skip to main content


This content will become publicly available on February 22, 2025

Title: Optimizing Polarization Selective Unidirectional Photoluminescence from Phased‐Array Metasurfaces
Abstract

Metasurface‐based optical elements offer a wide design space for miniature and lightweight optical applications. Typically, metasurface optical elements transform an incident light beam into a desired output waveform. Recent demonstrations of light‐emitting metasurfaces highlight the potential for directly producing desired output waveforms via metasurface‐mediated spontaneous emission. In this work, reciprocal finite‐difference time‐domain (FDTD) simulations and machine learning are used to enable the inverse design of highly unidirectional photoluminescent III‐Nitride quantum well metasurfaces capable of directivep‐,s‐, or combinedp‐ ands‐ polarized emission at arbitrary angles. In comparison with previous intuition‐guided designs using the same quantum well architectures, the inverse design approach enables new polarization capabilities and experimentally demonstrated improvements in directivity of 54%. An analysis of ways in which the inverse design both validates and contradicts previous intuition‐guided design heuristics is presented. Ultimately, the combination of reciprocal simulations and efficient global optimization (EGO) grants remarkable improvements in emission directivity and results in full control over the polarization and momentum of emitted light, including simultaneous directional emission ofs‐ andp‐polarized light.

 
more » « less
PAR ID:
10492227
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Optical Materials
ISSN:
2195-1071
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Metasurfaces composed of in‐plane subwavelength nanostructures have unprecedented capability in manipulating the amplitude, phase, and polarization states of light. Here, a unique type of direction‐controlled bifunctional metasurface polarizer is proposed and experimentally demonstrated based on plasmonic stepped slit‐groove dimers. In the forward direction, a chiral linear polarizer is enabled which only allows the transmission of a certain incident handedness and converts it into the specified linear polarization. In the backward direction, the metasurface functions as an anisotropic circular polarizer to selectively convert a certain linear polarization component into the desired circularly polarized transmission. The observed direction‐controlled polarization selection and conversion are explained by the spin‐dependent mode coupling process inside the bilayer structure. Anisotropic chiral imaging based on the proposed metasurface polarizer is further demonstrated. The results provide new degrees of freedom to realize future multifunctional photonic integrated devices for structured light conversion, vector beam generation, optical imaging and sensing, and optical communication.

     
    more » « less
  2. Abstract

    Phase, polarization, amplitude, and frequency represent the basic dimensions of light, playing crucial roles for both fundamental light–material interactions and all major optical applications. Metasurfaces have emerged as a compact platform to manipulate these knobs, but previous metasurfaces have limited flexibility to simultaneous control them. A multi‐freedom metasurface that can simultaneously and independently modulate phase, polarization, and amplitude in an analytical form is introduced, and frequency multiplexing is further realized by ak‐space engineering technique. The multi‐freedom metasurface seamlessly combines geometric Pancharatnam–Berry phase and detour phase, both of which are frequency independent. As a result, it allows complex‐amplitude vectorial hologram at various frequencies based on the same design strategy, without sophisticated nanostructure searching of massive geometric parameters. Based on this principle, full‐color complex‐amplitude vectorial meta‐holograms in the visible are experimentally demonstrated with a metal–insulator–metal architecture, unlocking the long‐sought full potential of advanced light field manipulation through ultrathin metasurfaces.

     
    more » « less
  3. Abstract

    All‐optical control and detection of magnetic states for high‐density recording necessitate nanophotonic approaches to amplify local light intensity below the diffraction limit. Sculpting the near‐field phase and polarization can additionally strengthen magneto‐optical effects that rely on circularly polarized pulses, such as all‐optical helicity‐dependent switching, imaging, and spin‐wave excitation. Here, high‐refractive‐index dielectric nanoantennas illuminated with circularly polarized light resonantly enhance local electric field rotation by more than sixfold within [Pt/Co]Nthin films. Sub‐wavelength arrays of amorphous Si nanodisks, or metasurfaces, patterned on perpendicularly magnetized films support Mie‐type resonances that modulate reflection and transmission dissymmetry by >±2% in experiments. Spatial and spectral interference between dipolar modes, proximity effects, and gain are evaluated by varying disk aspect ratio, metasurface–metal separation, and magnetic film thickness, respectively. Simulated enhancements in magnetic circular birefringence and differential absorption are correlated with amplified local field rotation at electric dipolar modes. Greater achievable amplifications are shown via simulations with single‐crystalline Si metasurfaces exhibiting lower losses, including a 12‐fold strengthened electric field rotation within ferromagnetic layers. The metasurface design rules established here could enable nanoscale localization of all‐optical magnetic switching with lowered laser fluence thresholds, as well as enhanced magneto‐optical responses for light‐assisted reading in spintronic devices.

     
    more » « less
  4. Metasurfaces consisting of an array of planar sub-wavelength structures have shown great potentials in controlling thermal infrared radiation, including intensity, coherence, and polarization. These capabilities together with the two-dimensional nature make thermal metasurfaces an ultracompact multifunctional platform for infrared light manipulation. Integrating the functionalities, such as amplitude, phase (spectrum and directionality), and polarization, on a single metasurface offers fascinating device responses. However, it remains a significant challenge to concurrently optimize the optical, electrical, and thermal responses of a thermal metasurface in a small footprint. In this work, we develop a center-contacted electrode line design for a thermal infrared metasurface based on a gold nanorod array, which allows local Joule heating to electrically excite the emission without undermining the localized surface plasmonic resonance. The narrowband emission of thermal metasurfaces and their robustness against temperature nonuniformity demonstrated in this work have important implications for the applications in infrared imaging, sensing, and energy harvesting.

     
    more » « less
  5. Abstract

    Dynamic control over the polarization state of light is foundational for many scientific and technological applications, yet it remains a challenge to dynamically tailor responses with arbitrary polarization bases over a broad bandwidth. Broadband metasurface systems that utilize microscale displacements between two metasurfaces to enable reconfigurable polarization responses within a predefined polarization basis are reported. The metasurface pairs form an interferometer, and the lateral displacements produce detour phase shifts within the interferometer beam paths that mediate polarization state tuning. It is shown how the metasurface systems can be designed using freeform topology optimization to enable tailorable elliptical birefringence responses over a large bandwidth and how cascaded metasurface systems can enable the mapping of input and output polarization states between any two points on the Poincare sphere. It is anticipated that these concepts will have utility in imaging, display, communications, and metrology applications in classical and quantum optical domains.

     
    more » « less