for generating high output powers. However, this often comes at the expense of lower beam quality due to the introduction of higher-order modes. Here, we experimentally demonstrate a new type of electrically pumped, large-area edge-emitting lasers that exhibit a high power emission (∼0.4 W) and a high-quality beam (M 2 ∼1.25). These favorable operational characteristics are enabled by establishing a quasi PT-symmetry between the second-order mode of a large area two-mode laser cavity and that of a single-mode auxiliary partner cavity, i.e., by implementing a partial isospectrality between the two coupled cavities. This in turn enlarges the effective volume of the higher-order modes. As a result, a selective pump applied via current injection into the main laser cavity can provide a stronger modal gain to the fundamental mode, and thus lead to lasing in the single mode regime after filtering out higher order transverse modes. The reported experimental results confirm this intuitive picture and are in good agreement with both theoretical and numerical analysis. Above all, the employed material platform and fabrication process are compatible with the industrial standards of semiconductor lasers. This work provides the first clear demonstration, beyond previous proof-of-concept studies, of the utility of PT-symmetry in building laser geometries with enhanced performance and, at the same time, useful output power levels and emission characteristics.more » « less
-
Synchronously pumped optical parametric oscillators (OPOs) are highly efficient sources of long-wavelength pulses and nonclassical light, making them invaluable for applications in spectroscopy, metrology, multi-photon microscopy, and quantum computation. Typical systems based on free-space cavities either operate non-degenerately, which limits their efficiency, or use active feedback control to achieve degenerate operation, which limits these systems to dedicated low-noise environments. In this work, we demonstrate a femtosecond monolithically integrated OPO. In contrast with bulk OPOs, our monolithic 10 GHz cavity, based on reverse-proton-exchanged lithium niobate, operates stably without active locking. By detuning the repetition rate of the free-running pump laser from the cavity free spectral range, we control the intracavity pulse dynamics and observe many of the operating regimes previously encountered in free-space degenerate OPOs, such as box-pulsing and quadratic bright-dark solitons (simultons), in addition to non-degenerate operation. When operated in the simulton regime and pumped with 125 fs pulses at 1 µm, this monolithic OPO chip outputs broadband sech2pulses (63 nm, 3 dB) with tens of milliwatts of average power.more » « less
-
Abstract Femtosecond laser‐induced damage threshold (LIDT) testing is carried out at 515 nm on 4‐mm‐sized metalens arrays that are manufactured by direct nanoimprinting of a TiO2nanoparticle (NP)‐based ink containing either polymeric or inorganic binders. The all‐inorganic TiO2metalenses exhibit ≈80% absolute focusing efficiency and demonstrate an LIDT of ≈90 mJ cm−2based on a single‐shot determination using Liu's method, while the metalenses with the polymeric binder achieve ≈137 mJ cm−2and an efficiency of ≈76%. Despite the higher LIDT of the TiO2‐polymer composite metalenses in the single‐shot experiment, these lenses exhibit significant damage at fluences as low as ≈8 mJ cm−2when subjected to ≈6 × 10⁸ pulses at 60 kHz. On the other hand, the all‐inorganic metalenses remain intact under identical conditions at ≈64 mJ cm−2. That is, the inorganic binder provides superior long‐term stability relative to the polymeric binder and is a more viable solution for high‐energy applications. Structural damages observed in nanostructures result in a reduced deflection efficiency and increase light scattering at the focal plane of the metalens. The LIDT testing is also performed in the nanosecond regime at 532 and 1064 nm with the all‐inorganic metalenses, yielding thresholds of ≈0.5 and ≈5 J cm−2, respectively.more » « less
-
The generation of shaped laser beams, or structured light, is of interest in a wide range of fields, from microscopy to fundamental physics. There are several ways to make shaped beams, most commonly using spatial light modulators comprised of pixels of liquid crystals. These methods have limitations on the wavelength, pulse duration, and average power that can be used. Here we present a method to generate shaped light that can be used at any wavelength from the UV to IR, on ultrafast pulses, and a large range of optical powers. By exploiting the frequency difference between higher-order modes, a result of the Gouy phase, and cavity mode matching, we can selectively couple into a variety of pure and composite higher-order modes. Optical cavities are used as a spatial filter and then combined with sum-frequency generation in a nonlinear crystal as the output coupler to the cavity to create ultrafast, frequency comb structured light.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1364/OPTICA.497275
