An official website of the United States government
Communication presents a critical challenge for emerging intermittently powered batteryless sensors. Batteryless devices that operate entirely on harvested energy often experience frequent, unpredictable power outages and have trouble keeping time accurately. Consequently, effective communication using today’s low-power wireless network standards and protocols becomes difficult, particularly because existing standards are usually designed to support reliably powered devices with predictable node availability and accurate timekeeping capabilities for connection and congestion management. In this article, we present Greentooth, a robust and energy-efficient wireless communication protocol for intermittently powered sensor networks. It enables reliable communication between a receiver and multiple batteryless sensors using Time Division Multiple Access–style scheduling and low-power wake-up radios for synchronization. Greentooth employs lightweight and energy-efficient connections that are resilient to transient power outages, while significantly improving network reliability, throughput, and energy efficiency of both the battery-free sensor nodes and the receiver—which could be untethered and energy constrained. We evaluate Greentooth using a custom-built batteryless sensor prototype on synthetic and real-world energy traces recorded from different locations in a garden across different times of the day. Results show that Greentooth achieves 73% and 283% more throughput compared to Asynchronous Wake-up on Demand MAC and Receiver-Initiated Consecutive Packet Transmission Wake-up Radios, respectively, under intermittent ambient solar energy and over 2× longer receiver lifetime.
more »
« less
MANIC: A $19\mu\mathrm{W}$ @ 4MHz, 256 MOPS/mW, RISC-V microcontroller with embedded MRAM main memory and vector-dataflow co-processor in 22nm bulk finFET CMOS
Whether powered by a battery or energy harvested from the environment, low-power (LP) sensor devices require extreme energy efficiency. These sorts of devices are becoming pervasive, running increasingly sophisticated applications in inhospitable environments. We present Manic, an energy-efficient microcontroller (MCU) augmented with a vector-dataflow (VDF) co-processor. The testchip taped out on a 22nm bulk finFET CMOS process demonstrates that Manic is 60% more energy-efficient than a baseline, scalar, low-power MCU, achieving peak efficiency of 256 MOPS/mW (2.6× prior work) while consuming only 19.1μW (@4MHz). To make the system viable for intermittently powered applications that require non-volatile storage, Manic includes a 256KB embedded MRAM.
more »
« less
- Award ID(s):
- 1815882
- PAR ID:
- 10492634
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- 2023 IEEE International Symposium on Circuits and Systems (ISCAS)
- ISBN:
- 978-1-6654-5109-3
- Page Range / eLocation ID:
- 1 to 4
- Format(s):
- Medium: X
- Location:
- Monterey, CA, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Charge-recycling based AC computing has recently been proposed to significantly increase energy efficiency in wirelessly powered devices. The power consumption is reduced by 1) eliminating the rectification and regulation stages of traditional DC computing and 2) recycling charge through AC computing. An alternative charge-recycling mechanism is proposed in this paper that does not require a phase shifter or peak detector, thereby reducing the overhead power consumption. Simulation results in 45 nm technology demonstrate that an additional 60% reduction in power consumption can be achieved while operating at the same frequency. As compared to the traditional case, power consumption is reduced by more than an order of magnitude.more » « less
-
A potentiostat is an analytical device and a crucial component in electrochemical instruments used for studying chemical reaction mechanisms, with potential applications in early diagnosis of disease or critical health conditions. Conventional potentiostats are typically benchtop devices designed for laboratory use, whereas a wearable potentiostat can be interfaced with biochemical sensors for disease diagnostics at home. This work presents a low-power potentiostat designed to connect with a sensor array consisting of eight to ten working electrodes. The potentiostat is capable of running Electrochemical Impedance Spectroscopy and Cyclic Voltammetry. The system is powered by lithium-ion batteries and uses Bluetooth for data transmission to the user. A single ARM M4 microcontroller, integrated with a Bluetooth low-energy radio module, controls the entire system. The accuracy, reliability, and power efficiency of the potentiostat were evaluated and compared against existing commercial benchtop potentiostats. Additionally, we have outlined future steps to enhance circuit miniaturization and power efficiency, aiming to develop fully integrated wearable sensing devices comparable in size to a wristwatch.more » « less
-
Self-powered biosensors are innovative devices that can detect and analyze biological or chemical substances without the need for an external power source. These biosensors can convert energy from the surrounding environment or the analyte itself into electrical signals for sensing and data transmission. The self-powered nature of these biosensors offers several advantages, such as portability, autonomy, and reduced waste generation from disposable batteries. They find applications in various fields, including healthcare, environmental monitoring, food safety, and wearable devices. While self-powered biosensors are a promising technology, there are still challenges to address, such as improving energy efficiency, sensitivity, and stability to make them more practical and widely adopted. This review article focuses on exploring the evolving trends in self-powered biosensor design, outlining potential advantages and limitations. With a focal point on enzymatic biofuel cell power generation, this article describes various sensing mechanisms that employ the analyte as substrate or fuel for the biocatalyst’s ability to generate current. Technical aspects of biofuel cells are also examined. Research and development in the field of self-powered biosensors is ongoing, and this review describes promising areas for further exploration within the field, identifying underexplored areas that could benefit from further investigation.more » « less
-
Algorithm-hardware Co-optimization for Energy-efficient Drone Detection on Resource-constrained FPGAConvolutional neural network (CNN)-based object detection has achieved very high accuracy; e.g., single-shot multi-box detectors (SSDs) can efficiently detect and localize various objects in an input image. However, they require a high amount of computation and memory storage, which makes it difficult to perform efficient inference on resource-constrained hardware devices such as drones or unmanned aerial vehicles (UAVs). Drone/UAV detection is an important task for applications including surveillance, defense, and multi-drone self-localization and formation control. In this article, we designed and co-optimized an algorithm and hardware for energy-efficient drone detection on resource-constrained FPGA devices. We trained an SSD object detection algorithm with a custom drone dataset. For inference, we employed low-precision quantization and adapted the width of the SSD CNN model. To improve throughput, we use dual-data rate operations for DSPs to effectively double the throughput with limited DSP counts. For different SSD algorithm models, we analyze accuracy or mean average precision (mAP) and evaluate the corresponding FPGA hardware utilization, DRAM communication, and throughput optimization. We evaluated the FPGA hardware for a custom drone dataset, Pascal VOC, and COCO2017. Our proposed design achieves a high mAP of 88.42% on the multi-drone dataset, with a high energy efficiency of 79 GOPS/W and throughput of 158 GOPS using the Xilinx Zynq ZU3EG FPGA device on the Open Vision Computer version 3 (OVC3) platform. Our design achieves 1.1 to 8.7× higher energy efficiency than prior works that used the same Pascal VOC dataset, using the same FPGA device, but at a low-power consumption of 2.54 W. For the COCO dataset, our MobileNet-V1 implementation achieved an mAP of 16.8, and 4.9 FPS/W for energy-efficiency, which is ∼ 1.9× higher than prior FPGA works or other commercial hardware platforms.more » « less
