skip to main content


This content will become publicly available on February 24, 2025

Title: Leveraging Crystallization Pathway to Control Structure in Hf 0.5 Zr 0.5 O 2 Nanoparticles

Hf0.5Zr0.5O2‐based materials have garnered significant attention for applications requiring ferroelectricity at the nanoscale. This behavior arises due to the stabilization of metastable phases at room temperature. However, the synthesis of phase pure Hf0.5Zr0.5O2remains a challenging problem in both thin films and nanoparticles. Herein, the crystallization of Hf0.5Zr0.5O2nanoparticles from an as‐synthesized amorphous phase is studied. By tailoring the aggregate nature of the intermediate amorphous nanoparticles via different drying processes, the crystallization pathway can be altered, resulting in significant differences in crystal structure, crystallite size, and crystallite morphology after calcination. X‐ray diffraction (XRD) and Rietveld refinement show the dominant crystallographic phase changes from a monoclinic structure to a cubic structure for samples with decreased aggregation. Samples prepared via freeze drying exhibit the most aggregation control and correspond with the observation of single‐crystalline particle aggregates and branching structures attributed to a crystallization by particle attachment mechanism. Herein, differing crystallization pathways lead to unique crystal morphologies that stabilize the traditionally high‐temperature phases of Hf0.5Zr0.5O2‐based materials that are necessary for functional applications.

 
more » « less
NSF-PAR ID:
10494713
Author(s) / Creator(s):
 ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Engineering Materials
ISSN:
1438-1656
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1.  
    more » « less
  2. Abstract

    Phase‐pure [NiO]0.5[Al2O3]0.5spinel nanoparticles (NPs) with limited aggregation were obtained via liquid‐feed flame spray pyrolysis (LF‐FSP) by combusting metalloorganic precursor solutions. Thereafter “chocolate chip‐like” Nix[NiO0.5‐x][Al2O3]0.5nanoparticles consisting of primary [NiO0.5‐x][Al2O3]0.5particles with average particle sizes of 40‐60 nm decorated with Ni metal particles (<10 nm in diameter) dispersed on the surface were synthesized by heat treating the spinel NPs at 800°C/7 h in flowing 5% H2:N2100 mL/min in a fluidized bed reactor. The synthesized materials were characterized using TEM, XRD, FTIR, and TGA/DTA. The Ni depleted areas consist primarily of γ‐Al2O3. The Ni content (800°C) was determined by TGA to be ≈11.3 wt.% based on TGA oxidation behavior. The successful synthesis of such nanocomposites with limited aggregation on a high temperature support provides a facile route to synthesize well‐defined NP catalysts. This work serves as a baseline study for an accompanying paper, wherein thin, flexible, dense films made from these same NPs are used as regenerable catalysts for carbon nanotube syntheses.

     
    more » « less
  3. Abstract

    Ferroelectric switching is demonstrated in CeO2‐doped Hf0.5Zr0.5O2(HZCO) thin films with application in back‐end‐of‐line compatible embedded memories. At low cerium oxide doping concentrations (2.0–5.6 mol%), the ferroelectric orthorhombic phase is stabilized after annealing at temperatures below 400 °C. HZCO ferroelectrics show reliable switching characteristics beyond 1011cycles in TiN/HZCO/TiN capacitors, several orders of magnitude greater than identically processed Hf0.5Zr0.5O2(HZO) capacitors, without sacrificing polarization and retention. Internal photoemission and photoconductivity experiments show that CeO2‐doping introduces in‐gap states in HZCO that are nearly aligned with TiN Fermi level, facilitating electron injection through these states. The enhanced average bulk conduction, which may lead to more uniform thermal dissipation in the HZCO films, delays irreversible degradation via breakdown that leads to device failure after repeated programming cycles.

     
    more » « less
  4. Abstract

    As an emerging nonvolatile memory technology, HfO2‐based ferroelectrics exhibit excellent compatibility with silicon CMOS process flows; however, the reliability of polarization switching in these materials remains a major challenge. During repeated field programming and erase of the polarization state of initially pristine HfO2‐based ferroelectric capacitors, the magnitude of the measured polarization increases, a phenomenon known as “wake‐up”. In this study, the authors attempt to understand what causes the wake‐up effect in Hf0.5Zr0.5O2(HZO) capacitors using nondestructive methods that probe statistically significant sample volumes. Synchrotron X‐ray diffraction reveals a concerted shift in HZO Bragg peak position as a function of polarization switching cycle number in films prepared under conditions such that they exhibit extremely large (≈3000%) wake‐up. In contrast, a control sample with insignificant wake‐up shows no such peak shift. Capacitance – voltage measurements show evolution in the capacitance loop with switching cycle number for the wake‐up sample and no change for the control sample. Piezoresponse force microscopy measurements are utilized to visualize the domain switching with wake‐up. The combination of these observations clearly demonstrates that wake‐up is caused by a field‐driven phase transformation of the tetragonal phase to the metastable ferroelectric orthorhombic phase during polarization switching of HZO capacitors.

     
    more » « less
  5. We report the dielectric Properties of HfO 2 -based films in the optical–high frequency range. The demonstrated tunability of the optical dielectric constant of HfO 2 -based compounds is of great relevance for optoelectronic applications, e.g., high-refractive index dielectrics for nanoantenna and optical coatings for electronic displays. Since the optical dielectric constant of HfO 2 is determined by the electronic structure and its crystal environment, we tune the physical properties of HfO 2 films on MgO by adding different dopants. In this work, we aim to determine the influence of doping together with the resulting crystal structure on the optical dielectric constant. Hence, we studied 20 mol. % Y-doped HfO 2 (HYO), Hf 0.5 Zr 0.5 O 2 (HZO), and Hf 0.5 Ce 0.5 O 2 (HCO). Among the dopants, Y 2 O 3 has the lowest, ZrO 2 an intermediate, and CeO 2 the highest real part of the optical dielectric constant. The optical dielectric constant is found to be lowest in the cubic HYO films. An intermediate dielectric constant is found in HZO films that is predominantly in the monoclinic phase, but additionally hosts the cubic phase. The highest dielectric constant is observed in HCO films that are predominantly in the cubic phase with inclusions of the monoclinic phase. The observed trend is in good agreement with the dominant role of the dopant type in setting the optical dielectric constant. 
    more » « less